Design of the First Italian Roundabout with Jointed Plain Concrete Pavement

This work presents the results of the overall design of the first Italian roundabout with jointed plain concrete pavement. The examined case study complies with current international standards and practices for geometry of roundabouts and road pavements. The construction of a concrete pavement in an urban roundabout will better manage and slow down fast vehicular flows, and increase traffic fluidity in an important junction, trafficked by heavy vehicles, where maintenance works should be reduced to avoid queues. The design of the roundabout involved several competences for: defining the geometry of the four-arm junction, designing the thickness of the jointed plain concrete pavement both on the circular crown and the arms, studying the mix design of a high resistance concrete. As regard to the pavement, the result of the study was an un-dowelled concrete pavement composed of square slabs laid on a cement concrete subbase and a granular layer. The shape of the slabs has been designed to optimize the structural performance of their material, which is a high strength concrete mix derived from an extensive laboratory test work. In general, the results summarized approaches typical of different design conditions: urban ones for traffic flow and safety needs; high-traffic ones for the chosen pavement type; airport ones for the absence of dowel and tie bars at the joints. Indeed, the article has highlighted that the design process of a concrete roundabout requires multiple analyses to consider various features and correctly re-design an existing urban junction. Its geometrical design, the structural design of the concrete pavement and the theoretical and experimental design of the concrete mix were the main phases of this process and they needed different competences to conduct comprehensive and appropriate analyses.

[1]  Paola Di Mascio,et al.  Economic Sustainability of Concrete Pavements , 2012 .

[2]  Giuseppe Loprencipe,et al.  Sustainable Pavement Management System in Urban Areas Considering the Vehicle Operating Costs , 2017 .

[3]  Eugene R. Russell,et al.  Integrating Roundabouts with Freight Roadway Networks , 2015 .

[4]  Giuseppe Cantisani,et al.  Technical and economic evaluation of lighting and pavement in Italian road tunnels , 2017 .

[5]  Giuseppe Cantisani,et al.  Evaluation methods for improving surface geometry of concrete floors: A case study , 2015 .

[6]  Luca Persia,et al.  Smeed's law and expected road fatality reduction: An assessment of the Italian case. , 2015, Journal of safety research.

[7]  Lucia Pennisi,et al.  Management of road infrastructure safety , 2016 .

[8]  Kjell Seim USE, DESIGN AND SAFETY OF SMALL ROUNDABOUTS IN NORWAY , 1991 .

[9]  Laura Moretti,et al.  Technical and Economic Sustainability of Concrete Pavements , 2014 .

[10]  Eugene R. Russell,et al.  Environmental impact of modern roundabouts , 2008 .

[11]  Paola Di Mascio,et al.  MANAGEMENT OF SIDEWALK MAINTENANCE TO IMPROVE WALKING COMFORT FOR SENIOR CITIZENS , 2017 .

[12]  Giuseppe Cantisani,et al.  Management of road tunnels: Construction, maintenance and lighting costs , 2016 .

[13]  Bhagwant Persaud,et al.  Safety Effect of Roundabout Conversions in the United States: Empirical Bayes Observational Before-After Study , 2001 .

[14]  H M Westergaard,et al.  STRESSES IN CONCRETE PAVEMENTS COMPUTED BY THEORETICAL ANALYSIS , 1926 .

[15]  Giuseppe Cantisani,et al.  THE INTEGRATED DESIGN OF URBAN ROAD INTERSECTIONS: A CASE-STUDY , 2012 .

[16]  Tomaž Tollazzi,et al.  Comparative Analysis of Four New Alternative Types of Roundabouts: "Turbo", "Flower", "Target" and "Four-Flyover" Roundabout , 2016 .

[17]  H Botma STATE OF THE ART OF ROUNDABOUTS IN NETHERLANDS , 1997 .

[18]  Eugene R. Russell,et al.  Using vehicle simulations to understand strategies for accommodating oversize, overweight vehicles at roundabouts , 2016 .

[19]  Rune Elvik,et al.  Effects on Road Safety of Converting Intersections to Roundabouts: Review of Evidence from Non-U.S. Studies , 2003 .

[20]  Elzbieta Macioszek Relationship between Vehicle Stream in the Circular Roadway of a One-Lane Roundabout and Traffic Volume on the Roundabout at Peak Hour , 2014, TST.

[21]  C Hydén,et al.  The effects on safety, time consumption and environment of large scale use of roundabouts in an urban area: a case study. , 2000, Accident; analysis and prevention.

[22]  G. Loprencipe,et al.  A Statistics Based Approach for Defining Reference Trajectories on Road Sections , 2013 .

[23]  R Wentz,et al.  Traffic calming for the prevention of road traffic injuries: systematic review and meta-analysis , 2003, Injury prevention : journal of the International Society for Child and Adolescent Injury Prevention.

[24]  M Corazzo,et al.  How to make traffic calming more walking friendly: Directions to increase intersections performances for pedestrians , 2003 .

[25]  S. Miccoli,et al.  Measuring Shared Social Appreciation of Community Goods: An Experiment for the East Elevated Expressway of Rome , 2015 .

[26]  Paola Di Mascio,et al.  Managing sidewalk pavement maintenance: A case study to increase pedestrian safety , 2016 .

[27]  Yang H. Huang,et al.  Pavement analysis and design , 1992 .

[28]  Eugene R. Russell,et al.  Accommodating Oversize/Overweight Vehicles at Roundabouts , 2013 .