Incorporation of coal combustion residuals into calcium sulfoaluminate-belite cement clinkers

Abstract In recent years, calcium sulfoaluminate-belite (CSAB) cement has been promoted as a sustainable alternative to Portland cement due to lower energy used and less CO 2 emitted during production, while providing comparable performance. However, a potential problem facing the widespread adoption and production of CSAB cement is the cost and availability of raw materials and it is therefore desirable to find alternative raw materials to keep costs competitive. In this study, two CSAB cement clinkers with a similar target phase composition were synthesized from combinations of natural and waste materials (coal combustion residuals). The two CSAB cement clinkers were compared against a CSAB clinker made from reagent-grade chemicals, enabling examination of the effects of impurities on performance. Cements made from the clinkers were examined for hydration rate, hydration product formation, dimensional stability, and compressive strength.

[1]  H. Brouwers.  Chemical Reactions in hydrated Ordinary Portland Cement based on the work by Powers and Brownyard , 2003 .

[2]  Jan Skalny,et al.  Alkalies in cement: A review: II. Effects of alkalies on hydration and performance of Portland cement , 1978 .

[3]  S. Sahu,et al.  Preparation of sulphoaluminate belite cement from fly ash , 1994 .

[4]  C. D. Lawrence,et al.  Calcium sulfoaluminate cements—low-energy cements, special cements or what? , 1999 .

[5]  P. Stutzman,et al.  Phase composition analysis of the NIST reference clinkers by optical microscopy and X-ray powder diffraction , 2002 .

[6]  D. Knöfel,et al.  Influence of alkalies on the composition of belite-rich cement clinkers and the technological properties of the resulting cements , 1986 .

[7]  Edward K. Rice,et al.  DETERMINATION OF WATER-TO-CEMENT RATIO IN FRESHLY MIXED RAPID-SETTING CALCIUM SULFOALUMINATE CONCRETE USING 2.45 GHZ MICROWAVE RADIATION , 2004 .

[8]  A. Chatterji,et al.  Hydration of Portland Cement , 1965, Nature.

[9]  Paul E. Stutzman,et al.  Scanning electron microscopy imaging of hydraulic cement microstructure , 2004 .

[10]  Della M. Roy,et al.  Sulfoaluminate-belite cement from low-calcium fly ash and sulfur-rich and other industrial by-products , 1999 .

[11]  K. Snyder,et al.  Sulfate Resistance of Concrete: A New Approach , 2006 .

[12]  André Nonat,et al.  Mechanisms and Parameters Controlling the Tricalcium Aluminate Reactivity in the Presence of Gypsum , 2007 .

[13]  D. Roy,et al.  Relationship between raw mixture and mineralogical composition of sulphoaluminate belite clinkers in the system CaOSiO2Al2O3Fe2O3SO3 , 1993 .

[14]  A. Neville.  THE CONFUSED WORLD OF SULFATE ATTACK ON CONCRETE , 2004 .

[15]  M. Juenger,et al.  Synthesis and hydration of calcium sulfoaluminate-belite cements with varied phase compositions , 2011 .

[16]  Ruben Kretzschmar,et al.  Influence of Citric Acid on the Hydration of Portland Cement , 2009 .

[17]  R. Bogue,et al.  Calculation of the Compounds in Portland Cement , 1929 .

[18]  Donald E. Macphee,et al.  A physico-chemical basis for novel cementitious binders , 2011 .

[19]  Xiaolu Guo,et al.  Utilization of municipal solid waste incineration fly ash for sulfoaluminate cement clinker production. , 2011, Waste management.

[20]  F. Glasser,et al.  High-performance cement matrices based on calcium sulfoaluminate–belite compositions , 2001 .

[21]  J. Bullard,et al.  Particle Size Distribution by LASER Diffraction Spectrometry: Application to Cementitious Powders | NIST , 2006 .

[22]  M. Juenger,et al.  Understanding expansion in calcium sulfoaluminate–belite cements , 2012 .

[23]  David W. Richerson,et al.  Modern ceramic engineering: Properties, processing and use in design , 2018 .

[24]  Liang Zhang,et al.  Development of the use of sulfo- and ferroaluminate cements in China , 1999 .

[25]  C. Alexandridou,et al.  A study on the hydration products of a non-expansive sulfoaluminate cement , 1995 .

[26]  Á. G. Torre,et al.  Reactive belite stabilization mechanisms by boron-bearing dopants , 2012 .

[27]  Hydraulic behaviour of calcium sulfoaluminate-based cements derived from industrial process wastes , 1993 .

[28]  J. Phair.  Green chemistry for sustainable cement production and use , 2006 .