A stress–based approach to the optimal design of structures with unilateral behavior of material or supports

The paper presents a stress-based approach that copes with the optimal design of truss-like elastic structures in case of unilateral behavior of material or ground supports. The conventional volume-constrained minimization of compliance is coupled with a set of local stress constraints that are enforced, all over the domain or along prescribed boundaries, to control the arising of members with tension-only or compression-only strength. A Drucker–Prager failure criterion is formulated to provide a smooth approximation of the no-tension or no-compression conditions governing the stress field. A selection strategy is implemented to handle efficiently the multi-constrained formulation that is solved through mathematical programming. Benchmark examples are investigated to discuss the features of the achieved optimal designs, as compared with problems involving material and ground supports with equal behavior in tension and compression. Numerical simulations show that a limited set of constraints is needed in the first iterations to steer the solution of the energy-driven optimization towards designs accounting for the prescribed assumption of unilateral strength.

[1]  K. Cai,et al.  Tension/Compression-Only Optimal Stiffness Design with Displacement Constraint , 2010, 2010 International Conference on Intelligent Computation Technology and Automation.

[2]  Kun Cai,et al.  A simple approach to find optimal topology of a continuum with tension-only or compression-only material , 2011 .

[3]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[4]  J. Petersson,et al.  Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima , 1998 .

[5]  Michał Nowak,et al.  Structural optimization system based on trabecular bone surface adaptation , 2006 .

[6]  G. K. Ananthasuresh,et al.  Topology optimization for synthesis of contact-aided compliant mechanisms using regularized contact modeling , 2004 .

[7]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[8]  T. E. Bruns,et al.  Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .

[9]  B. Bourdin.  Filters in topology optimization , 2001 .

[10]  P. Duysinx,et al.  Topology optimization for minimum weight with compliance and stress constraints , 2012 .

[11]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[12]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[13]  M. Bruggi.  On an alternative approach to stress constraints relaxation in topology optimization , 2008 .

[14]  M. Bruggi,et al.  A fully adaptive topology optimization algorithm with goal-oriented error control , 2011 .

[15]  Peter Dewhurst,et al.  A general optimality criterion for strength and stiffness of dual-material-property structures , 2005 .

[16]  M. Zhou,et al.  Generalized shape optimization without homogenization , 1992 .

[17]  O. Sigmund.  Morphology-based black and white filters for topology optimization , 2007 .

[18]  M. Bruggi,et al.  An alternative truly-mixed formulation to solve pressure load problems in topology optimization , 2009 .

[19]  Ole Sigmund,et al.  New Developments in Handling Stress Constraints in Optimal Material Distributions , 1998 .

[20]  Julián A. Norato,et al.  Stress-based topology optimization for continua , 2010 .

[21]  Gianluca Medri,et al.  A Nonlinear Elastic Model for Isotropic Materials With Different Behavior in Tension and Compression , 1982 .

[22]  M. Bendsøe,et al.  Topology optimization of continuum structures with local stress constraints , 1998 .

[23]  E. A. de Souza Neto,et al.  Topological derivative-based topology optimization of structures subject to Drucker–Prager stress constraints , 2012 .

[24]  Gianpietro Del Piero,et al.  Constitutive equation and compatibility of the external loads for linear elastic masonry-like materials , 1989 .

[25]  G. Cheng,et al.  ε-relaxed approach in structural topology optimization , 1997 .

[26]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[27]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[28]  Anders Klarbring,et al.  Topology optimization of structures in unilateral contact , 2010 .

[29]  Z. Kang,et al.  Topology optimization of continuum structures with Drucker-Prager yield stress constraints , 2012 .

[30]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[31]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[32]  Osvaldo M. Querin,et al.  Topology optimization of truss-like continua with different material properties in tension and compression , 2010 .

[33]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[34]  Hong Guan,et al.  Evolutionary Structural Optimisation Incorporating Tension and Compression Materials , 1999 .

[35]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[36]  James K. Guest,et al.  Achieving minimum length scale in topology optimization using nodal design variables and projection functions , 2004 .

[37]  Shutian Liu,et al.  Topology optimization of continuum structures with different tensile and compressive properties in bridge layout design , 2011 .

[38]  Eduardo Alberto Fancello,et al.  Topology optimization for minimum mass design considering local failure constraints and contact boundary conditions , 2006 .

[39]  G. I. N. Rozvany,et al.  Difficulties in truss topology optimization with stress, local buckling and system stability constraints , 1996 .

[41]  M. Patriksson,et al.  Topology Optimization of Sheets in Contact by a Subgradient Method , 1997 .