论文信息 - Modeling of a Cable-Based Revolute Joint Using Biphasic Media Variable Stiffness Actuation - 字舞流文

Modeling of a Cable-Based Revolute Joint Using Biphasic Media Variable Stiffness Actuation

Matteo Zoppi | Vishal Ramadoss | Giorgio Cannata | Rezia Molfino | Jesus Hiram Lugo Calles | G. Cannata | M. Zoppi | R. Molfino | Vishal Ramadoss

[1] Joono Cheong,et al. Stiffness analysis and experimental validation of modular-type hybrid antagonistic tendon-driven joint systems , 2018, Robotica.

[2] Guilin Yang,et al. Design and analysis of a cable-driven manipulator with variable stiffness , 2013, 2013 IEEE International Conference on Robotics and Automation.

[3] Han Bo,et al. Application of a Biphasic Actuator in the Design of a Robot Gripper for Garment Handling , 2014 .

[4] Matteo Zoppi,et al. Application of a Biphasic Actuator in the Design of the CloPeMa Robot Gripper , 2015 .

[5] Venkat Krovi,et al. A Cable Based Active Variable Stiffness Module With Decoupled Tension , 2014 .

[6] Matteo Zoppi,et al. Development and Analysis of a New Specialized Gripper Mechanism for Garment Handling , 2013 .

[7] Matteo Zoppi,et al. Variable impedance actuation using biphasic media , 2013 .

[8] G. Cannata,et al. Modeling and Simulation of a Biphasic Media Variable Stiffness Actuator , 2020 .

[9] Manuel G. Catalano,et al. Variable impedance actuators: A review , 2013, Robotics Auton. Syst..

[10] Guilin Yang,et al. Design optimization for a 2-DOF cable-driven joint with large stiffness range , 2017, 2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA).

[11] Elizabeth A. Brackbill,et al. Dynamics and control of a 4-dof wearable cable-driven upper arm exoskeleton , 2009, 2009 IEEE International Conference on Robotics and Automation.