Best Practices and Performance Metrics Using Force Control for Robotic Assembly

2 DISCLAIMER Certain trade names and company products are mentioned in the text or identified in certain illustrations. In no case does such an identification imply recommendation or endorsement by the National Institute of Standards and Technology, nor does it imply that the products are necessarily the best available for the purpose.

[1]  Daniel E. Whitney,et al.  Historical Perspective and State of the Art in Robot Force Control , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[2]  Danica Kragic,et al.  Learning grasping points with shape context , 2010, Robotics Auton. Syst..

[3]  Jing Xiao,et al.  Active compliant motion: a survey , 2005, Adv. Robotics.

[4]  Daniel E. Whitney,et al.  Quasi-Static Assembly of Compliantly Supported Rigid Parts , 1982 .

[5]  Heping Chen,et al.  Toward robotizing powertrain assembly , 2008, 2008 7th World Congress on Intelligent Control and Automation.

[6]  Friedrich Lange,et al.  Learning force control with position controlled robots , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[7]  Antonio Bicchi,et al.  Hands for dexterous manipulation and robust grasping: a difficult road toward simplicity , 2000, IEEE Trans. Robotics Autom..

[8]  Heinz Wörn,et al.  Mechanical System and Control System of a Dexterous Robot Hand , 2001 .

[9]  Jeremy A. Marvel,et al.  Automated learning for parameter optimization of robotic assembly tasks utilizing genetic algorithms , 2009, 2008 IEEE International Conference on Robotics and Biomimetics.

[10]  Dominique Deneux,et al.  Introduction to assembly features: an illustrated synthesis methodology , 1999, J. Intell. Manuf..

[11]  Daniel E. Whitney,et al.  Force Feedback Control of Manipulator Fine Motions , 1977 .

[12]  Yuichi Matsumoto,et al.  Analysis and experimental validation of force bandwidth for force control , 2006, IEEE Transactions on Industrial Electronics.

[13]  Marc Toussaint,et al.  Trajectory prediction in cluttered voxel environments , 2010, 2010 IEEE International Conference on Robotics and Automation.

[14]  Antonio Bicchi,et al.  Dexterous manipulation through rolling , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[15]  Ying Li,et al.  Design, creation, and validation of a comprehensive database infrastructure for robotic grasping , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[16]  Kazuhiro Kosuge,et al.  Human-robots collaboration system for flexible object handling , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[17]  Arthur C. Sanderson,et al.  Parts entropy methods for robotic assembly system design , 1984, ICRA.

[18]  Hamidullah,et al.  Assembly Features: Definition, Classification, and Instantiation , 2006, 2006 International Conference on Emerging Technologies.

[19]  Warren P. Seering,et al.  Understanding bandwidth limitations in robot force control , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[20]  Kazuo Tanie,et al.  Human-robot cooperative handling using virtual nonholonomic constraint in 3-D space , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[21]  Willem F. Bronsvoort,et al.  Assembly features in modeling and planning , 2000 .

[22]  Alexander Verl,et al.  Measuring the Collision Potential of Industrial Robots , 2010, ISR/ROBOTIK.

[23]  Barruquer Moner.  IX. References , 1971 .

[24]  Joris De Schutter,et al.  A study of active compliant motion control methods for rigid manipulators based on a generic scheme , 1987, ICRA.

[25]  Hassan Abdalla,et al.  A feature-based prototype system for the evaluation and optimisation of manufacturing processes , 1999 .

[26]  Pradeep K. Khosla,et al.  An Experimental Evaluation and Comparison of Explicit Force Control Strategies for Robotic Manipulators , 1992, 1992 American Control Conference.

[27]  Warren P. Seering,et al.  Assembly strategies for chamferless parts , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[28]  Jeffrey C. Trinkle,et al.  Dextrous manipulation by rolling and finger gaiting , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[29]  A. Bell,et al.  On-pendant robotic assembly parameter optimization , 2008, 2008 7th World Congress on Intelligent Control and Automation.

[30]  Wyatt S. Newman,et al.  Interpretation of force and moment signals for compliant peg-in-hole assembly , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[31]  Wyatt S. Newman,et al.  Force guided assemblies using a novel parallel manipulator , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[32]  W. S. Newman.  Stability and Performance Limits of Interaction Controllers , 1992 .

[33]  Neville Hogan,et al.  Impedance Control: An Approach to Manipulation , 1984, 1984 American Control Conference.

[34]  Antonio Bicchi,et al.  On making robots understand safety: Embedding injury knowledge into control , 2012, Int. J. Robotics Res..

[35]  Wyatt S. Newman,et al.  Improving robotic assembly performance through autonomous exploration , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[36]  Wyatt S. Newman,et al.  Towards automatic transfer of human skills for robotic assembly , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[37]  David L. Brock,et al.  Enhancing the dexterity of a robot hand using controlled slip , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[38]  D. S. Ahn,et al.  Learning Assembly Strategies for Chamferless Parts , 1993 .

[39]  Danica Kragic,et al.  Integrating grasp planning with online stability assessment using tactile sensing , 2011, 2011 IEEE International Conference on Robotics and Automation.

[40]  Aaron M. Dollar,et al.  On dexterity and dexterous manipulation , 2011, 2011 15th International Conference on Advanced Robotics (ICAR).

[41]  Alin Albu-Schäffer,et al.  Towards the Robotic Co-Worker , 2009, ISRR.

[42]  Christopher David Cook,et al.  Sensorless Force Estimation for Robots with Friction , 2002 .

[43]  Ganwen Zeng,et al.  An overview of robot force control , 1997, Robotica.