Applications of modelling to optimise ultra high temperature milk heat exchangers with respect to fouling

Abstract A model for indirect thermal treatment of milk was implemented and applied to three commercial heat exchanger systems: two systems using tubular heat exchangers, albeit very different ones, and a plate type heat exchanger system. The model emphasis was placed on fouling prediction and bacterial inactivation, but other heat induced reactions were also included. The model was able to reproduce the time–temperature profiles satisfactory in all three cases. Some optimisation strategies with respect to fouling minimisation were simulated. For all cases, it was not possible to obtain major improvements using only the available degrees of freedom. However, the model predictions indicate that significant reductions in fouling are possible when applying minor redesigning to the systems. Especially the location of a preholding section proves to be of major importance.

[1]  Georges Corrieu,et al.  Fouling of a plate heat exchanger used in ultra-high-temperature sterilization of milk , 1984, Journal of Dairy Research.

[2]  Michael C. Georgiadis,et al.  Modeling and simulation of shell and tube heat exchangers under milk fouling , 1998 .

[3]  J. C. Leuliet,et al.  A reaction engineering approach to the analysis of fouling by whey proteins of a six-channels-per-pass plate heat exchanger , 1997 .

[4]  H. Burton.  Ultra-High-Temperature Processing of Milk and Milk Products , 1989 .

[5]  S. Roefs,et al.  A model for the denaturation and aggregation of beta-lactoglobulin. , 1994, European journal of biochemistry.

[6]  P. De Jong,et al.  Modelling and optimization of thermal processes in the dairy industry , 1996 .

[7]  William H. Press,et al.  The Art of Scientific Computing Second Edition , 1998 .

[8]  Michael C. Georgiadis,et al.  Dynamic modelling and simulation of plate heat exchangers under milk fouling , 2000 .

[9]  C. Peri,et al.  A study on optimizing heat treatment of milk. 1. Pasteurization , 1988 .

[10]  Peter de Jong,et al.  Reduction of fouling and contamination by predictive kinetic models , 2002 .

[11]  P. Jong,et al.  Performance of a steam-infusion plant for heating milk , 1994 .

[12]  Dean Vucinic,et al.  Application of computational fluid dynamics to model the hydrodynamics of plate heat exchangers for milk processing , 2003 .

[13]  Peter J. Fryer,et al.  Preliminary stages of fouling from whey protein solutions , 1993, Journal of Dairy Research.

[14]  R. Moermans,et al.  Identification and detection of Bacillus sporothermodurans spores in 1, 10, and 100 milliliters of raw milk by PCR , 1997, Applied and environmental microbiology.

[15]  William R. Paterson,et al.  A reaction engineering approach to the analysis of fouling , 1988 .

[16]  P. Walstra,et al.  Mechanisms of fouling in dairy processing. , 1996 .

[17]  R. K. Singh,et al.  Energy increases in operation and cleaning due to heat-exchanger fouling in milk pasteurization , 1991 .

[18]  P. De Jong,et al.  Impact and control of fouling in milk processing , 1997 .

[19]  T. R. Bott.  Fouling of Heat Exchangers , 1995 .

[20]  C. L. Foster,et al.  A model heat exchange apparatus for the investigation of fouling of stainless steel surfaces by milk II. Deposition of fouling material at 140 °C, its adhesion and depth profiling , 1990, Journal of Dairy Research.

[21]  S. Flint,et al.  The growth of Bacillus stearothermophilus on stainless steel , 2001, Journal of applied microbiology.

[22]  Michael C. Georgiadis,et al.  Optimal design and operation of heat exchangers under milk fouling , 1998 .

[23]  T. Jeurnink,et al.  Deposition of heated whey proteins on a chromium oxide surface. , 1996 .

[24]  T. Jeurnink,et al.  Milk fouling in heat exchangers , 1996 .

[25]  Pieter Walstra,et al.  Dairy Technology: Principles of Milk Properties and Processes , 1999 .