Splashing on elastic membranes: The importance of early-time dynamics

We study systematically the effect of substrate compliance on the threshold for splashing of a liquid drop using an elastic membrane under variable tension. We find that the splashing behavior is strongly affected by the tension in the membrane and splashing can be suppressed by reducing this tension. The deflection of the membrane upon droplet impact is measured using a laser sheet, and the results allow us to estimate the energy absorbed by the film upon drop impact. Measurements of the velocity and acceleration of the spreading drop after impact indicate that the splashing behavior is set at very early times after, or possibly just before, impact, far before the actual splash occurs. We also provide a model for the tension dependence of the splashing threshold based on the pressure in the drop upon impact that takes into account the interplay between membrane tension and drop parameters.

[1]  C. Tropea,et al.  Droplet-wall collisions: Experimental studies of the deformation and breakup process , 1995 .

[2]  Honghi Tran,et al.  Spread and rebound of liquid droplets upon impact on flat surfaces , 1997 .

[3]  Lei Xu.  Liquid drop splashing on smooth, rough, and textured surfaces. , 2007, Physical review. E, Statistical, nonlinear, and soft matter physics.

[4]  C. Avedisian,et al.  On the collision of a droplet with a solid surface , 1991, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[5]  M. Marengo,et al.  The impact of a single drop on a wetted solid surface , 1997 .

[6]  S. Storp,et al.  Mechanisms controlling leaf retention of agricultural spray solutions , 1991 .

[7]  C. Clanet,et al.  Making a splash with water repellency , 2007, cond-mat/0701093.

[8]  R. F. Allen,et al.  The role of surface tension in splashing , 1975 .

[9]  C. Tropea,et al.  Normal impact of a liquid drop on a dry surface: model for spreading and receding , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[10]  Manolis Gavaises,et al.  Modeling wall impaction of diesel sprays , 1996 .

[11]  H. Stone,et al.  Impact dynamics for elastic membranes. , 2006, Physical review letters.

[12]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[13]  A. Yarin.  Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing ... , 2006 .

[14]  F. Feuillebois,et al.  Influence of Surface Roughness on Liquid Drop Impact , 1998 .

[15]  Daniel Bonn,et al.  Controlling droplet deposition with polymer additives , 2000, Nature.

[16]  S. Thoroddsen,et al.  Evolution of the fingering pattern of an impacting drop , 1998 .

[17]  Jack Louis Zable,et al.  Splatter during ink jet printing , 1977 .

[18]  M. Pasandideh-Fard,et al.  Capillary effects during droplet impact on a solid surface , 1996 .

[19]  A. Yarin,et al.  Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity , 1995, Journal of Fluid Mechanics.

[20]  C. Tropea,et al.  Spray impact: Rim transverse instability initiating fingering and splash, and description of a secondary spray , 2006 .

[21]  Andrew Clarke,et al.  An energy balance approach of the dynamics of drop impact on a solid surface , 2008 .

[22]  H. Stone,et al.  Splash and anti-splash: observation and design. , 2006, Chaos.

[23]  D. B. Dam,et al.  Experimental study of the impact of an ink-jet printed droplet on a solid substrate , 2004 .

[24]  John E. Field,et al.  The effects of target compliance on liquid drop impact , 1989 .

[25]  C. Stow,et al.  An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface , 1981, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[26]  D. Kwok,et al.  On the maximum spreading diameter of impacting droplets on well-prepared solid surfaces. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[27]  S. Sampath,et al.  Splat formation and microstructure development during plasma spraying: deposition temperature effects , 2001 .

[28]  Chung King Law,et al.  Regimes of coalescence and separation in droplet collision , 1997, Journal of Fluid Mechanics.

[29]  Z. C. Feng,et al.  Instability of a liquid jet emerging from a droplet upon collision with a solid surface , 2000 .

[30]  E. Villermaux,et al.  Short-term dynamics of a density interface following an impact , 2007, Journal of Fluid Mechanics.

[31]  S. Nagel,et al.  Drop splashing on a dry smooth surface. , 2005, Physical review letters.