Slab analysis of asymmetrical sheet rolling

Abstract In this paper, a theoretical model based on slab method of analysis for plane strain asymmetrical rolling is presented. In this model the non-uniformity of the normal and shear stresses in deriving of the governing equations are considered. This model can predict the required external loading to the plate at entry to keep the plate horizontal. The analytical rolling force, torque and pressure of this model were compared with the experimental and analytical results of other investigators. Numerical and experimental results are shown to be in good agreements.

[1]  W. Johnson,et al.  A theoretical and experimental investigation into asymmetrical hot rolling , 1974 .

[2]  Yeong-Maw Hwang,et al.  An analytical approach to asymmetrical hot-sheet rolling considering the effects of the shear stress and internal moment at the roll gap , 1995 .

[3]  Jerzy Mischke.  Equations of strip equilibrium during asymmetrical flat rolling , 1996 .

[4]  Werner Schwenzfeier,et al.  Analysis of the bending of the rolling material in asymmetrical sheet rolling , 2000 .

[5]  Dyi-Cheng Chen,et al.  Study on Asymmetrical Sheet Rolling by the Finite Element Method , 1999 .

[6]  Yeong-Maw Hwang,et al.  An analytical approach to asymmetrical cold- and hot-rolling of clad sheet using the slab method , 1996 .

[7]  Gow-Yi Tzou,et al.  Relationship between frictional coefficient and frictional factor in asymmetrical sheet rolling , 1999 .

[8]  Gow-Yi Tzou,et al.  Analytical and experimental study on asymmetrical sheet rolling , 1997 .

[9]  P. Dewhurst,et al.  A slipline field analysis of asymmetrical hot rolling , 1975 .

[10]  Y. M. Hwang,et al.  Analysis of asymmetrical clad sheet rolling by stream function method , 1996 .

[11]  Y. Hwang,et al.  Analysis of asymmetrical hot strip rolling by the slab method , 1995, Journal of Materials Engineering and Performance.

[12]  M. I. Ghobrial,et al.  A photoelastic investigation on the contact stresses developed in rolls during asymmetrical flat rolling , 1989 .

[13]  D. H. Sansome,et al.  An experimental study of the effect of roll-speed mismatch on the rolling load during the cold rolling of thin strip , 1982 .

[14]  Rajiv Shivpuri,et al.  Finite element investigation of curling in non-symmetric rolling of flat stock , 1988 .

[15]  Richard L. Holbrook,et al.  Effects of Nonsymmetry in Strip Rolling on Single-Roll Drive Mills , 1966 .