Numerical analysis of flow and combustion behavior in tuyere and raceway of blast furnace fueled with pulverized coal and recycled top gas

The simultaneous injection of pulverized coal (PC) and CO2-stripped blast furnace top gas (BFG) into the raceway of a blast furnace is an effective means of reducing carbon dioxide emissions in the ironmaking process. The BFG can be used as the cooling gas flowing through the annulus of coaxial lance. To stabilize the operation in the lower zone of blast furnace, the combustion characteristics of PC with/without BFG cooling gas within the blowpipe-tuyere-raceway region of a blast furnace are numerically investigated. The simulations focus on the effects of the lance configuration, the cooling gas type, and the cooling gas flow rate. The results show that a significant flow-induced pressure drop occurs at the blowpipe and tuyere part because of the gaseous combustion of the oxygen within the blast and the BFG injected via the lance. Moreover, the burnout of injected coal is significantly decreased with an increasing BFG cooling flow rates due to the additional oxygen consumption by the BFG. Finally, it is shown that a stronger swirling flow was formed when the lance configuration with bigger diameter was employed. Overall, the current numerical results provide a useful basis for improving the blast furnace performance in the future.

[1]  Yi Hua Han,et al.  Prospect Analysis on New Ironmaking Technology of Oxygen Blast Furnace and Gas-Recycle , 2010 .

[2]  Paul Zulli,et al.  A three-dimensional numerical study of the combustion of coal blends in blast furnace , 2009 .

[3]  Chenn Q. Zhou,et al.  Three-dimensional simulation of the pulverized coal combustion inside blast furnace tuyere , 2010 .

[4]  S. A. Morsi,et al.  An investigation of particle trajectories in two-phase flow systems , 1972, Journal of Fluid Mechanics.

[5]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[6]  John Davison,et al.  Performance and costs of power plants with capture and storage of CO2 , 2007 .

[7]  S. Ergun.  Fluid flow through packed columns , 1952 .

[8]  Christoph Feilmayr,et al.  Governing Processes of Gas and Oil Injection into the Blast Furnace , 2006 .

[9]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[10]  Paul Zulli,et al.  Three-dimensional modelling of in-furnace coal/coke combustion in a blast furnace , 2011 .

[11]  M. Baum,et al.  Predicting the Combustion Behaviour of Coal Particles , 1971 .

[12]  Paul Zulli,et al.  Three-dimensional modelling of coal combustion in blast furnace , 2008 .

[13]  Wojciech Stanek,et al.  Forecasting of the energy effects of injecting plastic wastes into the blast furnace in comparison with other auxiliary fuels , 2001 .

[14]  Michitaka Sato,et al.  Reduction of CO2 Emissions from Integrated Steel Works and Its Subjects for a Future Study , 2005 .

[15]  Paul Zulli,et al.  Model study of the effects of coal properties and blast conditions on pulverized coal combustion , 2009 .

[16]  Paul Zulli,et al.  Computational Fluid Dynamics Study of Pulverized Coal Combustion in Blast Furnace Raceway , 2009 .

[17]  N. I. Perlov.  Technological approaches to energy saving in blast-furnace operations in the iron and steel industry of the U.S.S.R. , 1987 .

[18]  David B. Stickler,et al.  Rapid devolatilization of pulverized coal in hot combustion gases , 1977 .

[19]  John Lucas,et al.  Performances of pulverized coal injection in blowpipe and tuyere at various operational conditions , 2007 .

[20]  W. Ranz.  Evaporation from drops : Part II , 1952 .

[21]  M. Field,et al.  Rate of combustion of size-graded fractions of char from a low-rank coal between 1 200°K and 2 000°K , 1969 .

[22]  Wei Hsin Chen,et al.  Pulverized coal burnout in blast furnace simulated by a drop tube furnace , 2010 .

[23]  Shan-Wen Du,et al.  Numerical prediction and practical improvement of pulverized coal combustion in blast furnace , 2006 .

[24]  Wei-Hsin Chen,et al.  An evaluation on rice husks and pulverized coal blends using a drop tube furnace and a thermogravimetric analyzer for application to a blast furnace , 2009 .