Sliding bearings for hydropower applications : novel materials, surface texture and EALs
暂无分享,去创建一个
[1] Sergei B. Glavatskikh,et al. Steady State Performance Characteristics of a Tilting Pad Thrust Bearing , 2001 .
[2] L. M. Rybakova,et al. Effect of the loading parameters on the structural state of material in friction in the regime of selective transfer , 1989 .
[3] R. G. Bill,et al. Paper VI(ii) On the flow perturbations and friction reduction introduced by surface dimples , 1987 .
[4] Waldemar Dmochowski,et al. The Effect of Lubricant Viscosity-Temperature Characteristics on the Performance of Plain Journal Bearings , 2005 .
[5] C. M. McC. Ettles,et al. Transient thermoelastic effects in fluid film bearings , 1982 .
[6] Shyam Bahadur,et al. The action of fillers in the modification of the tribological behavior of polymers , 1992 .
[7] J. Cohen,et al. Residual Stress: Measurement by Diffraction and Interpretation , 1987 .
[8] Klaus Friedrich,et al. Recent advances in polymer composites' tribology , 1995 .
[9] Sergei Glavatskih,et al. Assessment of polymer composites for hydrodynamic journal‐bearing applications , 2008 .
[10] Elisabet Kassfeldt,et al. Tribological studies on oscillating bronze bearings lubricated with environmentally adapted lubricants (EALs) , 2006 .
[11] W. Gregory Sawyer,et al. A low friction and ultra low wear rate PEEK/PTFE composite , 2006 .
[12] Sergei Glavatskih,et al. Hydrodynamic journal bearing performance using rapeseed base fluid lubricant , 2008 .
[13] W. W. Gardner. Performance Tests on Six-Inch Tilting Pad Thrust Bearings , 1975 .
[14] Michel Fillon,et al. Unique performance aspects of PTFE-Lined thrust bearings , 2005 .
[15] J. Tonnesen,et al. Some Experiments on the Steady State Characteristics of a Cylindrical Fluid-Film Bearing Considering Thermal Effects , 1981 .
[16] Sergei Glavatskih,et al. Oil-film thickness and temperature measurements in PTFE and babbitt faced tilting-pad thrust bearings , 2005 .
[17] Izhak Etsion,et al. Friction-Reducing Surface-Texturing in Reciprocating Automotive Components , 2001 .
[18] Władyslaw Czupryk. Frictional transfer of iron in oxidative wear conditions during lubricated sliding , 2000 .
[19] Klaus Friedrich,et al. Wear of polymer composites , 2002 .
[20] E. E. Swanson,et al. Survey of Experimental Data for Fixed Geometry Hydrodynamic Journal Bearings , 1997 .
[21] Sergei Glavatskih,et al. Further transient test results for a pivoted-pad thrust bearing , 2003 .
[22] Jan Ukonsaari,et al. Wear and friction of synthetic esters in a boundary lubricated journal bearing , 2003 .
[23] S. Glavatskih. A method of temperature monitoring in fluid film bearings , 2004 .
[24] Peter Hedström,et al. Tribological studies on an EAL lubricated bearing bronze - steel pair under reciprocating sliding conditions , 2008 .
[25] Sergei Glavatskih,et al. Influence of oil type on the performance characteristics of a two‐axial groove journal bearing , 2008 .
[26] P. B. Neal,et al. Temperature Distributions and Heat Transfer in Journal Bearings , 1992 .
[27] C. A. Mahieux,et al. Experimental Characterization of the Influence of Coating Materials on the Hydrodynamic Behavior of Thrust Bearings: A Comparison of Babbitt, PTFE, and PFA , 2005 .
[28] J. L. Sullivan,et al. Wear of aluminium bronze on steel under conditions of boundary lubrication , 1985 .
[29] V. N. Litvinov,et al. The mechanism of the initial stage of selective transfer during frictional contact , 1978 .
[30] H. A. Tripp,et al. Steady load eccentricity measurements in a two axial groove journal bearingc , 1991 .
[31] M. G. Norton,et al. X-Ray diffraction : a practical approach , 1998 .
[32] Sergei Glavatskih,et al. A FEM approach to simulation of tilting-pad thrust bearing assemblies , 2002 .
[33] R. B. Howarth,et al. Wear Characteristics of Plain Hydrodynamic Journal Bearings During Repeated Starting and Stopping , 1977 .
[34] Steven F. Wayne,et al. Wear of copper and copper alloys under repetitive impact sliding , 1981 .
[35] Sergei Glavatskih,et al. Evaluating thermal performance of a PTFE-faced tilting pad thrust bearing , 2002 .
[36] Jan Ukonsaari. Tribology of journal bearings under environmentally adapted lubrication with shaft oscillation , 2004 .
[37] Sergei B. Glavatskikh. Transient thermal effects in a pivoted pad thrust bearing , 2000 .
[38] E. E. Swanson,et al. An Examination and Comparison of the Maximum Film Temperature in a Journal Bearing for 13 Synthetic, Mineral, and Viscosity Index Enhanced Oils , 1992 .
[39] Bo Jacobson,et al. The Stribeck memorial lecture , 2003 .
[40] Yoshiro Iwai,et al. Wear properties of a glass fiber filled PTFE composite under oil lubrication , 2000 .
[41] Qunji Xue,et al. Friction and wear characteristics of metal sulfides and graphite-filled PTFE composites under dry and oil-lubricated conditions , 1999 .
[42] B. Kowalski,et al. Determination of specific heats of some edible oils and fats by differential scanning calorimetry , 1988 .
[43] Sergei Glavatskih,et al. Improved efficiency with the use of environmentally adapted lubricants , 2000 .
[44] B. Hamrock,et al. Fundamentals of Fluid Film Lubrication , 1994 .
[45] R. H. Boehringer,et al. Lubrication of hydroelectric turbine thrust bearings with a diester‐based synthetic lubricant , 1990 .
[46] Yuko Tsuya,et al. Static friction between clean copper single crystal surfaces , 1961 .
[47] B. Phuoc Huynh. Numerical Study of Slider Bearings With Limited Corrugation , 2005 .
[48] Michel Fillon,et al. Thermal behaviour and performance characteristics of a twin axial groove journal bearing as a function of applied load and oil supply temperature , 2006 .
[49] Sergei Glavatskih,et al. Hydrodynamic bearings with improved performance and reliability : Part I : Influence of pad surface material , 2003 .
[50] H. Heshmat,et al. Elapsed time for the decay of thermal transients in fluid film bearing assemblies , 1989 .
[51] Roland Larsson,et al. Two-Dimensional CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication , 2005 .
[52] N. K. Myshkin,et al. Friction transfer film formation in boundary lubrication , 2000 .
[53] N. New,et al. Performance Of Adipate Diester Synthetic Lubricants In The Hydrodynamic Regime. , 1983 .
[54] Steven R. Schmid,et al. Fundamentals of Machine Elements , 1999 .
[55] R T Knox,et al. The development of polytetrafluoroethylene-faced hydrodynamic thrust bearings for hydrogenerator use in the United Kingdom. , 1998 .
[56] F. P. Bowden,et al. The Friction and Lubrication of Solids , 1964 .
[57] Sergei Glavatskih,et al. Performance evaluation for aged environmentally adapted lubricants in bronze‐steel sliding contacts , 2008 .
[58] Sergei Glavatskih,et al. Laboratory research facility for testing hydrodynamic thrust bearings , 2002 .
[59] Elisabet Kassfeldt,et al. Tribological study of boundary lubricated TiN-bronze bearing under slow intermittent motion using an environmentally adapted synthetic ester , 2008 .