Delaminations induced by constrained transverse cracking in symmetric composite laminates

Abstract Transverse ply cracking and its induced delaminations at the φ/90° interfaces in [. . . /φi/φm/90n] s laminates are theoretically investigated. Three cracked and delaminated model laminates, one five-layer model (FLM) laminate [SL/φm/902n/φm/SR] T and two three-layer model (TLM) laminates I and II, [φm/902n/φm] T and [S′L/902n/S′R] T, are designed to examine constraining mechanisms of the constraining plies of the center 90°-ply group on transverse crack induced delaminations, where SL, SR, S′L and S′R are sublaminates [. . ./φi] T, [φi/. . .] T, [. . ./φi/φm] T and [φm/φi/. . .] T, respectively. A sublaminate-wise first-order shear laminate theory is used to analyze stress and strain fields in the three cracked and delaminated laminates loaded in tension. The extension stiffness reduction of the constrained 90°-plies and the strain energy release rate for a local delamination normalized by the square of the laminate strain are calculated as a function of delamination length and transverse crack spacing. The constraining effects of the immediate neighboring plies and the remote plies are identified by conducting comparisons between the three model laminates. It is seen for the examined laminates that the nearest neighboring ply group of the 90°-plies primarily affects the stiffness reduction and also the normalized strain energy release rate, whereas the influences of the remote constraining layers are negligible.

[1]  R. Nuismer,et al.  Constitutive Relations of a Cracked Composite Lamina , 1988 .

[2]  Satish A. Salpekar,et al.  Combined effect of matrix cracking and stress-free edge on delamination , 1991 .

[3]  H. Tang,et al.  Micromechanics characterization of sublaminate damage , 1990 .

[4]  J. Reddy,et al.  Stiffness Reduction in Composite Laminates due to Transverse Matrix Cracks , 1995 .

[5]  Z. Hashin.  Analysis of Orthogonally Cracked Laminates Under Tension , 1987 .

[6]  T. K. Obrien,et al.  Analysis of local delaminations and their influence on composite laminate behavior , 1985 .

[7]  J. E. Bailey,et al.  On multiple transverse cracking in glass fibre epoxy cross-ply laminates , 1978 .

[8]  George J. Dvorak,et al.  Progressive Transverse Cracking In Composite Laminates , 1988 .

[9]  Luo Xu.  Influence of Stacking Sequence on the Transverse Matrix Cracking in Continuous Fiber Crossply Laminates , 1995 .

[10]  Costas Soutis,et al.  Analysis of multiple matrix cracking in [±θm/90n]s composite laminates. Part 1: In-plane stiffness properties , 1992 .

[11]  John A. Nairn,et al.  The initiation and growth of delaminations induced by matrix microcracks in laminated composites , 1992 .

[12]  Costas Soutis,et al.  Analysis of multiple matrix cracking in [±θm/90n]s composite laminates. Part 2: Development of transverse ply cracks , 1992 .

[13]  Costas Soutis,et al.  Strain energy release rate associated with local delamination in cracked composite laminates , 1994 .

[14]  H. T. Hahn,et al.  A simplified analysis of transverse ply cracking in cross-ply laminates , 1988 .

[15]  Kenneth Reifsnider,et al.  Characterization and Analysis of Damage Mechanisms in Tension-Tension Fatigue of Graphite/Epoxy Laminates , 1984 .

[16]  Jinghong Fan,et al.  In-situ damage evolution and micro/macro transition for laminated composites , 1993 .

[17]  Erian A. Armanios,et al.  Fracture analysis of transverse crack-tip and free-edge delamination in laminated composites , 1991 .

[18]  Hisao Fukunaga,et al.  Probabilistic Failure Strength Analyses of Graphite/Epoxy Cross-Ply Laminates , 1984 .