Detecting failure precursors in BGA solder joints

A failure precursor is a measurable parameter which provides an indication of impending failure. By detecting changes in these precursors, deviation of the system from its healthy state can be detected early and unanticipated failures can be avoided. The case study illustrates the use of Multivariate State Estimation Technique (MSET) and Sequential Probability Ratio Test (SPRT) to detect the onset of failure in Ball Grid Arrays (BGA) subjected to Accelerated Temperature Cycling (ATC) tests. The residuals from MSET show a shift in their distribution as they degrade; SPRT detects the anomalous behavior (degradation) in the interconnects. The time to detection of anomalies was found to be earlier than the time to failure of the BGA interconnects, providing a prognostic distance. Hence the change in resistance of the BGA can be used as a precursor to failure.

[1]  M. Pecht,et al.  Prognostics and Health Monitoring of Electronics , 2006, 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems. EuroSime 2007.

[2]  Chiman Kwan,et al.  An Enhanced Prognostic Model for Intermittent Failures in Digital Electronics , 2007, 2007 IEEE Aerospace Conference.

[4]  P. Sandborn.  A decision support model for determining the applicability of prognostic health management (PHM) approaches to electronic systems , 2005, Annual Reliability and Maintainability Symposium, 2005. Proceedings..

[5]  K. Gross,et al.  Sensor fault detection in nuclear power plants using multivariate state estimation technique and support vector machines. , 2000 .

[6]  J. Andel.  Sequential Analysis , 2022, The SAGE Encyclopedia of Research Design.

[7]  Leon Lopez,et al.  Advanced electronic prognostics through system telemetry and pattern recognition methods , 2007, Microelectron. Reliab..

[8]  M.G. Pecht,et al.  Prognostics and health management of electronics , 2008, IEEE Transactions on Components and Packaging Technologies.

[9]  Kenny C. Gross,et al.  Proactive Fault Monitoring in Enterprise Servers , 2005, CDES.

[10]  Kenny C. Gross,et al.  Early Detection of Signal and Process Anomalies in Enterprise Computing Systems , 2002, ICMLA.