Vibrations of steel–concrete composite beams with partially degraded connection and applications to damage detection

Abstract Vibrational methods are frequently used as diagnostic tools to detect damage in structures. One of the main difficulties connected with the use of such methods lies in the small sensitivity of the dynamic parameters to damage. This is an intrinsic feature of structural diagnostics based on dynamic data. It represents a source of important indeterminacy, such as the strong dependence of the results of identification on the experimental errors and on the accuracy of the structural model that is chosen to interpret measurements. Application of dynamic techniques to the case of steel–concrete composite beams, in addition, makes the problem more complicated, owing to the uncertainty about the mechanical behaviour of the connection and damage modelling. Previous research on vibrational methods for damage detection in composite beams was concerned with the identification of severe levels of damage. In this paper we present an Euler–Bernoulli model of composite beam which accurately describes the dynamic response measured on composite beams with either severe or intermediate levels of damage. A diagnostic technique based on frequency measurements is then applied to the suggested model and it gives positive results. A Timoshenko model of composite beam is also derived and used for diagnostic purposes.

[1]  Gen Nakamura,et al.  An inverse dynamical problem for connected beams , 2004, European Journal of Applied Mathematics.

[2]  Michele Dilena,et al.  A Damage Analysis of Steel-Concrete Composite Beams Via Dynamic Methods: Part II. Analytical Models and Damage Detection , 2003 .

[3]  V Kristek,et al.  ANALYSIS OF COMPOSITE GIRDERS WITH DEFORMABLE CONNECTORS. , 1982 .

[4]  R. B. Testa,et al.  Modal Analysis for Damage Detection in Structures , 1991 .

[5]  Gen Nakamura,et al.  A variational approach for an inverse dynamical problem for composite beams , 2007, European Journal of Applied Mathematics.

[6]  Antonino Morassi,et al.  Vibrations of Steel-Concrete Composite Beams , 2000 .

[7]  Antonino Morassi,et al.  A Damage Analysis of Steel-Concrete Composite Beams Via Dynamic Methods: Part I. Experimental Results , 2003 .

[8]  Raimondo Betti,et al.  Elastic composite beams , 1996 .

[9]  Tomasz Wróblewski,et al.  Vibration of Steel–Concrete Composite Beams Using the Timoshenko Beam Model , 2005 .

[10]  Robert Y. Liang,et al.  Quantitative NDE technique for assessing damages in beam structures , 1992 .

[11]  R. P. Johnson.  Composite Structures of Steel and Concrete , 1975 .

[12]  N. Gattesco,et al.  Analytical modeling of nonlinear behavior of composite beams with deformable connection , 1999 .

[13]  Antonino Morassi,et al.  Localizing a Notch in a Steel Frame from Frequency Measurements , 1997 .

[14]  Fabrizio Vestroni,et al.  Use of Frequency Change for Damage Identification in Reinforced Concrete Beams , 2003 .

[15]  Fabrizio Gatti,et al.  A damage analysis of steel beams , 1993 .

[16]  H. Weinberger,et al.  A first course in partial differential equations , 1965 .

[17]  M. I. Belishev,et al.  Reconstruction of the parameters of a system of connected beams from dynamic boundary measurements. , 2005 .

[18]  Hong Hao,et al.  Dynamic assessment of shear connectors in slab-girder bridges , 2007 .

[19]  Antonino Morassi,et al.  Damage detection and generalized Fourier coefficients , 2007 .

[20]  Antonino Morassi,et al.  Modal analysis of notched bars: tests and comments on the sensitivity of an identification technique , 1995 .

[21]  Michele Dilena,et al.  Experimental Modal Analysis of Steel Concrete Composite Beams with Partially Damaged Connection , 2004 .

[22]  A. O. Adekola,et al.  Partial interaction between elastically connected elements of a composite beam , 1968 .