Highly stretchable and sensitive strain sensor based on graphene- elastomer composites with a novel double-interconnected network

The construction of a continuous conductive network with a low percolation threshold plays a key role in fabricating a high performance strain sensor. Herein, a highly stretchable and sensitive strain sensor based on binary rubber blend/graphene was fabricated by a simple and effective assembly approach. A novel double-interconnected network composed of compactly continuous graphene conductive networks was designed and constructed using the composites, thereby resulting in an ultralow percolation threshold of 0.3 vol%, approximately 12-fold lower than that of the conventional graphene-based composites with a homogeneously dispersed morphology (4.0 vol%). Near the percolation threshold, the sensors could be stretched in excess of 100% applied strain, and exhibited a high stretchability, sensitivity (gauge factor ∼82.5) and good reproducibility (∼300 cycles) of up to 100% strain under cyclic tensile tests. The proposed strategy provides a novel effective approach for constructing a double-interconnected conductive network using polymer composites, and is very competitive for developing and designing high performance strain sensors.

[1]  Chang Liu,et al.  Comparison of electrical properties between multi-walled carbon nanotube and graphene nanosheet/high density polyethylene composites with a segregated network structure , 2011 .

[2]  Ammar B. Kouki,et al.  Development and Characterization of a Novel Interdigitated Capacitive Strain Sensor for Structural Health Monitoring , 2015, IEEE Sensors Journal.

[3]  Jong-Hyun Ahn,et al.  Graphene-based transparent strain sensor , 2013 .

[4]  G. Tröster,et al.  Sensor for Measuring Strain in Textile , 2008, Sensors.

[5]  W. Gong,et al.  Graphene networks and their influence on free-volume properties of graphene-epoxidized natural rubber composites with a segregated structure: rheological and positron annihilation studies. , 2015, Physical chemistry chemical physics : PCCP.

[6]  Q. Zheng,et al.  Time dependence of piezoresistance for the conductor-filled polymer composites , 2000 .

[7]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.

[8]  L. Kong,et al.  Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks , 2014 .

[9]  J. Razal,et al.  Achieving Outstanding Mechanical Performance in Reinforced Elastomeric Composite Fibers Using Large Sheets of Graphene Oxide , 2015 .

[10]  Mark J. Schulz,et al.  A carbon nanotube strain sensor for structural health monitoring , 2006 .

[11]  Tingting Yang,et al.  Wearable and Highly Sensitive Graphene Strain Sensors for Human Motion Monitoring , 2014 .

[12]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[13]  John A. Rogers,et al.  Highly Sensitive Skin‐Mountable Strain Gauges Based Entirely on Elastomers , 2012 .

[14]  Xiaodong Wu,et al.  Tailoring percolating conductive networks of natural rubber composites for flexible strain sensors via a cellulose nanocrystal templated assembly. , 2016, Soft matter.

[15]  Huanyu Cheng,et al.  Graphene Reinforced Carbon Nanotube Networks for Wearable Strain Sensors , 2016 .

[16]  Fan Li,et al.  Large-scale assembly of highly sensitive Si-based flexible strain sensors for human motion monitoring. , 2016, Nanoscale.

[17]  R. Ruoff,et al.  Processing–Morphology–Property Relationships and Composite Theory Analysis of Reduced Graphene Oxide/Natural Rubber Nanocomposites , 2012 .

[18]  Sang-Gook Kim,et al.  Extremely Elastic Wearable Carbon Nanotube Fiber Strain Sensor for Monitoring of Human Motion. , 2015, ACS nano.

[19]  Chieh-Min Wang,et al.  A Miniature Mechanical-Piezoelectric-Configured Three-Axis Vibrational Energy Harvester , 2015, IEEE Sensors Journal.

[20]  Tae-Jun Ha,et al.  Waterproof Electronic-Bandage with Tunable Sensitivity for Wearable Strain Sensors. , 2016, ACS applied materials & interfaces.

[21]  Yang Liu,et al.  Sensitive, high-strain, high-rate bodily motion sensors based on graphene-rubber composites. , 2014, ACS nano.

[22]  Jan-Chan Huang,et al.  Carbon black filled conducting polymers and polymer blends , 2002 .

[23]  Babak Ziaie,et al.  Highly stretchable and sensitive unidirectional strain sensor via laser carbonization. , 2015, ACS applied materials & interfaces.

[24]  N. Bourne,et al.  On the analysis of transverse stress gauge data from shock loading experiments , 1996 .

[25]  H. Pang,et al.  Conductive polymer composites with segregated structures , 2014 .

[26]  Marino Lavorgna,et al.  Enhancing electrical conductivity of rubber composites by constructing interconnected network of self-assembled graphene with latex mixing , 2012 .

[27]  Mehmet Turan,et al.  Parallel Microcracks-based Ultrasensitive and Highly Stretchable Strain Sensors. , 2016, ACS applied materials & interfaces.

[28]  Y. Lin,et al.  A new approach to construct three dimensional segregated graphene structures in rubber composites for enhanced conductive, mechanical and barrier properties , 2016 .

[29]  Sejin Kwon,et al.  Thin Polysilicon Gauge for Strain Measurement of Structural Elements , 2010, IEEE Sensors Journal.

[30]  Bo Zhang,et al.  High-performance strain sensors based on functionalized graphene nanoplates for damage monitoring , 2016 .

[31]  Kun Dai,et al.  Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications , 2016 .

[32]  I. Park,et al.  Highly stretchable and sensitive strain sensor based on silver nanowire-elastomer nanocomposite. , 2014, ACS nano.

[33]  Petr Svoboda,et al.  A Flexible Multifunctional Sensor Based on Carbon Nanotube/Polyurethane Composite , 2013, IEEE Sensors Journal.