Improved vector control for stand-alone brushless doubly-fed induction generator

The brushless doubly-fed induction generator (BDFIG) shows commercial potential for the wind-power generation and ship shaft power generation due to its brushless operation as compared with doubly-fed induction generator. This paper proposes an improved vector control scheme oriented on the power winding flux reference frame to achieve stable stand-alone operation. To improve the dynamic performance of the load disturbance, the feed-forward compensation from the power winding (PW) current is also introduced. Simulation results on steady state and transient state have been carried out to verify the control scheme.

[1]  E. Oyarbide,et al.  Stability Analysis of a Brushless Doubly-Fed Machine under Closed Loop Scalar Current Control , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[2]  D. Roye,et al.  Stability analysis of a BDFM under open-loop voltage control , 2005, 2005 European Conference on Power Electronics and Applications.

[3]  Javier Poza,et al.  Vector control design and experimental evaluation for the brushless doubly fed machine , 2009 .

[4]  Frede Blaabjerg,et al.  Sensorless direct voltage control of the stand-alone brushless doubly-fed generator , 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

[5]  Xin Wang,et al.  Indirect Stator-Quantities Control for the Brushless Doubly Fed Induction Machine , 2014, IEEE Transactions on Power Electronics.

[6]  Frede Blaabjerg,et al.  An Improved Flux Observer for Field-Oriented Control of Induction Motors Based on Dual Second-Order Generalized Integrator Frequency-Locked Loop , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[7]  Javier Poza,et al.  Unified reference frame dq model of the brushless doubly fed machine , 2006 .

[8]  Shiyi Shao,et al.  Stator-Flux-Oriented Vector Control for Brushless Doubly Fed Induction Generator , 2009, IEEE Transactions on Industrial Electronics.

[9]  Xuefan Wang,et al.  Design of a Low-Harmonic-Content Wound Rotor for the Brushless Doubly Fed Generator , 2014, IEEE Transactions on Energy Conversion.

[10]  Wei Xu,et al.  Performance Analysis of a Stand-alone Brushless Doubly-fed Induction Generator Using a New T-type Steady-state Model , 2017 .

[11]  Wei Wang,et al.  Comparison of control strategies for a novel dual-stator brushless doubly-fed induction generator in wind energy applications , 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

[12]  Shiyi Shao,et al.  A new vector control scheme for the Brushless Doubly Fed Induction machine in shaft generation , 2015, 2015 IEEE Conference on Energy Conversion (CENCON).

[13]  X. Wang,et al.  Studies of inverter ratings of BDFM adjustable speed drive or generator systems , 2005, 2005 International Conference on Power Electronics and Drives Systems.

[14]  Xuefan Wang,et al.  Design and performance analysis of a brushless doubly-fed machine for stand-alone ship shaft generator systems , 2011, 2011 International Conference on Electrical and Control Engineering.

[15]  Yu Zhang,et al.  Control winding current-oriented control for stand-alone brushless doubly fed power generation system , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[16]  Y. Liu,et al.  Operation control of the brushless doubly-fed machine for stand-alone ship shaft generator systems , 2015, 2015 IEEE International Conference on Industrial Technology (ICIT).

[17]  Wu Ai,et al.  Control design and experimental verification of the brushless doubly-fed machine for stand-alone power generation applications , 2016 .