Servo signal processing for flying height control in hard disk drives

A novel method of measuring the relative head-medium spacing based on a measurement in the servo sectors is developed and simulated using a read back signal model. The spacing measurement is tested experimentally on a spin stand where the flying height is varied using the resistance heater element in a thermal flying height control slider. In addition, voltage step response measurements were obtained. The data were used to perform system identification and estimate the dynamics of the thermal actuator. The model can potentially be used for thermal flying height control.

[1]  Zhong-Qing Gong,et al.  Pole-tip protrusion effect on head-disk interface at low flying clearance , 2005, INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005..

[2]  M. Kurita,et al.  Dynamically Controlled Thermal Flying-Height Control Slider , 2008, IEEE Transactions on Magnetics.

[3]  Q.H. Zeng,et al.  Flying height modulation estimation from pseudo-random readback signal in disk drives , 2003, Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401).

[4]  H. Neal Bertram,et al.  Technique to obtain head-medium magnetic spacing in a disk drive , 2005 .

[5]  Wei Hua,et al.  Effects of environmental temperature and humidity on thermal flying height adjustment , 2009 .

[6]  Zhaohui Li,et al.  Drive integration in perpendicular recording (invited) , 2006 .

[7]  Na-Young Kim,et al.  Overview of Fly Height Control Applications in Perpendicular Magnetic Recording , 2007, IEEE Transactions on Magnetics.

[8]  Lizhi Su,et al.  Drive level measurement of flying height modulation and control of slider disk contact , 2006 .

[9]  Bo Liu,et al.  Engineering study of triple-harmonic method for in situ characterization of head–disk spacing , 2002 .

[10]  J.C.L. van Peppen,et al.  Slider-disk clearance measurements in magnetic disk drives using the readback transducer , 1993, 1993 IEEE Instrumentation and Measurement Technology Conference.

[11]  Bo Liu,et al.  Tribo-magnetics and nanometer spaced head-disk systems , 2000, 2000 Asia-Pacific Magnetic Recording Conference. Digests of APMRC2000 on Mechanical and Manufacturing Aspects of HDD (Cat. No.00EX395).

[12]  Bo Liu,et al.  Tribo-magnetics and nanometer spaced head-disk systems , 2000 .

[13]  Younghee Han,et al.  Evaluating Track-Following Servo Performance of High-Density Hard Disk Drives Using Patterned Media , 2009, IEEE Transactions on Magnetics.

[14]  David B. Bogy,et al.  Simulation of Static Flying Attitudes with Different Heat Transfer Models for a Flying-Height Control Slider with Thermal Protrusion , 2010 .

[15]  H. Neal Bertram,et al.  Theory of Magnetic Recording , 1994 .

[16]  Qing-Hua Zeng,et al.  Flying height modulation estimation from pseudo-random readback signal in disk drives , 2003 .