Investigations into the cumulative fatigue life of an AISI 304L austenitic stainless steel used for pressure water reactors: Application of a double linear damage rule

In order to investigate cumulative damage in fatigue, a multi-level fatigue programme has been carried out on an austenitic stainless steel AISI 304L. All the tests have been performed under controlled strain-amplitude conditions, with several changes of levels up to rupture; values of strain-amplitude were included between 0.20% and 0.80%. The present experimental programme shows that applying a linear damage rule (LDR), also referred to as Palmgren–Miner’s rule, has been demonstrated to be unreliable in some cases. A loading sequence (loading history) effect is clearly shown for the two-level sequence tests; application of the LDR leads to residual fatigue-life overestimation for high-to-low loading (H–L) sequences whereas residual fatigue-life is underestimated for low-to-high loading (L–H) sequences. The multi-level and block tests, undertaken in this campaign, confirm also a possible non-verification of the LDR. Within this framework, the double linear damage rule (DLDR) has been tested. Its application would seem to be promising as an additional approach in certain situations. However, complex sequences and random fatigue tests are still needed to draw a conclusion, and to more clearly evaluate the conditions where use of the LDR would not be sufficient.

[1]  Robert Benton.  Double-Linear Cumulative-Damage Reliability Method , 2011 .

[2]  T. Bui-Quoc,et al.  Multilevel Strain Controlled Fatigue on a Type 304 Stainless Steel , 1983 .

[3]  E. W. C. Wilkins,et al.  Cumulative damage in fatigue , 1956 .

[4]  Gary R. Halford.  Cumulative fatigue damage modeling-crack nucleation and early growth , 1997 .

[5]  G. R. Halford,et al.  Re-examination of cumulative fatigue damage analysis—an engineering perspective , 1986 .

[6]  J. C. Freche,et al.  Application of a double linear damage rule to cumulative fatigue , 1967 .

[7]  M. Fivel,et al.  Effect of grain disorientation on early fatigue crack propagation in face-centred-cubic polycrystals: A three-dimensional dislocation dynamics investigation , 2013, 1310.1210.

[8]  Xu Hao,et al.  Two-stage fatigue damage cumulative rule , 1992 .

[9]  A. Fissolo,et al.  A First Investigation on Cumulative Fatigue Life for a Type 304-L Stainless Steel Used for Pressure Water Reactor , 2009 .

[10]  L. G. Garza,et al.  A Digital Image Processing Technique for Quantification of Surface Hot-Shortness Cracks , 2006 .

[11]  Jean-Christophe Le Roux,et al.  On the high cycle fatigue behavior of a type 304L stainless steel at room temperature , 2012 .

[12]  L. P. Borrego,et al.  Fatigue behaviour of AA6082 friction stir welds under variable loadings , 2012 .

[13]  Martina Zimmermann,et al.  Very high cycle fatigue behaviour of austenitic stainless steel and the effect of strain-induced martensite , 2010 .

[14]  K. Miller.  THE SHORT CRACK PROBLEM , 1982 .

[15]  Yl Lee,et al.  Damage-Based Models for Step-Stress Accelerated Life Testing , 2006 .

[16]  A. Fissolo,et al.  Thermal fatigue loading for a type 304-L stainless steel used for pressure water reactor: investigations on the effect of a nearly perfect biaxial loading, and on the cumulative fatigue life , 2010 .

[17]  S. S. Manson,et al.  Low cycle fatigue of notched specimens by consideration of crack initiation and propagation , 1967 .

[18]  G. R. Halford,et al.  Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage , 1981 .

[19]  K. J. Miller,et al.  What is fatigue damage? A view point from the observation of low cycle fatigue process , 2005 .

[20]  Horace Grover,et al.  An Observation Concerning the Cycle Ratio in Cumulative Damage , 1960 .

[21]  Jaap Schijve,et al.  Fatigue of Structures and Materials in the 20th Century and the State of the Art. , 2003 .

[22]  Ali Fatemi,et al.  Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials , 1998 .

[23]  P. Haušild,et al.  Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel , 2010 .

[24]  Michael D. Sangid,et al.  The physics of fatigue crack initiation , 2013 .