Modeling of transfer path for determination of combustion and noise metrics on diesel engines
暂无分享,去创建一个
[1] Arsham J. Shahlari,et al. Comparison of Compression Ignition Engine Noise Metrics in Low-Temperature Combustion Regimes , 2013 .
[2] Lin Chen,et al. Optimal Feedback Control with in-Cylinder Pressure Sensor under Engine Start Conditions , 2011 .
[3] Johann F. Böhme,et al. In-Cylinder Pressure Estimation from Structure-Borne Sound , 2000 .
[4] Eiji Tomita,et al. Fundamental study on combustion diagnostics using a spark plug as ion probe , 2000 .
[5] Giancarlo Chiatti,et al. Accelerometer Measurements to Optimize the Injection Strategy , 2012 .
[6] Andrew E. Yagle,et al. Modeling and identification of the combustion pressure process in internal combustion engines , 1993, Proceedings of 36th Midwest Symposium on Circuits and Systems.
[7] M. F. Russell,et al. Automotive Diesel Engine Noise and Its Control , 1973 .
[9] Giorgio Rizzoni,et al. Estimate of indicated torque from crankshaft speed fluctuations: a model for the dynamics of the IC engine , 1989 .
[10] Myoungho Sunwoo,et al. Cylinder Pressure Based Combustion Phasing Control of a CRDI Diesel Engine , 2007 .
[11] S. Fassois. MIMO LMS-ARMAX IDENTIFICATION OF VIBRATING STRUCTURES—PART I: THE METHOD , 2001 .
[12] John B. Heywood,et al. Internal combustion engine fundamentals , 1988 .
[13] Jeffrey Naber,et al. Accelerometer Based Sensing of Combustion in a High Speed HPCR Diesel Engine , 2007 .
[14] D. de Klerk,et al. Operational transfer path analysis: Theory, guidelines and tire noise application , 2010 .
[15] Jeffrey Naber,et al. Accelerometer-based combustion metrics reconstruction with radial basis function neural network for a 9 L diesel engine , 2014 .
[16] J.F. Bohme,et al. Misfire detection in spark-ignition engines with the EM algorithm , 2003, Proceedings of the 3rd IEEE International Symposium on Signal Processing and Information Technology (IEEE Cat. No.03EX795).
[17] J. Winkelman,et al. Combustion characteristics detection for low pressure direct injection engines using ionization signal , 2006 .
[18] Dinu Taraza,et al. Determination of the Gas-Pressure Torque of a Multicylinder Engine from Measurements of the Crankshaft's Speed Variation , 1998 .
[19] John J. Moskwa,et al. Cylinder pressure and combustion heat release estimation for SI engine diagnostics using nonlinear sliding observers , 1995, IEEE Trans. Control. Syst. Technol..
[20] Charles A. Amann,et al. Cylinder-Pressure measurement and Its Use in Engine Research , 1985 .
[21] Edward Winward,et al. Online Adjustment of Start of Injection and Fuel Rail Pressure Based on Combustion Process Parameters of Diesel Engine , 2013 .
[22] Kyoungdoug Min,et al. Detection of combustion start in the controlled auto ignition engine by wavelet transform of the engine block vibration signal , 2008 .
[23] M. Graboski,et al. In-Use Emissions from Heavy-Duty Diesel Vehicles , 2000 .
[24] Robert B. Randall,et al. RECONSTRUCTION OF DIESEL ENGINE CYLINDER PRESSURE USING A TIME DOMAIN SMOOTHING TECHNIQUE , 1999 .
[25] F. Taglialatela,et al. Determination of combustion parameters using engine crankshaft speed , 2013 .
[26] M. Bellenoue,et al. APPLICATION OF IONIZATION PROBES FOR DIAGNOSTICS OF KNOCKING COMBUSTION , 2011 .
[27] Antonio J. Torregrosa,et al. Combustion noise level assessment in direct injection Diesel engines by means of in-cylinder pressure components , 2007 .
[28] Jaemin Jin,et al. An Advanced Method for Developing Combustion Noise through the Analysis of Diesel Combustion , 2013 .
[29] Fabrice Gautier,et al. Optimization of Combustion Noise of Modern Diesel Engines for Passenger Cars , 2007 .
[30] Jeffrey Naber,et al. Analysis of Combustion Knock Metrics in Spark-Ignition Engines , 2006 .
[31] Russell C. Eberhart,et al. Multiobjective optimization using dynamic neighborhood particle swarm optimization , 2002, Proceedings of the 2002 Congress on Evolutionary Computation. CEC'02 (Cat. No.02TH8600).
[32] Jeung Tae Kim. Source and path recovery from vibration response monitoring , 1987 .
[33] Johann F. Böhme,et al. Pressure reconstruction and misfire detection from multichannel structure-borne sound , 2004, 2004 IEEE International Conference on Acoustics, Speech, and Signal Processing.
[34] Guang-Bin Huang,et al. Neuron selection for RBF neural network classifier based on data structure preserving criterion , 2005, IEEE Transactions on Neural Networks.
[35] G. Zhu,et al. Knock Detection for a Large Displacement Air-Cooled V-Twin Motorcycle Engine Using In-Cylinder Ionization Signals , 2008 .
[36] Jeong Woo Lee,et al. Study on Reduction of Diesel Engine Out Emission through Closed Loop Control based on the In-Cylinder Pressure with EGR Model , 2013 .
[37] Roger Johnsson,et al. Cylinder pressure reconstruction based on complex radial basis function networks from vibration and speed signals , 2006 .
[38] Nicolò Cavina,et al. In-Cylinder Pressure Reconstruction Based on Instantaneous Engine Speed Signal , 2002 .
[39] R. Eberhart,et al. Empirical study of particle swarm optimization , 1999, Proceedings of the 1999 Congress on Evolutionary Computation-CEC99 (Cat. No. 99TH8406).
[40] George Saikalis,et al. Knock Signal Analysis Using the Discrete Wavelet Transform , 2006 .
[42] Stefan Heuer,et al. Application of Combustion Sound Level (CSL) Analysis for Powertrain , 2009 .
[43] T. Priede,et al. ORIGINS OF DIESEL ENGINE NOISE , 1959 .
[44] Antonio J. Torregrosa,et al. Wavelet Transform applied to Combustion Noise Analysis in High-speed DI Diesel Engines , 2001 .
[45] Li Chen,et al. Method to Efficiently Implement Automotive Application Algorithms Using Signal Processing Engine (SPE) of Copperhead Microcontroller , 2008 .
[46] J. O. Chae,et al. A Study on the Possibility of Estimation of In-Cylinder Pressure by Means of Measurement of Spark Gap Breakdown Voltage , 1999 .
[47] Christopher J. Polonowski. Accelerometer based measurements of combustion in an automotive turbocharged diesel engine , 2009 .
[48] Mark Beale,et al. Neural Network Toolbox™ User's Guide , 2015 .
[49] Jeffrey Naber,et al. Signal Processing Parameters for Estimation of the Diesel Engine Combustion Signature , 2011 .
[50] Simona Silvia Merola,et al. Use of Accelerometers for Spark Advance Control of SI Engines , 2009 .
[51] Romualdo Ruotolo,et al. NVH Development of EU5 2.0L and 2.2L Diesel Engine , 2011 .
[52] Thomas W. Ryan,et al. Cetane Effect on Diesel Ignition Delay Times Measured in a Constant Volume Combustion Apparatus , 1995 .
[53] R. Beckwith. Diesel-Engine Management , 2004 .
[54] Alice J. O'Toole,et al. Low-dimensional representation of faces in higher dimensions of the face space , 1993 .
[55] Stefan Pischinger,et al. Diesel Combustion Control with Closed-Loop Control of the Injection Strategy , 2008 .
[56] Katarzyna Bizon,et al. Reconstruction of In-Cylinder Pressure in a Diesel Engine from Vibration Signal Using a RBF Neural Network Model , 2011 .
[57] Rolf D. Reitz,et al. Effects of Engine Operating Parameters on near Stoichiometric Diesel Combustion Characteristics , 2007 .
[58] John Alexander Steel,et al. Indirect measurement of cylinder pressure from diesel engines using acoustic emission , 2005 .
[59] Giancarlo Chiatti,et al. In-Cylinder Pressure Analysis through Accelerometer Signal Processing for Diesel Engine Combustion Optimization , 2009 .
[60] Andrew Ball,et al. A RBF neural network model for cylinder pressure reconstruction in internal combustion engines , 1996 .
[61] H. Dwyer,et al. Dynamometer Testing of a Heavy Duty Diesel Engine Equipped with a Urea-SCR System , 2001 .
[62] Wen-Hua Chen,et al. Computationally Inexpensive Methods of Ion Current Signal Manipulation for Predicting the Characteristics of Engine In-Cylinder Pressure , 2006 .
[63] Shang-Liang Chen,et al. Orthogonal least squares learning algorithm for radial basis function networks , 1991, IEEE Trans. Neural Networks.
[64] B. K. Powell,et al. Advanced Real-Time Powertrain Systems Analysis , 1988 .
[65] Andreas Mueller,et al. Closed Loop Control of an HCCI Multi-Cylinder Engine and Corresponding Adaptation Strategies , 2009 .
[66] Andrew Peter Walker,et al. NOx and PM reduction using combined SCR and DPF technology in heavy duty diesel applications , 2005 .
[67] B. P. Bogert,et al. The quefrency analysis of time series for echoes : cepstrum, pseudo-autocovariance, cross-cepstrum and saphe cracking , 1963 .
[68] K. Reif. Diesel Engine Management , 2014 .
[69] S. Charlton,et al. Developing Diesel Engines to Meet Ultra-low Emission Standards , 2005 .
[70] Rodolfo Taccani,et al. Wavelet analysis of cycle-to-cycle pressure variations in an internal combustion engine , 2006, nlin/0607041.
[71] Y. Bouslimani,et al. Application of Particle Swarm Optimization Technique for an Optical Fiber Alignment System , 2012 .
[72] Guoming G. Zhu,et al. MBT Timing Detection and its Closed-Loop Control Using In-Cylinder Ionization Signal , 2004 .
[73] Jonathan Chauvin,et al. Combustion Parameters Estimation Based on Knock Sensor for Control Purpose Using Dedicated Signal Processing Platform , 2008 .
[74] Rolf D. Reitz,et al. Effects of Multiple Injections and Flexible Control of Boost and EGR on Emissions and Fuel Consumption of a Heavy-Duty Diesel Engine , 2001 .
[75] Richard H. Lyon,et al. Cepstral analysis as a tool for robust processing, deverberation and detection of transients , 1992 .
[76] Christoph Steffens,et al. Comprehensive Combustion Noise Optimization , 2001 .
[77] Satish Chand,et al. Reconstruction of cylinder pressure for SI engine using recurrent neural network , 2010, Neural Computing and Applications.
[78] Feilong Liu,et al. An Experimental Study on Engine Dynamics Model Based In-Cylinder Pressure Estimation , 2012 .
[79] Arief Hariyanto,et al. Application of Wavelet Analysis to Determine the Start of Combustion of Diesel Engines , 2007 .
[80] P. Pirinoli,et al. Some Insight Over New Variations of the Particle Swarm Optimization Method , 2006, IEEE Antennas and Wireless Propagation Letters.
[81] Johann F. Böhme,et al. Fast in-cylinder pressure reconstruction from structure-borne sound using the EM algorithm , 2003, 2003 IEEE International Conference on Acoustics, Speech, and Signal Processing, 2003. Proceedings. (ICASSP '03)..