Design of a Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

The area of pulsed-power technology covers a broad range of powers (up to 1014 W), voltages (up to 106-107 V), currents (as high as 106 A or higher) and pulse durations (below 10-8 s). State of the art systems have voltages up to a few hundred kilovolts at pulse lengths down to the nanosecond range. Special applications require extreme field strengths in the range of 1 GV/m. The design of a compact source, meeting the above requirement aims for 1 MV, 1 ns pulses. In this paper, we present a novel compact TLT (transmission line transformer). The TLT consists of 10 coaxial transmission lines which are connected in parallel at the input and in series at the output. To verify the theoretical analysis a model of the transmission line transformer has been simulated by a time domain electromagnetic field solver. An optimized transmission line transformer has been built and first measurements have been performed. The equivalent circuit model and the simulations agree with the experimental results. The effect of secondary mode suppression by means of ferrite has been investigated. Both simulations and experiments showed that ferromagnetic cores around each individual transmissions line in our design can be omitted.

[1]  P.A.A.F. Wouters,et al.  A novel circuit topology for pulsed power generation , 2003 .

[3]  K. Schoenbach,et al.  Bioelectrics-new applications for pulsed power technology , 2001, PPPS-2001 Pulsed Power Plasma Science 2001. 28th IEEE International Conference on Plasma Science and 13th IEEE International Pulsed Power Conference. Digest of Papers (Cat. No.01CH37251).

[4]  van Ejm Bert Heesch,et al.  Matching Repetitive Pulsed Power to Industrial Processes , 2004 .

[5]  K. N. Dollman,et al.  - 1 , 1743 .

[6]  G.J.H. Brussaard,et al.  A 2.5 MV subnanosecond pulser with laser triggered gap for the generation of high brightness electron bunches , 2003, Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472).

[7]  T. Reess,et al.  Optimization of the performance of a transmission line; transformer based on the use of ferrite beads , 1999 .

[8]  P. Laan,et al.  A 10 kW high-voltage pulse generator for corona plasma generation , 2001 .

[9]  S. Brussaard,et al.  A 2.5-MV subnanosecond pulser with laser-triggered spark gap for the generation of high-brightness electron bunches , 2004, IEEE Transactions on Plasma Science.

[10]  P.A.A.F. Wouters,et al.  Transmission line transformers for up to 100 kW pulsed power generation , 2002, Conference Record of the Twenty-Fifth International Power Modulator Symposium, 2002 and 2002 High-Voltage Workshop..

[11]  K. Debnath,et al.  A transmission line based compact repetitive and portable cascaded Blumlein pulser , 2004, Conference Record of the Twenty-Sixth International Power Modulator Symposium, 2004 and 2004 High-Voltage Workshop..

[12]  Paul W. Smith,et al.  Transient Electronics: Pulsed Circuit Technology , 2002 .

[13]  P.W. Smith,et al.  A Repetitive, Thyratron Switched, 200kv, Fast Rise-time Pulse Generator, Based On A Stacked Transmission Line Transformer , 1991, Eighth IEEE International Conference on Pulsed Power.

[14]  Ian Alexander D. Lewis,et al.  Millimicrosecond pulse techniques , 1954 .

[15]  F. Davanloo,et al.  Switching the stacked Blumlein pulsers status and issues , 1995, Digest of Technical Papers. Tenth IEEE International Pulsed Power Conference.

[16]  P. W. Smith,et al.  Compact, repetitive, pulsed power generators based on transmission line transformers , 1989, 7th Pulsed Power Conference.