Transient analysis and simulation of a high power IGBT non-destructive tester

The study proposes the primary design and transient analysis of an IGBT non-destructive tester. The tester is designed to test IGBTs at voltage and current ratings less than 3.3kV 2.4kA. Due to stray elements, the circuit might oscillate during the different modes of operation and test conditions. These oscillations could cause high stresses to the IGBT switches in the circuit and cause one or more of the switches to fail. A transient analysis is performed taking into account the different operating conditions. Hence the potential for destructive oscillations can be minimized via the proper design of the IGBT gate resistors. Simulation results of a failure case study using spice simulation software are then presented.

[1]  1300 V, 2 ms pulse inductive load switching test circuit with 20 ns selectable crowbar intervention , 2009, Microelectron. Reliab..

[2]  Y. Wang,et al.  An analysis of high power IGBT switching under cascade active voltage control , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[3]  J.B. Bernstein,et al.  Failure dynamics of the IGBT during turn-off for unclamped inductive loading conditions , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[4]  C. Abbate,et al.  EMI Characterisation of high power IGBT modules for Traction Application , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[5]  Francesco Iannuzzo,et al.  Non-destructive high temperature characterisation of high-voltage IGBTs , 2002, Microelectron. Reliab..

[6]  D. Y. Chen,et al.  An 1800 V 300 A nondestructive tester for bipolar power transistors , 1990 .

[7]  Andrea Irace,et al.  A novel UIS test system with Crowbar feedback for reduced failure energy in power devices testing , 2010, Microelectron. Reliab..

[8]  C. Abbate,et al.  Non destructive SOA testing of power modules , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[9]  Patrick R. Palmer,et al.  Analysis of IGBT modules connected in series , 1998 .