Effect of the turn-on delay of a semiconductor laser on clipping impulsive noise

The performance of hybrid multichannel AM/QAM fiber-optic transmission systems is constrained by clipping impulsive noise, which must be suitably taken into account to select system parameters. In this letter, the influence of semiconductor laser turn-on delay is considered in the evaluation of the effects due to clipping impulsive noise.

[1]  Niloy K. Dutta,et al.  Long wavelength semiconductor lasers , 1988, Technical Digest., International Electron Devices Meeting.

[2]  James E. Mazo.  Asymptotic distortion spectrum of clipped, DC-biased, Gaussian noise [optical communication] , 1992, IEEE Trans. Commun..

[3]  C. Su,et al.  Simultaneous measurement of spontaneous emission rate, nonlinear gain coefficient, and carrier lifetime in semiconductor lasers using a parasitic‐free optical modulation technique , 1990 .

[4]  Kazuki Maeda,et al.  BER characteristics of 16QAM in an AM/16QAM hybrid optical transmission system , 1993 .

[5]  J. Conradi,et al.  Impact of noise and nonlinear distortion due to clipping on the BER performance of a 64-QAM signal in hybrid AM-VSB/QAM optical fiber transmission system , 1995 .

[6]  E. Bravi,et al.  Statistical analysis of clipping filtered impulsive noise , 1996, IEEE Photonics Technology Letters.

[7]  Katsuyuki Fujito,et al.  Analysis of BER of 16QAM signal in AM/16QAM hybrid optical transmission system , 1993 .

[8]  Qun Shi.  Performance limits on M-QAM transmission in hybrid multichannel AM/QAM fiber optic systems , 1993 .

[9]  Rolf Dr Heidemann,et al.  Hybrid transmission of analogue PAL and digital 64-QAM CATV channels , 1995 .

[10]  T. Anderson,et al.  The frequency dependence of clipping induced bit-error rates in subcarrier multiplexed systems , 1996, IEEE Photonics Technology Letters.

[11]  E. Bravi,et al.  Effect of clipping impulsive noise in a hybrid optical‐fiber/coaxial network for transmission of subcarrier‐multiplexing (SCM) analog and digital channels , 1996 .