Interconnection and electromigration scaling theory

Interconnections will become the limit in performance and reliability at submicrometer dimensions. Long-distance interconnections are defined using models based on resistivity, and it is found that more than half of the interconnections will become categorized as such at 0.5-µm feature sizes. The resistivity of even less resistive materials, therefore, will become important. A model for analyzing the trends of material usage for interconnections and for projecting design rules is presented. Electromigration is the driving force away from the lowest resistivity silicon compatible material, namely aluminum. Replacements such as gold, however, have technological problems and the resistivity of refractory metals will be too high for a large fraction of the interconnections. Layered structures are one possible solution to the problems of electromigration and hillocks.

[1]  Donald W. Calabrese,et al.  Phenomenological Observations on Electromigration , 1983, 21st International Reliability Physics Symposium.

[2]  H. B. Bakoglu,et al.  New CMOS Driver and Receiver Circuits Reduce Interconnection Propagation Delays , 1985, 1985 Symposium on VLSI Technology. Digest of Technical Papers.

[3]  D. C. Dening,et al.  A New Failure Mechanism in thin Gold Films at Elevated Temperatures , 1982, 20th International Reliability Physics Symposium.

[4]  P. Chatterjee,et al.  The impact of scaling laws on the choice of n-channel or p-channel for MOS VLSI , 1980, IEEE Electron Device Letters.

[5]  H. J. Bhatt.  Superior aluminum for interconnection of monolithic integrated circuits , 1970 .

[6]  Rolf E. Hummel,et al.  The effect of minor constituents on the electrotransport‐induced failure site in thin gold films , 1978 .

[7]  J. Black.  Electromigration failure modes in aluminum metallization for semiconductor devices , 1969 .

[8]  H.-U. Schreiber,et al.  Lifetime and drift velocity analysis for electromigration in sputtered Al films, multilayers, and alloys , 1983 .

[9]  I. Blech.  Electromigration in thin aluminum films on titanium nitride , 1976 .

[10]  P. Solomon,et al.  A comparison of semiconductor devices for high-speed logic , 1982, Proceedings of the IEEE.

[11]  H.-U. Schreiber.  Bulk electromigration by eliminating grain boundary mass flow in continuous aluminum lines , 1986 .

[12]  T. Sakurai,et al.  Approximation of wiring delay in MOSFET LSI , 1983, IEEE Journal of Solid-State Circuits.

[13]  J. McPherson,et al.  Electromigration and microstructural properties of AI-Si/Ti/AI-Si VLSI metallization , 1986 .

[14]  P. Ghate,et al.  Electromigration‐Induced Failures in, and Microstructure and Resistivity of, Sputtered Gold Films , 1972 .

[15]  J. McPherson,et al.  Stress Dependent Activation Energy , 1986, 24th International Reliability Physics Symposium.

[16]  C. J. Dell'oca,et al.  Anodization of aluminum to inhibit hillock growth during high temperature processing , 1971 .

[17]  R. A. Kushner,et al.  Chemically Vapor Deposited Tungsten for Semiconductor Metallizations , 1974 .

[18]  William E. Engeler,et al.  Performance of refractory metal multilevel interconnection system , 1972 .

[19]  P. Ghate,et al.  Electromigration-Induced Failures in VLSI Interconnects , 1982, 20th International Reliability Physics Symposium.

[20]  E. Levine,et al.  Electromigration Induced Damage and Structure Change in Cr-Al/Cu and Al/Cu Interconnection Lines , 1984, 22nd International Reliability Physics Symposium.

[21]  J.D. Meindl,et al.  Optimal interconnection circuits for VLSI , 1985, IEEE Transactions on Electron Devices.

[22]  R. Penney.  Current-induced mass transport in aluminum☆ , 1964 .

[23]  T. W. Sigmon,et al.  Diffusion of metals in silicon dioxide , 1983 .

[24]  K. Steinhubl.  Design of Ion-Implanted MOSFET'S with Very Small Physical Dimensions , 1974 .

[25]  Krishna C. Saraswat,et al.  Effect of scaling of interconnections on the time delay of VLSI circuits , 1982 .

[26]  K.C. Saraswat,et al.  Effect of scaling of interconnections on the time delay of VLSI circuits , 1982, IEEE Transactions on Electron Devices.