Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation

[1]  D. Chicot,et al.  Self-calibration in compliance and indenter tip defect for instrumented indentation , 2022, Journal of Materials Research.

[2]  B. Devincre,et al.  On the origin of the Hall–Petch law: A 3D-dislocation dynamics simulation investigation , 2021 .

[3]  M. Morgan,et al.  Materials characterization part I: contact area of the Berkovich indenter for nanoindentation tests , 2017 .

[4]  Alain Iost,et al.  Modeling the composite hardness of multilayer coated systems , 2015 .

[5]  E. S. Puchi-Cabrera,et al.  A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film , 2014 .

[6]  F. Yuan,et al.  Grain size effect on the hardness of nanocrystal measured by the nanosize indenter , 2013 .

[7]  H. Mestdagh,et al.  Real-time quantitative analysis of volatile products generated during solid-state polypropylene thermal oxidation , 2013 .

[8]  E. S. Puchi-Cabrera,et al.  Analysis of indentation size effect in copper and its alloys , 2013 .

[9]  S. Han,et al.  A physically based model for indenter tip shape calibration for nanoindentation , 2010 .

[10]  G. Guillemot,et al.  A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films , 2009 .

[11]  Alexander M. Korsunsky,et al.  Work of indentation approach to the analysis of hardness and modulus of thin coatings , 2006 .

[12]  Konstantinos-Dionysios Bouzakis,et al.  Indenter surface area and hardness determination by means of a FEM-supported simulation of nanoindentation , 2006 .

[13]  E. S. Puchi-Cabrera.  Computation of Composite Hardness Of Coated Systems , 2004 .

[14]  H. Miao,et al.  Analysis of the nanoindentation data measured with a Berkovich indenter for brittle materials: effect of the residual contact stress , 2004 .

[15]  Steve Bull,et al.  On the origins and mechanisms of the indentation size effect , 2003 .

[16]  E. S. Puchi-Cabrera.  A new model for the computation of the composite hardness of coated systems , 2002 .

[17]  Takeshi Sawa,et al.  Simplified method for analyzing nanoindentation data and evaluating performance of nanoindentation instruments , 2001 .

[18]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .

[19]  D. Chicot,et al.  Dureté des revêtements épais : modification du modèle de Jönsson et Hogmark , 1998 .

[20]  D. Chicot,et al.  Absolute hardness of films and coatings , 1995 .

[21]  R. Bradt,et al.  The microhardness indentation load/size effect in rutile and cassiterite single crystals , 1993, Journal of Materials Science.

[22]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[23]  George M. Pharr,et al.  On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .

[24]  T. Page,et al.  An explanation of the indentation size effect in ceramics , 1989 .

[25]  S. Hogmark,et al.  Hardness measurements of thin films , 1984 .

[26]  S. K. Bahl,et al.  Thermopower in Thin‐Film Copper—Constantan Couples , 1968 .

[27]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .