Comparison of seismic performance of three restrainers for multiple-span bridges using fragility analysis

Steel restrainer cables for multiple-frame bridges in California in the United States showed the effectiveness to prevent the unseating at the internal hinges during the past several earthquakes. After that, the steel restrainer cables are being tried to apply for multiple-span-simply-supported (MSSS) bridges in the central and the southeastern regions in the United States. In addition, shape memory alloy (SMA) bars in tension are being studied for the same application. In multiple-frame bridges, the developed seismic forces are transferred to piers through the restrainers; however, in MSSS bridges, the seismic forces are transferred to abutments by the restrainers. Therefore, the abutment’s behavior should be investigated as well. This study assesses the seismic performance of the three types of restrainers—steel restrainer cables, SMA bars in tension, and SMA bars in bending for MSSS bridges—due to moderate to strong ground motions using a deterministic seismic analysis. Also, a fragility analysis is conduced to assess the seismic resistance for the overall bridge system. For these analyses, the bending test of an SMA bar is conducted and its analytical model is determined. Then, nonlinear time history analyses are conducted to assess the seismic responses of the as-built and the retrofitted bridges. The deterministic analysis illustrates how the restrainers influence the components of the bridge. However, it could not explain the effects on the whole bridge system. The fragility analysis shows the effects of the three restrainers on the overall bridge system. The fragility analysis indicates that the SMA bars in bending are the most effective ones.

[1]  Gunther Eggeler,et al.  Structural fatigue of pseudoelastic NiTi shape memory wires , 2004 .

[2]  Reginald DesRoches,et al.  CYCLIC PROPERTIES OF SUPERELASTIC SHAPE MEMORY ALLOY WIRES AND BARS , 2004 .

[3]  Nien-Chien Tsai.  Spectrum-Compatible Motions for Design Purposes , 1972 .

[4]  Murat Dicleli,et al.  Supplemental elastic stiffness to reduce isolator displacements for seismic-isolated bridges in near-fault zones , 2007 .

[5]  Roberto T. Leon,et al.  Steel Beam-Column Connections using Shape Memory Alloys , 2004 .

[6]  A. Pelton,et al.  An overview of nitinol medical applications , 1999 .

[7]  Reginald DesRoches,et al.  Seismic retrofit of simply supported bridges using shape memory alloys , 2002 .

[8]  Y. K. Wen,et al.  Uniform Hazard Ground Motions for Mid-America Cities , 2001 .

[9]  Reginald DesRoches,et al.  Seismic fragility of typical bridges in moderate seismic zones , 2004 .

[10]  Brian Maroney,et al.  Experimental Testing of Laterally Loaded Large Scale Bridge Abutments , 1993 .

[11]  Reginald DesRoches,et al.  Large scale testing of nitinol shape memory alloy devices for retrofitting of bridges , 2008 .

[12]  Shuichi Miyazaki,et al.  Fatigue life of Ti–50 at.% Ni and Ti–40Ni–10Cu (at.%) shape memory alloy wires , 1999 .

[13]  Krzysztof Wilde,et al.  Base isolation system with shape memory alloy device for elevated highway bridges , 2000 .

[14]  Reginald DesRoches,et al.  Unseating prevention for multiple frame bridges using superelastic devices , 2005 .

[15]  Donatello Cardone,et al.  Implementation and testing of passive control devices based on shape memory alloys , 2000 .

[16]  Dong-Ho Choi,et al.  Multi-damping earthquake design spectra-compatible motion histories , 2003 .

[17]  Do Hyung Lee,et al.  Shape memory alloy bending bars as seismic restrainers for bridges in seismic areas , 2009 .

[18]  S. Emerson,et al.  AASHTO (American Association of State Highway and Transportation Officials). 2001. A Policy on Geometric Design of Highways and Streets. Fourth Edition. Washington, D.C. , 2007 .

[19]  Howard H. M. Hwang,et al.  Seismic Fragility Analysis of Highway Bridges , 2001 .

[20]  M. K. Kaul.  Spectrum-Consistent Time-History Generation , 1978 .

[21]  S. Unjoh,et al.  Development of a Shape Memory Alloy Damper for Intelligent Bridge Systems , 2000 .

[22]  J D Cooper,et al.  THE NORTHRIDGE EARTHQUAKE: PROGRESS MADE, LESSONS LEARNED IN SEISMIC-RESISTANT BRIDGE DESIGN , 1994 .

[23]  Hisaaki Tobushi,et al.  Fatigue Properties of TiNi Shape Memory Alloy , 2000 .