An investigation on thermal runaway behaviour of a cylindrical lithium-ion battery under different states of charge based on thermal tests and a three-dimensional thermal runaway model

[1]  D. Ouyang,et al.  Fluoroethylene Carbonate As Co-Solvent For Li(Ni0.8mn0.1co0.1)O2 Lithium-Ion Cells With Enhanced High-Voltage and Safety Performance , 2022, SSRN Electronic Journal.

[2]  Q. Cai,et al.  A comprehensive numerical study on electrochemical-thermal models of a cylindrical lithium-ion battery during discharge process , 2022, Applied Energy.

[3]  Xuning Feng,et al.  Heating power and heating energy effect on the thermal runaway propagation characteristics of lithium-ion battery module: Experiments and modeling , 2022, Applied Energy.

[4]  Qingsheng Wang,et al.  Suppression Behavior of Water Mist Containing Compound Additives on Lithium-ion Batteries Fire , 2022, Process Safety and Environmental Protection.

[5]  Jinlong Bai,et al.  Inhibition of thermal runaway in lithium-ion batteries by fine water mist containing a low-conductivity compound additive , 2022, Journal of Cleaner Production.

[6]  Ping Ping,et al.  A coupled conjugate heat transfer and CFD model for the thermal runaway evolution and jet fire of 18650 lithium-ion battery under thermal abuse , 2022, eTransportation.

[7]  Q. Cai,et al.  A systematic investigation of internal physical and chemical changes of lithium-ion batteries during overcharge , 2022, Journal of Power Sources.

[8]  Haobo Zhou,et al.  Constructing hierarchical structure based on LDH anchored boron-doped g-C3N4 assembled with MnO2 nanosheets towards reducing toxicants generation and fire hazard of epoxy resin , 2022, Composites Part B: Engineering.

[9]  Xuning Feng,et al.  Thermal runaway modeling of large format high-nickel/silicon-graphite lithium-ion batteries based on reaction sequence and kinetics , 2022, Applied Energy.

[10]  Caiping Zhang,et al.  Thermal runaway modeling of LiNi0.6Mn0.2Co0.2O2/graphite batteries under different states of charge , 2022, Journal of Energy Storage.

[11]  Shouxiang Lu,et al.  Venting Composition and Rate of Large-Format Lini0.8co0.1mn0.1o2 Pouch Power Battery During Thermal Runaway , 2022, SSRN Electronic Journal.

[12]  Zhirong Wang,et al.  MOFs-derived self-sacrificing template strategy to double-shelled metal oxides nanocages as hierarchical interfacial catalyst for suppressing smoke and toxic gases releases of epoxy resin , 2021, Chemical Engineering Journal.

[13]  Jason K. Ostanek,et al.  Effect of Electrode Crosstalk on Heat Release in Lithium-ion Batteries under Thermal Abuse Scenarios , 2021, Energy Storage Materials.

[14]  F. Khan,et al.  Modeling of thermal runaway propagation of NMC battery packs after fast charging operation , 2021 .

[15]  Wang Zhirong,et al.  Effect of mechanical extrusion force on thermal runaway of lithium-ion batteries caused by flat heating , 2021 .

[16]  Fengwei Jiang,et al.  Characteristics of and factors influencing thermal runaway propagation in lithium-ion battery packs , 2021 .

[17]  K. Amine,et al.  Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries , 2021 .

[18]  Yuan Hu,et al.  Designing of multifunctional and flame retardant separator towards safer high-performance lithium-sulfur batteries , 2021, Nano Research.

[19]  S. Santhanagopalan,et al.  Modeling cell venting and gas-phase reactions in 18650 lithium ion batteries during thermal runaway , 2021 .

[20]  S. Al-Hallaj,et al.  Enhancing thermal safety in lithium-ion battery packs through parallel cell ‘current dumping’ mitigation , 2021 .

[21]  Qingsong Wang,et al.  Experimental and modeling analysis of jet flow and fire dynamics of 18650-type lithium-ion battery , 2021 .

[22]  Qingsong Wang,et al.  The critical characteristics and transition process of lithium-ion battery thermal runaway , 2020 .

[23]  Qingsong Wang,et al.  Numerical study on thermal characteristics comparison between charge and discharge process for lithium ion battery , 2020 .

[24]  Qingsong Wang,et al.  An investigation on expansion behavior of lithium ion battery based on the thermal-mechanical coupling model , 2020 .

[25]  Xuning Feng,et al.  Experimental study on thermal runaway propagation of lithium-ion battery modules with different parallel-series hybrid connections , 2020 .

[26]  J. Wen,et al.  An experimental study on thermal runaway characteristics of lithium-ion batteries with high specific energy and prediction of heat release rate , 2020 .

[27]  Zhirong Wang,et al.  Identification and characteristic analysis of powder ejected from a lithium ion battery during thermal runaway at elevated temperatures. , 2020, Journal of hazardous materials.

[28]  C. Tao,et al.  Cooling control effect of water mist on thermal runaway propagation in lithium ion battery modules , 2020 .

[29]  Jason K. Ostanek,et al.  Simulating onset and evolution of thermal runaway in Li-ion cells using a coupled thermal and venting model , 2020, Applied Energy.

[30]  Qingsong Wang,et al.  Thermal runaway hazards investigation on 18650 lithium-ion battery using extended volume accelerating rate calorimeter , 2020 .

[31]  Qingsong Wang,et al.  Self-heating reaction and thermal runaway criticality of the lithium ion battery , 2020 .

[32]  Xuning Feng,et al.  A comparative analysis on thermal runaway behavior of Li (NixCoyMnz) O2 battery with different nickel contents at cell and module level. , 2020, Journal of hazardous materials.

[33]  T. Habetler,et al.  Hazard analysis of thermally abused lithium-ion batteries at different state of charges , 2020 .

[34]  Tetsuro Kobayashi,et al.  Model validation and simulation study on the thermal abuse behavior of LiNi0.8Co0.15Al0.05O2-based batteries , 2020 .

[35]  Zhirong Wang,et al.  Hazardous characteristics of charge and discharge of lithium-ion batteries under adiabatic environment and hot environment , 2019, International Journal of Heat and Mass Transfer.

[36]  Xuning Feng,et al.  Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database , 2019, Applied Energy.

[37]  Qingsong Wang,et al.  A review of lithium ion battery failure mechanisms and fire prevention strategies , 2019, Progress in Energy and Combustion Science.

[38]  Qingsong Wang,et al.  The effect of electrode design parameters on battery performance and optimization of electrode thickness based on the electrochemical–thermal coupling model , 2019, Sustainable Energy & Fuels.

[39]  Jianqiu Li,et al.  Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit , 2018, Joule.

[40]  Jianqiu Li,et al.  Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components , 2018, Applied Energy.

[41]  Xuning Feng,et al.  Thermal runaway mechanism of lithium ion battery for electric vehicles: A review , 2018 .

[42]  Hui Zhao,et al.  Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading , 2017 .

[43]  Jennifer X. Wen,et al.  Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions , 2017 .

[44]  Christian Veje,et al.  Numerical analysis of heat propagation in a battery pack using a novel technology for triggering thermal runaway , 2017 .

[45]  Takao Inoue,et al.  Roles of positive or negative electrodes in the thermal runaway of lithium-ion batteries: Accelerating rate calorimetry analyses with an all-inclusive microcell , 2017 .

[46]  Takao Inoue,et al.  Are All-Solid-State Lithium-Ion Batteries Really Safe?-Verification by Differential Scanning Calorimetry with an All-Inclusive Microcell. , 2017, ACS applied materials & interfaces.

[47]  Yanbao Ma,et al.  Prevent thermal runaway of lithium-ion batteries with minichannel cooling , 2017 .

[48]  Fangming Jiang,et al.  Thermal safety of lithium-ion batteries with various cathode materials: A numerical study , 2016 .

[49]  Minggao Ouyang,et al.  A 3D thermal runaway propagation model for a large format lithium ion battery module , 2016 .

[50]  M. Armand,et al.  Graphite electrode thermal behavior and solid electrolyte interphase investigations: Role of state-of-the-art binders, carbonate additives and lithium bis(fluorosulfonyl)imide salt , 2016 .

[51]  Jie Liu,et al.  Simulation and experimental study on lithium ion battery short circuit , 2016 .

[52]  Peng Wu,et al.  Thermal runaway propagation model for designing a safer battery pack with 25Ah LiNixCoyMnzO2 large format lithium ion battery , 2015 .

[53]  Xuning Feng,et al.  Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module , 2015 .

[54]  Yongqi Li,et al.  A Thermal Runaway Simulation on a Lithium Titanate Battery and the Battery Module , 2015 .

[55]  Heping Zhang,et al.  An experimental study on burning behaviors of 18650 lithium ion batteries using a cone calorimeter , 2015 .

[56]  Xiqian Yu,et al.  Structural changes and thermal stability of charged LiNixMnyCozO₂ cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy. , 2014, ACS applied materials & interfaces.

[57]  Jinhua Sun,et al.  Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method , 2014 .

[58]  Viktor Hacker,et al.  Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes , 2014 .

[59]  Lili Lu,et al.  A simulation on safety of LiFePO4/C cell using electrochemical–thermal coupling model , 2013 .

[60]  Chong Seung Yoon,et al.  Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries , 2013 .

[61]  Guy Marlair,et al.  In-depth safety-focused analysis of solvents used in electrolytes for large scale lithium ion batteries. , 2013, Physical chemistry chemical physics : PCCP.

[62]  Kristina Edström,et al.  Comparing anode and cathode electrode/electrolyte interface composition and morphology using soft and hard X-ray photoelectron spectroscopy , 2013 .

[63]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[64]  Qingsong Wang,et al.  Effects of solvents and salt on the thermal stability of charged LiCoO2 , 2009 .

[65]  Gi‐Heon Kim,et al.  A three-dimensional thermal abuse model for lithium-ion cells , 2007 .

[66]  Qingsong Wang,et al.  Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries , 2006 .

[67]  Qingsong Wang,et al.  Thermal stability of LiPF6/EC + DEC electrolyte with charged electrodes for lithium ion batteries , 2005 .

[68]  R. Spotnitz,et al.  Abuse behavior of high-power, lithium-ion cells , 2003 .

[69]  Un Ho Jung,et al.  Effect of Li2CO3 additive on gas generation in lithium-ion batteries , 2002 .

[70]  J. Yamaki,et al.  Thermal stability of graphite anode with electrolyte in lithium-ion cells , 2002 .

[71]  J. Dahn,et al.  Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells , 2001 .

[72]  H. Maleki,et al.  Thermal Stability Studies of Li‐Ion Cells and Components , 1999 .

[73]  V. M. Gorbachev.  Some aspects of Šestak's generalized kinetic equation in thermal analysis , 1980 .