Effects of Rebar Size and Volume Fraction of Glass Fibers on Tensile Strength Retention of GFRP Rebars in Alkaline Environment via RSM and SHAP Analyses

[1]  Fazal E. Jalal,et al.  Investigating the Bond Strength of FRP Laminates with Concrete Using LIGHT GBM and SHAPASH Analysis , 2022, Polymers.

[2]  U. Isikdag,et al.  Explainable machine learning models for predicting the axial compression capacity of concrete filled steel tubular columns , 2022, Construction and Building Materials.

[3]  Fazal E. Jalal,et al.  Hybrid ANN models for durability of GFRP rebars in alkaline concrete environment using three swarm-based optimization algorithms , 2022, Construction and Building Materials.

[4]  C. Leung,et al.  Mechanical and long-term durability prediction of GFRP rebars with the adoption of low-pH CSA concrete , 2022, Construction and Building Materials.

[5]  Fazal E. Jalal,et al.  Prediction of rapid chloride penetration resistance of metakaolin based high strength concrete using light GBM and XGBoost models by incorporating SHAP analysis , 2022, Construction and Building Materials.

[6]  Lei Zhao,et al.  The effects of silanized rubber and nano-SiO2 on microstructure and frost resistance characteristics of concrete using response surface methodology (RSM) , 2022, Construction and Building Materials.

[7]  U. Rathnayake,et al.  A novel approach to explain the black-box nature of machine learning in compressive strength predictions of concrete using Shapley additive explanations (SHAP) , 2022, Case Studies in Construction Materials.

[8]  Zhishen Wu,et al.  Durability of Seawater Sea Sand Concrete Beams Reinforced with Carbon Nanotube-Modified BFRP Bars in a Marine Environment , 2022, Composite Structures.

[9]  Airong Chen,et al.  Auto-tuning ensemble models for estimating shear resistance of headed studs in concrete , 2022, Journal of Building Engineering.

[10]  Fazal E. Jalal,et al.  Prediction of residual tensile strength of glass fiber reinforced polymer bars in harsh alkaline concrete environment using fuzzy metaheuristic models , 2022, Journal of Ocean Engineering and Science.

[11]  S. Gourvenec,et al.  Global assessment of historical, current and forecast ocean energy infrastructure: Implications for marine space planning, sustainable design and end-of-engineered-life management , 2022, Renewable and Sustainable Energy Reviews.

[12]  Ademola Oyejide Adebayo,et al.  Performance evaluation of ANFIS and RSM modeling in predicting biogas and methane yields from Arachis hypogea shells pretreated with size reduction , 2022, Renewable Energy.

[13]  P. Samui,et al.  Soft Computing Approaches Towards Tensile Strength Estimation of GFRP Rebars Subjected to Alkaline-Concrete Environment , 2022, Case Studies in Construction Materials.

[14]  U. Ebead,et al.  A review of recent advances in the science and technology of seawater-mixed concrete , 2022, Cement and Concrete Research.

[15]  Yang Wei,et al.  Compressive performance of concrete-filled steel tube columns with in-built seawater and sea sand concrete-filled FRP tubes , 2022, Construction and Building Materials.

[16]  Fazal E. Jalal,et al.  Durability evaluation of GFRP rebars in harsh alkaline environment using optimized tree-based random forest model , 2021, Journal of Ocean Engineering and Science.

[17]  Niaz Muhammad Shahani,et al.  Application of Gradient Boosting Machine Learning Algorithms to Predict Uniaxial Compressive Strength of Soft Sedimentary Rocks at Thar Coalfield , 2021, Advances in Civil Engineering.

[18]  T. Tafsirojjaman,et al.  Environmental impact on the durability of FRP reinforcing bars , 2021 .

[19]  Panuwat Joyklad,et al.  Application of Advanced Machine Learning Approaches to Predict the Compressive Strength of Concrete Containing Supplementary Cementitious Materials , 2021, Materials.

[20]  Fazal E. Jalal,et al.  Evaluation of tensile strength degradation of GFRP rebars in harsh alkaline conditions using non-linear genetic-based models , 2021, Materials and Structures.

[21]  Muhammad Faisal Javed,et al.  Predicting the compaction characteristics of expansive soils using two genetic programming-based algorithms , 2021 .

[22]  A. Penlidis,et al.  Degradation of glass fiber reinforced polymer (GFRP) bars in concrete environment , 2021, Construction and Building Materials.

[23]  Fazal E. Jalal,et al.  Computational AI prediction models for residual tensile strength of GFRP bars aged in the alkaline concrete environment , 2021, Ocean Engineering.

[24]  D. Berman,et al.  Impact of train/test sample regimen on performance estimate stability of machine learning in cardiovascular imaging , 2021, Scientific Reports.

[25]  M. Napiah,et al.  Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology , 2021, Construction and Building Materials.

[26]  Guilin Huang,et al.  Missing data filling method based on linear interpolation and lightgbm , 2021, Journal of Physics: Conference Series.

[27]  Fujian Wang,et al.  Freeway Short-Term Travel Time Prediction Based on LightGBM Algorithm , 2021 .

[28]  Feiliang Wang,et al.  Prediction of Catenary Action Capacity of RC Beam-Column Substructures under a Missing Column Scenario Using Evolutionary Algorithm , 2021, KSCE Journal of Civil Engineering.

[29]  M. Napiah,et al.  Modeling and optimization of mixing conditions for petroleum sludge modified bitumen using response surface methodology , 2020 .

[30]  M. Napiah,et al.  Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology , 2020, International Journal of Pavement Engineering.

[31]  Jiancheng Qin,et al.  SwiftIDS: Real-time intrusion detection system based on LightGBM and parallel intrusion detection mechanism , 2020, Comput. Secur..

[32]  Deju Zhu,et al.  A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete , 2020 .

[33]  Seong-Hoon Hwang,et al.  Failure mode and effects analysis of RC members based on machine-learning-based SHapley Additive exPlanations (SHAP) approach , 2020 .

[34]  Tatsuro Yamane,et al.  Automatic detection method of cracks from concrete surface imagery using two‐step light gradient boosting machine , 2020, Comput. Aided Civ. Infrastructure Eng..

[35]  Wu Hao,et al.  Predicting Hard Rock Pillar Stability Using GBDT, XGBoost, and LightGBM Algorithms , 2020, Mathematics.

[36]  O. Starkova,et al.  Long-term moisture absorption and durability of FRP pultruded rebars , 2020 .

[37]  Ali Movahedi,et al.  Toward safer highways, application of XGBoost and SHAP for real-time accident detection and feature analysis. , 2019, Accident; analysis and prevention.

[38]  Cheng Chen,et al.  LightGBM-PPI: Predicting protein-protein interactions through LightGBM with multi-information fusion , 2019, Chemometrics and Intelligent Laboratory Systems.

[39]  Gabriela Mesnita,et al.  Light GBM Machine Learning Algorithm to Online Click Fraud Detection , 2019, Journal of Information Assurance & Cybersecurity.

[40]  Muhammad Zahid,et al.  Experimental Investigation and Statistical Modeling of FRP Confined RuC Using Response Surface Methodology , 2019, Civil Engineering Journal.

[41]  N. Shafiq,et al.  Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology , 2018, Journal of Cleaner Production.

[42]  Mohsen Rashki,et al.  Using Response Surface Methodology and providing a modified model using whale algorithm for estimating the compressive strength of columns confined with FRP sheets , 2018, Construction and Building Materials.

[43]  R. K. Singh Raman,et al.  Durability of fiber reinforced polymer (FRP) in simulated seawater sea sand concrete (SWSSC) environment , 2018, Corrosion Science.

[44]  Cristina Miàs Oller,et al.  Durability and degradation mechanisms of GFRP reinforcement subjected to severe environments and sustained stress , 2018 .

[45]  M. Nematzadeh,et al.  Optimizing compressive behavior of concrete containing fine recycled refractory brick aggregate together with calcium aluminate cement and polyvinyl alcohol fibers exposed to acidic environment , 2018 .

[46]  B. Benmokrane,et al.  Statistical analysis and theoretical predictions of the tensile-strength retention of glass fiber-reinforced polymer bars based on resin type , 2018 .

[47]  Ueli M. Angst,et al.  Challenges and opportunities in corrosion of steel in concrete , 2018, Materials and Structures.

[48]  Antonio Nanni,et al.  Use of sea-sand and seawater in concrete construction: Current status and future opportunities , 2017 .

[49]  Bitrus Emmanuel Achara,et al.  Properties of nano-silica-modified self-compacting engineered cementitious composites , 2017 .

[50]  K. E. Alyamaç,et al.  Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method , 2017 .

[51]  Eduardo Júlio,et al.  RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers , 2014 .

[52]  Javier Domínguez-Hernández,et al.  The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM , 2014 .

[53]  M. Johari,et al.  Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method , 2013 .

[54]  Tarek H. Almusallam,et al.  Effect of harsh environmental conditions on the tensile properties of GFRP bars , 2013 .

[55]  Jong-Pil Won,et al.  The effect of exposure to alkaline solution and water on the strength–porosity relationship of GFRP rebar , 2008 .

[56]  Young-Jun You,et al.  Short-term durability test for GFRP rods under various environmental conditions , 2008 .

[57]  Julio F. Davalos,et al.  Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures , 2007 .

[58]  Paul J. Hogg,et al.  Temperature and environmental effects on glass fibre rebar: modulus, strength and interfacial bond strength with concrete , 2005 .

[59]  Rashmi S. Upasani,et al.  Response Surface Methodology to Investigate the Iontophoretic Delivery of Tacrine Hydrochloride , 2004, Pharmaceutical Research.

[60]  Dong Wei,et al.  Building Cooling load prediction based on LightGBM , 2022, IFAC-PapersOnLine.

[61]  Mingxi Liu,et al.  A novel cryptocurrency price trend forecasting model based on LightGBM , 2020 .

[62]  Brahim Benmokrane,et al.  Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars , 2013 .