A regenerative chatter observer analysis for micro-milling

[1]  V. Kartik,et al.  Modeling of Dynamic Instability Via Segmented Cutting Coefficients and Chatter Onset Detection in High-Speed Micromilling of Ti6Al4V , 2017 .

[2]  Qiang Zhang,et al.  Dynamics design optimization and experimental validation of a miniaturized machine tool for micro-milling , 2013, Prod. Eng..

[3]  Malek Ghanes,et al.  Observer Design for Nonlinear Systems Under Unknown Time-Varying Delays , 2013, IEEE Transactions on Automatic Control.

[4]  Eckart Uhlmann,et al.  Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping , 2016 .

[5]  Saleh Shakeri,et al.  Application of linear and nonlinear vibration absorbers in micro-milling process in order to suppress regenerative chatter , 2017 .

[6]  Farid Al-Bender,et al.  Design of piezo-based AVC system for machine tool applications , 2013 .

[7]  Lijie Wang,et al.  Adaptive Fuzzy Control for Nonstrict-Feedback Systems With Input Saturation and Output Constraint , 2017, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[8]  Yusuf Altintas,et al.  Chatter Stability Model of Micro-Milling With Process Damping , 2013 .

[9]  Chee Peng Lim,et al.  Robust Optimal Motion Cueing Algorithm Based on the Linear Quadratic Regulator Method and a Genetic Algorithm , 2017, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[10]  V. Kartik,et al.  Stability modeling with dynamic run-out in high speed micromilling of Ti6Al4V , 2019, International Journal of Mechanical Sciences.

[11]  V. Kartik,et al.  Modeling dynamic stability in high-speed micromilling of Ti–6Al–4V via velocity and chip load dependent cutting coefficients , 2015 .

[12]  C. Steve Suh,et al.  Multi-dimensional time-frequency control of micro-milling instability , 2014 .