Avoiding Shading Losses in Concentrator Photovoltaics Using a Soft-Imprinted Cloaking Geometry

Shading losses are a longstanding obstacle in photovoltaic devices, particularly in concentrator photovoltaics, where the tradeoff between shading and resistive losses limits the concentration at which the highest power conversion efficiency is achieved to values far below the capabilities of concentrator optics. Here, we demonstrate a simple and scalable fabrication method that enables large front metal coverage while keeping shading losses to a minimum. Soft-imprint lithography is used to create trenches in a transparent polymer above the metal contacts, enabling cloaking via refraction at a range of angles near normal incidence. Using optical characterization techniques, we first confirm that the metal contacts are indeed optically cloaked. We then demonstrate an increase in short-circuit current density from 29.95 to 39.12 mA/cm2 for a Si solar cell with 25% front metal coverage before and after patterning, respectively. We investigate the angular performance of the trench pattern and further demonstrate how such a cloaking strategy could be implemented in concentrator photovoltaics to enable efficiency peaks at concentrations beyond 1000 suns.

[1]  D. Bhattacharyya,et al.  Deployment Opportunities for Space Photovoltaics and the Prospects for Perovskite Solar Cells , 2021, Advanced Materials Technologies.

[2]  H. Wirth,et al.  Potential and Challenges of Vehicle Integrated Photovoltaics for Passenger Cars , 2020 .

[3]  H. Atwater,et al.  A Computationally Efficient Multidiode Model for Optimizing the Front Grid of Multijunction Solar Cells under Concentration , 2020 .

[4]  S. Boden,et al.  Wavelength and angle resolved reflectance measurements of pyramidal textures for crystalline silicon photovoltaics , 2020, Progress in Photovoltaics.

[5]  A. Polman,et al.  Resonant Metagratings for Spectral and Angular Control of Light for Colored Rooftop Photovoltaics , 2020 .

[6]  John F. Geisz,et al.  Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentration , 2020 .

[7]  S. Kaya,et al.  A review of polymethyl methacrylate (PMMA) as a versatile lithographic resist – With emphasis on UV exposure , 2020 .

[8]  S. Kalogirou,et al.  Status, barriers and perspectives of building integrated photovoltaic systems , 2020 .

[9]  M. Megens,et al.  Nanoscale spatial limitations of large-area substrate conformal imprint lithography , 2019, Nanotechnology.

[10]  H. Atwater,et al.  A computationally efficient simulation method for optimizing front contacts of concentrator multijunction solar cells , 2019, 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC).

[11]  John Aldersey-Williams,et al.  Levelised cost of energy – A theoretical justification and critical assessment , 2019, Energy Policy.

[12]  Daniel J. Friedman,et al.  Correction: Thermal energy grid storage using multi-junction photovoltaics , 2018, Energy & Environmental Science.

[13]  Martin F. Schumann,et al.  All‐Angle Invisibility Cloaking of Contact Fingers on Solar Cells by Refractive Free‐Form Surfaces , 2017 .

[14]  Steven Nagels,et al.  Organic and perovskite solar cells for space applications , 2017, Solar Energy Materials and Solar Cells.

[15]  Albert Polman,et al.  Efficient colored silicon solar modules using integrated resonant dielectric nanoscatterers , 2017 .

[16]  Zhengshan J. Yu,et al.  Silicon heterojunction solar cells with effectively transparent front contacts , 2017 .

[17]  Fu-Hao Chen,et al.  Increasing light capture in silicon solar cells with encapsulants incorporating air prisms to reduce metallic contact losses. , 2016, Optics express.

[18]  H. Atwater,et al.  Total Internal Reflection for Effectively Transparent Solar Cell Contacts , 2016, 1610.01047.

[19]  Colton R. Bukowsky,et al.  Effectively Transparent Front Contacts for Optoelectronic Devices , 2016 .

[20]  D. Bagnall,et al.  Broadband wavelength and angle-resolved scattering characterization for nanophotonics investigations. , 2015, Applied optics.

[21]  A. Bett,et al.  III-V Multi-junction solar cells and concentrating photovoltaic (CPV) systems , 2014 .

[22]  P. Kik.  Catoptric electrodes: transparent metal electrodes using shaped surfaces. , 2014, Optics letters.

[23]  H. Queisser.  Detailed balance limit for solar cell efficiency , 2009 .

[24]  Valentina Salomoni,et al.  Structural Design Criteria for Steel Components of Parabolic-Trough Solar Concentrators , 2007 .

[25]  Timothy A. Moss,et al.  Practical Field Alignment of Parabolic Trough Solar Concentrators , 2007 .

[26]  Andrew Blakers,et al.  A study of shading and resistive loss from the fingers of encapsulated solar cells , 1999 .

[27]  A. Blakers.  Shading losses of solar‐cell metal grids , 1992 .

[28]  R Eden,et al.  World Energy Outlook 2020 , 1981, World Energy Outlook.

[29]  H. Queisser,et al.  Detailed Balance Limit of Efficiency of p‐n Junction Solar Cells , 1961 .

[30]  R. Raffaelle,et al.  Nanostructured photovoltaics for space power , 2009 .