Design and characterisation of the high‐current DC breaker driven by explosive

[1]  Kun Wang,et al.  Updates on fast discharge resistor system for comprehensive research facility for fusion technology , 2021 .

[2]  Shenmin Zhang,et al.  Insulation structure design and electric field simulation of 500 kV isolation energy supply transformer for HVDC breaker , 2021, High Voltage.

[3]  Zhao Yuan,et al.  Development and prospect of direct‐current circuit breaker in China , 2021, High Voltage.

[4]  Hua Li,et al.  Computational investigation on the explosively actuated switch utilized in quenching protection system , 2021 .

[5]  Yingsan Geng,et al.  Breakdown of shield gaps in vacuum interrupters , 2020, High Voltage.

[6]  Li Hua,et al.  Concept design of 100 kA hybrid DC breaker on China fusion engineering test reactor , 2020, Fusion Engineering and Design.

[7]  Kumars Rouzbehi,et al.  Controllable reactor based hybrid HVDC breaker , 2020, High Voltage.

[8]  I. Song,et al.  Upgraded KSTAR Toroidal Field Coil Quench Protection System , 2020, IEEE Transactions on Plasma Science.

[9]  C. Ji,et al.  Numerical investigation of the dynamic response of CWC structures subjected to underwater explosion loading , 2020 .

[10]  Peng Fu,et al.  Conceptual Design of Fast Discharge Resistor System for Large Superconducting Fusion Devices , 2019, IEEE Transactions on Applied Superconductivity.

[11]  Z. Song,et al.  Designing of cooling water system for a pyro-breaker utilized in superconductive fusion facility , 2019, Fusion Engineering and Design.

[12]  Zhiqiang Fan,et al.  Effect of the cenospheres size and internally lateral constraints on dynamic compressive behavior of fly ash cenospheres polyurethane syntactic foams , 2019, Composites Part B: Engineering.

[13]  Song Ge,et al.  Experimental and numerical investigation of the centrifugal model for underwater explosion shock wave and bubble pulsation , 2017 .

[14]  L. Savoldi,et al.  Analyses of Low- and High-Margin Quench Propagation in the European DEMO TF Coil Winding Pack , 2016, IEEE Transactions on Plasma Science.

[15]  F. Topin,et al.  Investigations About Quench Detection in the ITER TF Coil System , 2012, IEEE Transactions on Applied Superconductivity.

[16]  J. Duchateau,et al.  Thermal Behavior and Quench of the ITER TF System During a Fast Discharge and Possibility of a Secondary Quench Detection , 2012, IEEE Transactions on Applied Superconductivity.

[17]  E. Gaio,et al.  Final design of the Quench Protection Circuits for the JT-60SA superconducting magnets , 2012, 2011 IEEE/NPSS 24th Symposium on Fusion Engineering.

[18]  Jae-Myung Lee,et al.  Blast loaded plates , 2009 .

[19]  H. M. Jones,et al.  The influence of pressure and conductivity on the pulsed breakdown of water , 1994 .

[20]  Fu Peng,et al.  Development on Explosive Breaker System , 2005 .