Dynamic modelling of a shape memory alloy adaptive tuned vibration absorber

Abstract Shape memory alloy (SMA) adaptive tuned vibration absorbers show great potential for adaptive–passive vibration control. Heating the SMA spring element in an ATVA changes the SMA elastic modulus, which results in changing the device natural frequency. With proper design, SMA ATVA may be tuned to attenuate harmonic vibration of a primary system for a range of frequencies. Continuous tuning of the SMA ATVA is realized through modulating the temperature of the SMA spring elements. A perceived limitation of SMA in vibration control applications has been a potentially large temperature hysteresis accompanying the martensitic transformation in SMA. However, with appropriate heat treatment, a rhombohedral phase (R-phase) transformation may be achieved in the material without significant hysteresis. This paper discusses the development and modelling of a continuously tuned SMA ATVA utilizing an R-phase transformation to realize online variation of the ATVA natural frequency. The models are developed for use in feedback control of an SMA ATVA. An appropriate control goal for such controllers is defined and verified.

[1]  K. K. Mahesh,et al.  Thermal and electrical characterization of R-phase dependence on heat-treat temperature in Nitinol , 1998 .

[2]  Nesbitt W. Hagood,et al.  Damping of structural vibrations with piezoelectric materials and passive electrical networks , 1991 .

[3]  Kazuto Seto,et al.  Effect of a Variable Stiffness-Type Dynamic Damper on Machine Tools with Long Overhung Ram , 1976 .

[4]  Robert J. Bernhard,et al.  NON-COLLOCATED ADAPTIVE–PASSIVE VIBRATION CONTROL , 1997 .

[5]  Joseph J. Hollkamp,et al.  A Self-Tuning Piezoelectric Vibration Absorber , 1994 .

[6]  Frederick T. Calkins,et al.  High bandwidth tunability in a smart vibration absorber , 1998, Smart Structures.

[7]  Peter H. Meckl,et al.  Modeling of SMA Tendons for Active Control of Structures , 1997 .

[8]  George A. Lesieutre,et al.  Tunable electrically shunted piezoceramic vibration absorber , 1997, Smart Structures.

[9]  George A. Lesieutre,et al.  AN ACTIVELY TUNED SOLID-STATE VIBRATION ABSORBER USING CAPACITIVE SHUNTING OF PIEZOELECTRIC STIFFNESS , 2000 .

[10]  A. Rivière,et al.  Effect of thermal cycling on the R-phase and martensitic transformations in a Ti-rich NiTi alloy , 1998 .

[11]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[12]  Shirley J. Dyke,et al.  Benchmark problems in structural control: part I—Active Mass Driver system , 1998 .

[13]  Kosuke Nagaya,et al.  Active control method for passing through critical speeds of rotating shafts by changing stiffnesses of the supports with use of memory metals , 1987 .

[14]  Robert L. Forward,et al.  Electronic damping of vibrations in optical structures. , 1979, Applied optics.

[15]  Robert J. Bernhard,et al.  Adaptive-passive noise control with self-tuning Helmholtz resonators , 1997 .

[16]  Craig A. Rogers,et al.  One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials , 1990 .

[17]  Robert J. Bernhard,et al.  ADAPTIVE PASSIVE VIBRATION CONTROL , 1996 .

[18]  P. Walsh,et al.  A variable stiffness vibration absorber for minimization of transient vibrations , 1992 .

[19]  Robert J. Bernhard,et al.  Passive-adaptive vibration absorbers using shape memory alloys , 1999, Smart Structures.

[20]  Mehdi Ahmadian,et al.  Modelling and Performance of an Experimental Active Vibration Isolator , 1995 .

[21]  A. R. Beard,et al.  Adaptive tuned vibration absorbers: Tuning laws, tracking agility, sizing, and physical implementations , 1994 .

[22]  Jian-Qiao Sun,et al.  Passive, Adaptive and Active Tuned Vibration Absorbers—A Survey , 1995 .

[23]  Amr M. Baz,et al.  Active vibration control of flexible beams using shape memory actuators , 1990 .