Field Testing of All-Steel Buckling-Restrained Braces Applied to a Damaged Reinforced Concrete Building

AbstractThis paper reports the results of full-scale inelastic cyclic static tests of all-steel dismountable buckling restrained braces (BRBs) applied to an existing damaged reinforced concrete (RC) building. The two concepts set as the design targets for the prototype BRBs were to minimize interference with the functions and aesthetics of the existing building and to use an all-steel dismountable solution to allow for inspection of the yielding core after earthquakes. Two masonry infill panels (typical in RC buildings) were used to hide the braces and satisfy the first objective. Specially designed steel built-up shapes with bolted connections were used to satisfy the second objective. The design criteria and procedure adopted for the retrofitting design are first described, and a description of the BRB specimens and the experimental results follows.

[1]  Chung-Che Chou,et al.  Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces , 2010 .

[2]  Mahmoud R. Maheri,et al.  Experimental investigation and design of steel brace connection to RC frame , 2003 .

[3]  T. T. Soong,et al.  STRUCTURAL CONTROL: PAST, PRESENT, AND FUTURE , 1997 .

[4]  Keh-Chyuan Tsai,et al.  High‐mode buckling responses of buckling‐restrained brace core plates , 2014 .

[5]  B. Rafezy,et al.  Overall buckling behavior of all-steel buckling restrained braces , 2012 .

[6]  Gaetano Della Corte,et al.  Development of a Displacement-Based Design Method for Steel Dual Systems With Buckling-Restrained Braces and Moment-Resisting Frames , 2010 .

[7]  Robert Tremblay,et al.  Seismic testing and performance of buckling- restrained bracing systems , 2006 .

[8]  Peter Fajfar,et al.  A Nonlinear Analysis Method for Performance-Based Seismic Design , 2000 .

[9]  Robert Tremblay,et al.  Inelastic seismic response of steel bracing members , 2002 .

[10]  Keh-Chyuan Tsai,et al.  Pseudo‐dynamic test of a full‐scale CFT/BRB frame—Part II: Seismic performance of buckling‐restrained braces and connections , 2008 .

[11]  Federico M. Mazzolani,et al.  Experimental analysis of steel dissipative bracing systems for seismic upgrading , 2009 .

[12]  Qiang Xie,et al.  State of the art of buckling-restrained braces in Asia , 2005 .

[13]  Federico M. Mazzolani,et al.  Lateral-Loading Tests on a Real RC Building Including Masonry Infill Panels with and without FRP Strengthening , 2008 .

[14]  Peter Dusicka,et al.  Global Restraint in Ultra-Lightweight Buckling-Restrained Braces , 2013 .

[15]  Keh-Chyuan Tsai,et al.  Seismic design and test of gusset connections for buckling‐restrained braced frames , 2014 .

[16]  Francesco Genna,et al.  Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. II: Engineering Analytical Estimates , 2012 .