Over the past decade a trend of component miniaturization can be observed both in industry and in the laboratory, which involves an increasing demand for nanopositioning and nanomeasuring machines as well as for miniature tactile probes for measuring complex three-dimensional objects. The challenge is that these components—for example, diesel injectors, microgears and small optics—feature dimensions in the micrometre range with associated dimensional tolerances below 100 nm. For this reason, a significant number of research projects have dealt with microprobes for performing the dimensional measurements of microstructures with the goal of achieving measurement uncertainties in the nanometre range. This paper introduces an updated version of a 3D microprobe with an optical detection system developed at the Institute of Process Measurement and Sensor Technology. It consists of a measuring head and a separate probe system. The mechanical design of the probe system has been completely overhauled to enable the exchange of the stylus separately from the flexure elements. This is very important for the determination of the probing sphere's roundness deviations. The silicon membranes used in the first system design are therefore replaced by metal membranes. A new design of these membranes, optimized for isotropic probing forces and locking parasitic movements, is presented. Regarding the measuring head, the optical design has been redesigned to eliminate disruptive interference on the quadrant photodiode used for deflection measurement and to improve adjustment. Its dimensioning is discussed, especially the influence of the laser beam diameter on the interference contrast due to the parallel misalignment of the collimated laser beam. Initial measurement results are presented to prove functionality.
[1]
Andrew Lewis,et al.
Design for a compact high-accuracy CMM
,
1999
.
[2]
R. Thalmann,et al.
Ultraprecision micro-CMM using a low force 3D touch probe
,
2007
.
[3]
Tino Hausotte,et al.
New applications of the nanopositioning and nanomeasuring machine by using advanced tactile and non-tactile probes
,
2007
.
[4]
John R. Stoup,et al.
A fiber probe for CMM measurements of small features
,
2005,
SPIE Optics + Photonics.
[5]
G. Jäger,et al.
Investigation of the metrological properties of a 3-D microprobe with optical detection system
,
2010,
NanoScience + Engineering.
[6]
John A. Kramar,et al.
Nanometre resolution metrology with the Molecular Measuring Machine
,
2005
.
[8]
Tino Hausotte,et al.
Nanometrology – Nanopositioning- and Nanomeasuring Machine with Integrated Nanopobes
,
2006
.
[9]
Dong-Yea Sheu,et al.
Micro-spherical probes machining by EDM
,
2005
.
[10]
Dong-Yea Sheu,et al.
Study on an evaluation method of micro CMM spherical stylus tips by µ-EDM on-machine measurement
,
2010
.
[11]
Stephanus Büttgenbach,et al.
Analysis of full and cross-shaped boss membranes with piezoresistors in transversal strain configuration
,
2008
.
[12]
Richard K. Leach,et al.
A vibrating micro-scale CMM probe for measuring high aspect ratio structures
,
2010
.