Diamond-like carbon thin films prepared by pulsed-DC PE-CVD for biomedical applications

[1]  C. Muthamizhchelvan,et al.  In Vitro Corrosion Behaviour of Ti–6Al–4V and 316L Stainless Steel Alloys for Biomedical Implant Applications , 2018, Journal of Bio- and Tribo-Corrosion.

[2]  M. Ganjali,et al.  A Novel Electroactive Agarose-Aniline Pentamer Platform as a Potential Candidate for Neural Tissue Engineering , 2017, Scientific Reports.

[3]  S. Khamseh,et al.  High-performance hybrid coatings based on diamond-like carbon and copper for carbon steel protection , 2017 .

[4]  D. Divakar,et al.  In vitro assessment of stainless steel orthodontic brackets coated with titanium oxide mixed Ag for anti-adherent and antibacterial properties against Streptococcus mutans and Porphyromonas gingivalis. , 2017, Microbial pathogenesis.

[5]  A. Zamanian,et al.  Antibacterial glass-ionomer cement restorative materials: A critical review on the current status of extended release formulations. , 2017, Journal of controlled release : official journal of the Controlled Release Society.

[6]  C. Sukotjo,et al.  Ultrananocrystalline diamond coatings for the dental implant: Electrochemical nature , 2017 .

[7]  I. O. Wallinder,et al.  Antibacterial silver nanocluster/silica composite coatings on stainless steel , 2017 .

[8]  M. Mozafari,et al.  Improved electrochemical performance of nitrocarburised stainless steel by hydrogenated amorphous carbon thin films for bone tissue engineering , 2017 .

[9]  K. Zhou,et al.  Influence of Third Particle on the Tribological Behaviors of Diamond-like Carbon Films , 2016, Scientific Reports.

[10]  N. Huang,et al.  Biological responses of diamond-like carbon (DLC) films with different structures in biomedical application. , 2016, Materials science & engineering. C, Materials for biological applications.

[11]  U. Maver,et al.  Novel chitosan/diclofenac coatings on medical grade stainless steel for hip replacement applications , 2016, Scientific Reports.

[12]  M. Ranjbar,et al.  Fabrication of DLC thin films with improved diamond-like carbon character by the application of external magnetic field , 2015 .

[13]  N. Huang,et al.  Wear and corrosion properties of diamond like carbon (DLC) coating on stainless steel, CoCrMo and Ti6Al4V substrates , 2015 .

[14]  L. Duta,et al.  The Role of Ambient Gas and Pressure on the Structuring of Hard Diamond-Like Carbon Films Synthesized by Pulsed Laser Deposition , 2015, Materials.

[15]  K. Komvopoulos,et al.  Friction properties of amorphous carbon ultrathin films deposited by filtered cathodic vacuum arc and radio-frequency sputtering , 2015 .

[16]  N. Huang,et al.  Effect of modulation periods on the microstructure and mechanical properties of DLC/TiC multilayer films deposited by filtered cathodic vacuum arc method , 2015 .

[17]  Shih-Hsien Chang,et al.  Investigation of the characteristics of DLC films on oxynitriding-treated ASP23 high speed steel by DC-pulsed PECVD process , 2015 .

[18]  B. Schmidt,et al.  The origin of conductivity in ion-irradiated diamond-like carbon – Phase transformation and atomic ordering , 2014 .

[19]  W. Ensinger,et al.  Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation and deposition , 2014 .

[20]  M. R. Soares,et al.  Hydrogenated amorphous carbon thin films deposited by plasma-assisted chemical vapor deposition enhanced by electrostatic confinement: structure, properties, and modeling , 2014 .

[21]  Sanket A. Deshmukh,et al.  Probing the evolution and morphology of hard carbon spheres , 2014 .

[22]  R. Hauert,et al.  An overview on diamond-like carbon coatings in medical applications , 2013 .

[23]  W. Dai,et al.  Influence of bias voltage on microstructure and properties of Al-containing diamond-like carbon films deposited by a hybrid ion beam system , 2013 .

[24]  Enric Bertran,et al.  Ion energy distributions in bipolar pulsed-dc discharges of methane measured at the biased cathode , 2011 .

[25]  Jose L. Endrino,et al.  Design and rapid prototyping of DLC coated fractal surfaces for tissue engineering applications , 2010 .

[26]  L. Martinu,et al.  Corrosion performance and mechanical stability of 316L/DLC coating system: Role of interlayers , 2010 .

[27]  S. Khamseh,et al.  Influence of total gas pressure on the microstructure and properties of CrAlN films deposited by a pulsed DC balanced magnetron sputtering system , 2010 .

[28]  J. Chen,et al.  Wettability and bloodcompatibility of a-C:N:H films deposited by PIII-D , 2010 .

[29]  B. Tay,et al.  Raman spectroscopy study of DLC films prepared by RF plasma and filtered cathodic arc , 2007 .

[30]  B. Mishra,et al.  Examination of the pulsing phenomena in pulsed-closed field unbalanced magnetron sputtering (P-CFUBMS) of Cr–Al–N thin films , 2007 .

[31]  S. Logothetidis,et al.  Surface kinetics and subplantation phenomena affecting the texture, morphology, stress, and growth evolution of titanium nitride films , 2004 .

[32]  Lars Hultman,et al.  Development of preferred orientation in polycrystalline TiN layers grown by ultrahigh vacuum reactive magnetron sputtering , 1995 .

[33]  J. Ager,et al.  Effect of intrinsic growth stress on the Raman spectra of vacuum‐arc‐deposited amorphous carbon films , 1995 .

[34]  J. Robertson.  The deposition mechanism of diamond-like a-C and a-C: H , 1994 .

[35]  John Robertson,et al.  Diamond-like carbon , 1994 .

[36]  H. Windischmann.  An intrinsic stress scaling law for polycrystalline thin films prepared by ion beam sputtering , 1987 .

[37]  Rupinder Singh,et al.  In-vitro studies of SS 316 L biomedical implants prepared by FDM, vapor smoothing and investment casting , 2018 .

[38]  R. Minikayev,et al.  Copper nitride layers synthesized by pulsed magnetron sputtering , 2018 .

[39]  K. Dehghani,et al.  Structure and tribological behavior of diamond-like carbon coatings deposited on the martensitic stainless steel: The influence of gas composition and temperature , 2018 .

[40]  A. Nanci,et al.  Chemical nanocavitation of surfaces to enhance the utility of stainless steel as a medical material. , 2018, Colloids and surfaces. B, Biointerfaces.

[41]  M. Fathi,et al.  The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainless steel human body implant , 2014 .