Acoustic emission imaging of shear failure in large reinforced concrete structures

In this study acoustic emission (AE) techniques were employed to investigate the process of fracture formation in large, shear-critical, reinforced concrete beams and to gain improved insight into the mechanisms of shear failure. Large sensor arrays were specially designed to study various aspects of failure by observing the fracturing processes throughout the load history of the beams. Smaller, more concentrated sensor arrays revealed complex spatial and temporal fracture development at the slow quasi-static and spontaneous dynamic stages of propagation. When AE events are related to the micro-structure of concrete through computed tomography images and surface fracture measurements they show that coarse aggregates play important roles in shear fracture propagation in reinforced concrete.

[1]  K. Aki.  Characterization of barriers on an earthquake fault , 1979 .

[2]  M. W. Huggins,et al.  Kani on shear in reinforced concrete , 1979 .

[3]  S. Niiseki,et al.  Influence of aggregate size on fracture process zone of concrete detected with three dimensional acoustic emission technique , 1991 .

[4]  Surendra P. Shah,et al.  The influence of microcracking on the mechanical behavior of cement based materials , 1995 .

[5]  H. Mihashi,et al.  Correlation between characteristics of fracture process zone and tension-softening properties of concrete , 1996 .

[6]  C. Shield,et al.  Acoustic Emission Monitoring as a Nondestructive Testing Technique in Reinforced Concrete , 1997 .

[7]  S. Stanchits,et al.  Source analysis of acoustic emissions in Aue granite cores under symmetric and asymmetric compressive loads , 1998 .

[8]  M. Ohtsu,et al.  MOMENT TENSOR ANALYSIS OF ACOUSTIC EMISSION FOR CRACKING MECHANISMS IN CONCRETE , 1998 .

[9]  Masayasu Ohtsu,et al.  A proposed standard for evaluating structural integrity of reinforced concrete beams by acoustic emission , 1999 .

[10]  M. Ohnaka,et al.  Scaling of the shear rupture process from nucleation to dynamic propagation: Implications of geometric irregularity of the rupturing surfaces , 1999 .

[11]  Surendra P. Shah,et al.  Assessing Damage in Corroded Reinforced Concrete Using Acoustic Emission , 2000 .

[12]  S. Yuyama,et al.  Evaluation of fatigue damage in reinforced concrete slab by acoustic emission , 2001 .

[13]  Keru Wu,et al.  Study of the influence of aggregate size distribution on mechanical properties of concrete by acoustic emission technique , 2001 .

[14]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[15]  T. Shiotani.  Application of the AE Improved b-Value to Quantiative Evaluation of Fracture Process in Concrete-Materials , 2001 .

[16]  Masayasu Ohtsu,et al.  DAMAGE ASSESSMENT OF REINFORCED CONCRETE BEAMS QUALIFIED BY ACOUSTIC EMISSION , 2002 .

[17]  Michael Forde,et al.  Assessing Damage of Reinforced Concrete Beam using b -value Analysis of Acoustic Emission Signals , 2003 .

[18]  Christian U. Grosse,et al.  Signal-Based Acoustic Emission Techniques in Civil Engineering , 2003 .

[19]  Bing Chen,et al.  EFFECT OF AGGREGATE ON THE FRACTURE BEHAVIOR OF HIGH STRENGTH CONCRETE , 2004 .

[20]  M. Ohnaka.  Rupture in the Laboratory , 2004, Science.

[21]  Michael Forde,et al.  AE energy analysis on concrete bridge beams , 2005 .

[22]  R. P. Young,et al.  Fracture in Westerly Granite under AE Feedback and Constant Strain Rate Loading: Nucleation, Quasi-static Propagation, and the Transition to Unstable Fracture Propagation , 2006 .

[23]  Mohammad Taghi Kazemi,et al.  Reinforced concrete beams without stirrups considering shear friction and fracture mechanics , 2006 .

[24]  E. Bentz,et al.  Effect of Aggregate Size on Beam-Shear Strength of Thick Slabs , 2007 .

[25]  Masayasu Ohtsu,et al.  Detection and evaluation of failures in high-strength tendon of prestressed concrete bridges by acoustic emission , 2007 .