Microfluidic gas sensor with integrated pumping system

In this study a gas detection microfluidic system with a gas integrated pumping by thermal creep was realized. First, microfluidic and thermal simulations were done to determine the microsystem dimensions. Heat distribution in all microsystem was then simulated using Comsol Multiphysics software. These results allowed us the best material choices suited for our application. The microsystem includes an integrated gas sensor in a microchannel, with heater and trioxide tungsten (WO 3) sensitive layer. Conventional microelectronic methods have been used to achieve this microsystem. The thermal stability and the temperature gradient within the microsystem have been studied. Finally, the first microsystem tests under ammonia with concentrations between 10 and 100 ppm at 473 K have been made and give reproducible conductivity variations.

[1]  K. Aguir,et al.  A dynamic response model for the WO3-based ozone sensors , 2008 .

[2]  I. Graur,et al.  Continuum analytical modelling of thermal creep , 2008 .

[3]  N. Yamazoe.  New approaches for improving semiconductor gas sensors , 1991 .

[4]  N. Bârsan,et al.  Micromachined metal oxide gas sensors: opportunities to improve sensor performance , 2001 .

[5]  Khalifa Aguir,et al.  Characterization of ozone sensors based on WO3 reactively sputtered films: influence of O2 concentration in the sputtering gas, and working temperature , 2004 .

[6]  G. Bird.  Molecular Gas Dynamics and the Direct Simulation of Gas Flows , 1994 .

[7]  Todd E. Mlsna,et al.  Chemicapacitive microsensors for volatile organic compound detection , 2003 .

[8]  Ralf Moos,et al.  Selective ammonia exhaust gas sensor for automotive applications , 2002 .

[9]  Khalifa Aguir,et al.  High performance of a gas identification system using sensor array and temperature modulation , 2007 .

[10]  R. Ghodssi,et al.  A fast-response microfluidic gas concentrating device for environmental sensing , 2007 .

[11]  Carles Cané,et al.  Sensitivity and selectivity improvement of rf sputtered WO3 microhotplate gas sensors , 2006 .

[12]  M. Bendahan,et al.  WO3 sensor response according to operating temperature: Experiment and modeling , 2007 .

[13]  John F. Vetelino,et al.  A semiconducting metal oxide sensor array for the detection of NOx and NH3 , 2001 .

[14]  F. Sharipov,et al.  Non-isothermal flow of rarefied gas through a long pipe with elliptic cross section , 2009 .

[15]  F. Solzbacher,et al.  Gas-sensing characteristics of modified-MoO3 thin films using Ti-overlayers for NH3 gas sensors , 2000 .

[16]  Likun Zhu,et al.  Integrated microfluidic gas sensor for detection of volatile organic compounds in water , 2007 .

[17]  Kiran Jain,et al.  Highly sensitive NH3 sensor using Pt catalyzed silica coating over WO3 thick films , 2008 .

[18]  Carles Cané,et al.  Ozone monitoring by micro-machined sensors with WO3 sensing films , 2007 .

[19]  Khalifa Aguir,et al.  Thermal modelling of a WO3 ozone sensor response , 2005 .

[20]  R. S. Falconer,et al.  Stability, sensitivity and selectivity of tungsten trioxide films for sensing applications , 1993 .

[21]  K. Toda,et al.  Micro gas analyzers for environmental and medical applications. , 2008, Analytica chimica acta.

[22]  W. Benecke,et al.  Microreactors and microfluidic systems: an innovative approach to gas sensing using tin oxide-based gas sensors , 2001 .

[23]  A. Manz,et al.  Micro total analysis systems. Latest advancements and trends. , 2006, Analytical chemistry.

[24]  K. Aguir,et al.  Correlation between rf-sputtering parameters and WO3 sensor response towards ozone , 2007 .

[25]  M. Maaref,et al.  dc and ac characterizations of WO3 sensors under ethanol vapors , 2006 .