Six-axis nanopositioning device with precision magnetic levitation technology

In this paper, we present the design, control, and testing of a 6 degrees-of-freedom magnetically-levitated system with nanometer-precision positioning capability and several-hundred-micrometer travel range. This system levitates a triangular single-moving-part platen, and produces the six-axis motion with six single-axis linear actuators. One of the prominent advantages of this magnetic levitation (maglev) system is that there is no physical contact between the moving part and the stator, which eliminates friction, wear, backlash, and hysteresis. As compared to other traditional devices, the present system is very compact with the minimum number of actuators for six-axis motion generation. The maglev device presented herein shows the position resolution better than 5 nm with 2-nm rms position noise, and is capable of a velocity of 0.5 m/s and an acceleration of 30 m/s/sup 2/. The nominal power consumption is only 15 mW by each horizontal actuator, and 320 mW by each vertical actuator. The actuators are sized to be able to orient and position a maximum payload of 1 kg. The key application of this maglev device is the manipulation at nanoscale for microassemblies and manufacture of their parts. Other potential applications are stereolithography, vibration-free delicate instrumentation, and microscale rapid prototyping.

[1]  Ahmed El Hajjaji,et al.  Modeling and nonlinear control of magnetic levitation systems , 2001, IEEE Trans. Ind. Electron..

[2]  Tadahiro Ohmi,et al.  0.69 nm resolution ultrasonic motor for large stroke precision stage , 2001, Proceedings of the 2001 1st IEEE Conference on Nanotechnology. IEEE-NANO 2001 (Cat. No.01EX516).

[3]  Chia-Hsiang Menq,et al.  Ultra precision motion control of a multiple degrees of freedom magnetic suspension stage , 2002 .

[4]  Rajesh Rajamani,et al.  A novel dual-axis electrostatic microactuation system for micromanipulation , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Kok Kiong Tan,et al.  Micro-positioning of linear piezoelectric motors based on a learning nonlinear PID controller , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[6]  B. Zhang,et al.  Developing a linear piezomotor with nanometer resolution and high stiffness , 1997 .

[7]  Fumihito Arai,et al.  3D nanorobotic manipulation of nano-order objects inside SEM , 2000, MHS2000. Proceedings of 2000 International Symposium on Micromechatronics and Human Science (Cat. No.00TH8530).

[8]  Ulrich Rembold,et al.  An automated microrobot-based desktop station for micro assembly and handling of micro-objects , 1996, Proceedings 1996 IEEE Conference on Emerging Technologies and Factory Automation. ETFA '96.

[9]  David L. Trumper,et al.  The long-range scanning stage: a novel platform for scanned-probe microscopy , 2000 .

[10]  G. W. Crabtree,et al.  Nanoscale Science, Engineering and Technology Research Directions , 1999 .

[11]  Ralph L. Hollis,et al.  A six-degree-of-freedom magnetically levitated variable compliance fine-motion wrist: design, modeling, and control , 1991, IEEE Trans. Robotics Autom..

[12]  Won-jong Kim,et al.  High-precision planar magnetic levitation , 1997 .

[13]  S. Mori,et al.  Linear actuator with air bearing for highly precise tracking [HDD] , 2002, Digest of the Asia-Pacific Magnetic Recording Conference.

[14]  David L. Trumper,et al.  High-precision magnetic levitation stage for photolithography , 1998 .

[15]  Gerber,et al.  Atomic Force Microscope , 2020, Definitions.

[16]  Won-jong Kim,et al.  High-precision control of a maglev linear actuator with nanopositioning capability , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[17]  C. Gerber,et al.  Surface Studies by Scanning Tunneling Microscopy , 1982 .

[18]  Yoon Su Baek,et al.  Study on a novel contact-free planar system using direct drive DC coils and permanent magnets , 2002 .