Investigation on the Effects of Process Parameters on the Mechanical and Corrosion Behaviour of Friction Stir-Claded AZ31B Magnesium Alloy

[1]  K. Krasnowski.  Experimental Study of FSW T-joints of EN-AW 6082-T6 and Their Behaviour Under Static Loads , 2014 .

[2]  H. M. Zakaria,et al.  Friction Stir Welding of Dissimilar A319 and A413 Cast Aluminum Alloys , 2014 .

[3]  Soner Savaş,et al.  Relation Between Coating Parameters and Structural and Mechanical Properties of Magnetron Sputtered TiAlN Coatings , 2014 .

[4]  Logan L. Grado,et al.  Effects of pretreatment and process temperature of a conversion coating produced by an aprotic ammonium-phosphate ionic liquid on magnesium corrosion protection , 2014 .

[5]  G. Tosun.  Ni–WC Coating on AISI 1010 Steel Using TIG: Microstructure and Microhardness , 2014 .

[6]  G. Tosun.  Coating of AISI 1010 Steel by Ni–WC Using Plasma Transferred Arc Process , 2014 .

[7]  P. Chu,et al.  Plasma modified Mg-Nd-Zn-Zr alloy with enhanced surface corrosion resistance , 2014 .

[8]  Xiang He,et al.  Effect of cerium additive on aluminum-based chemical conversion coating on AZ91D magnesium alloy , 2013 .

[9]  S. Buytoz,et al.  Microstructural Development of Fe–Cr–C and B4C Powder Alloy Coating on Stainless Steel by Plasma-Transferred Arc Weld Surfacing , 2013 .

[10]  B. Kurt,et al.  Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel , 2013, Arabian Journal for Science and Engineering.

[11]  J. Rams,et al.  Influence of high velocity oxygen-fuel spraying parameters on the wear resistance of Al–SiC composite coatings deposited on ZE41A magnesium alloy , 2013 .

[12]  Ying Ma,et al.  Corrosion behavior of micro-arc oxidation coating on AZ91D magnesium alloy in NaCl solutions with different concentrations , 2012 .

[13]  Chao Xu,et al.  Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature , 2012 .

[14]  K. Nakata,et al.  Dissimilar metal joining of ZK60 magnesium alloy and titanium by friction stir welding , 2012 .

[15]  Jian-qing Zhang,et al.  Electrodeposition of high corrosion resistance Cu/Ni–P coating on AZ91D magnesium alloy , 2011 .

[16]  W. Dai,et al.  Improving wear resistance and corrosion resistance of AZ31 magnesium alloy by DLC/AlN/Al coating , 2010 .

[17]  Y. Zuo,et al.  The influences of duty cycle on the bonding strength of AZ31B magnesium alloy by microarc oxidation treatment , 2010 .

[18]  Le Zhou,et al.  Enhanced corrosion protection of MgO coatings on magnesium alloy deposited by an anodic electrodeposition process , 2010 .

[19]  R. Akid,et al.  Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route , 2010 .

[20]  Lionel Fourment,et al.  Friction model for friction stir welding process simulation: Calibrations from welding experiments , 2010 .

[21]  A. N. Khramov,et al.  Sol gel coatings with phosphonate functionalities for surface modification of magnesium alloys , 2006 .

[22]  M. Lohrengel,et al.  Investigation of the macroscopic and microscopic electrochemical corrosion behaviour of PVD-coated magnesium die cast alloy AZ91 , 2005 .