Voltammetric Response of Alizarin Red S-Confined Film-Coated Electrodes to Diol and Polyol Compounds: Use of Phenylboronic Acid-Modified Poly(ethyleneimine) as Film Component

Alizarin red S (ARS) was confined in layer-by-layer (LbL) films composed of phenylboronic acid-modified poly(ethyleneimine) (PBA-PEI) and carboxymethylcellulose (CMC) to study the voltammetric response to diol and polyol compounds. The LbL film-coated gold (Au) electrode and quartz slide were immersed in an ARS solution to uptake ARS into the film. UV-visible absorption spectra of ARS-confined LbL film suggested that ARS formed boronate ester (ARS-PBS) in the film. The cyclic voltammetry of the ARS-confined LbL film-coated electrodes exhibited oxidation peaks at −0.50 and −0.62 V, which were ascribed to the oxidation reactions of ARS-PBS and free ARS, respectively, in the LbL film. The peak current at −0.62 V increased upon the addition of diol or polyol compounds such as L-dopa, glucose, and sorbitol into the solution, depending on the concentration, whereas the peak current at −0.50 V decreased. The results suggest a possible use of ARS-confined PBA-PEI/CMC LbL film-coated Au electrodes for the construction of voltammetric sensors for diol and polyol compounds.

[1]  F. Marken,et al.  Assembly of N-hexadecyl-pyridinium-4-boronic acid hexafluorophosphate monolayer films with catechol , 2010 .

[2]  N. Godman,et al.  Electrochemical Characterization of Layer-By-Layer Assembled Ferrocene-Modified Linear Poly(ethylenimine)/Enzyme Bioanodes for Glucose Sensor and Biofuel Cell Applications. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[3]  Qiang Chen,et al.  Multi-walled carbon nanotubes-based glucose biosensor prepared by a layer-by-layer technique , 2006 .

[4]  J. Anzai,et al.  Recent progress in electrochemical biosensors based on phenylboronic acid and derivatives. , 2016, Materials science & engineering. C, Materials for biological applications.

[5]  Gero Decher,et al.  Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites , 1997 .

[6]  Binghe Wang,et al.  A detailed examination of boronic acid–diol complexation , 2002 .

[7]  B. Tugba Camic,et al.  Fabrication of a transparent conducting electrode based on graphene/silver nanowires via layer-by-layer method for organic photovoltaic devices. , 2017, Journal of colloid and interface science.

[8]  G. Malucelli.  Surface-Engineered Fire Protective Coatings for Fabrics through Sol-Gel and Layer-by-Layer Methods: An Overview , 2016 .

[9]  F. Marken,et al.  Coil-by-coil assembly of poly[acrylamide-co-3-(methacryl-amido)-phenylboronic acid] with polydiallyldimethyl-ammonium to give alizarin red S responsive films , 2012 .

[10]  D. M. Lynn,et al.  Degradable Amine-Reactive Coatings Fabricated by the Covalent Layer-by-Layer Assembly of Poly(2-vinyl-4,4-dimethylazlactone) with Degradable Polyamine Building Blocks. , 2016, Biomacromolecules.

[11]  Qiang Chen,et al.  Amperometric choline biosensors prepared by layer-by-layer deposition of choline oxidase on the Prussian blue-modified platinum electrode. , 2006, Talanta.

[12]  F. Marken,et al.  Pyrene-anchored boronic acid receptors on carbon nanoparticle supports: fluxionality and pore effects , 2013 .

[13]  Kentaro Yoshida,et al.  pH- and sugar-sensitive multilayer films composed of phenylboronic acid (PBA)-modified poly(allylamine hydrochloride) (PBA-PAH) and poly(vinyl alcohol) (PVA): A significant effect of PBA content on the film stability. , 2016, Materials science & engineering. C, Materials for biological applications.

[14]  Thomas Boudou,et al.  Polysaccharide-based polyelectrolyte multilayers , 2010 .

[15]  M. Bonizzoni,et al.  Boronic acid-modified poly(amidoamine) dendrimers as sugar-sensing materials in water. , 2016, Journal of materials chemistry. B.

[16]  G. Springsteen,et al.  Alizarin Red S. as a general optical reporter for studying the binding of boronic acids with carbohydrates. , 2001, Chemical communications.

[17]  G. Shi,et al.  A novel electrochemical sensor based on boronic acid-functionalized multi-walled carbon nanotubes for astragaloside IV determination using ARS as the current indicator , 2012 .

[18]  Shigehiro Takahashi,et al.  Alizarin Red S-Confined Layer-By-Layer Films as Redox-Active Coatings on Electrodes for the Voltammetric Determination of L-Dopa , 2017, Materials.

[19]  D. Takahashi,et al.  Design, synthesis and evaluation of a boronic acid based artificial receptor for (L)-DOPA in aqueous media. , 2013, Chemical communications.

[20]  F. Caruso,et al.  Engineered hydrogen-bonded polymer multilayers: from assembly to biomedical applications. , 2011, Chemical Society reviews.

[21]  J. Anzai,et al.  Construction of positively-charged layered assemblies assisted by cyclodextrin complexation. , 2002, Chemical Communications.

[22]  Shigehiro Takahashi,et al.  Layer-by-layer Thin Films and Microcapsules for Biosensors and Controlled Release , 2012, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[23]  Frieder W. Scheller,et al.  Alizarin Red S as an electrochemical indicator for saccharide recognition , 2011 .

[24]  Helmuth Möhwald,et al.  Assembly, structural characterization, and thermal behavior of layer-by-layer deposited ultrathin films of poly(vinyl sulfate) and poly(allylamine) , 1993 .

[25]  Qiang Chen,et al.  Enzyme sensors prepared by layer-by-layer deposition of enzymes on a platinum electrode through avidin–biotin interaction , 1998 .

[26]  R. D. Oliveira,et al.  Interfacial characterization and supercapacitive properties of polyaniline − gum arabic nanocomposite/graphene oxide LbL modified electrodes , 2017 .