Real-Time Temperature Sensor Based on In-Fiber Fabry–Perot Interferometer Embedded in a Resin

A simple to fabricate, cost-effective, robust, and highly accurate fiber optic temperature sensor is proposed and experimentally demonstrated. The sensor head consists of an in-fiber Fabry–Perot interferometer (FFPI) embedded in a mold made of a polyester resin. FFPI, which in general present good strain sensitivity and low-temperature sensitivity, was assembled by splicing a microsegment of capillary fiber of 14.66 μm between two single-mode fibers. The reflected spectrum of the FFPI exhibited a single interference dip within a span of 80 nm. The dimensions of the resin mold can be modified by changing the ambient temperature, which in turn changes the length of the FFPI air-cavity. The dip of the reflected spectrum is shifted toward shorter (larger) wavelengths when external temperature is decreased (increased). The large free spectral range (FSR) allowed to monitor the temperature changes by either a wavelength or an intensity interrogation scheme. Using a laser and an optical power meter it was possible to demonstrate a real-time temperature sensor with a sensitivity of −60.79 nW/°C and a resolution of 0.5 °C, in the range of 10–30 °C. We believe that the practicality of this real-time sensor can be very attractive for environmental sensing application.

[1]  Shuguang Li,et al.  Enhanced sensitivity of temperature sensor by a PCF with a defect core based on Sagnac interferometer , 2018 .

[2]  Xianqiao Wang,et al.  Stretchable fiber-Bragg-grating-based sensor. , 2018, Optics letters.

[3]  M. Cao,et al.  Fiber-optic composite cure sensor: monitoring the curing process of composite material based on intensity modulation , 2003 .

[4]  J. Villatoro,et al.  Highly Sensitive Temperature Sensor Based on a Polymer-Coated Microfiber Interferometer , 2015, IEEE Photonics Technology Letters.

[5]  Kent A. Murphy,et al.  Wavelength-tracked white light interferometry for highly sensitive strain and temperature measurements , 1996 .

[6]  Chuji Wang,et al.  In situ monitoring of prestressed concrete using embedded fiber loop ringdown strain sensor , 2018, Measurement.

[7]  M. López-Amo,et al.  All-PM Fiber Loop Mirror Interferometer Analysis and Simultaneous Measurement of Temperature and Mechanical Vibration , 2018, Journal of Lightwave Technology.

[8]  O. Frazão,et al.  Fabry-Perot cavity based on silica tube for strain sensing at high temperatures. , 2015, Optics express.

[9]  X. Loh,et al.  Nanoparticle–Hydrogel Composites: Concept, Design, and Applications of These Promising, Multi‐Functional Materials , 2015, Advanced science.

[10]  Ignacio Paya-Zaforteza,et al.  New fiber optic sensor for monitoring temperatures in concrete structures during fires , 2017 .

[11]  Kevin Barraclough,et al.  I and i , 2001, BMJ : British Medical Journal.

[12]  J. N. Sharma,et al.  Embedded Fiber Optic Sensors Within Additive Layer Manufactured Components , 2013, IEEE Sensors Journal.

[13]  Xiaotian Zou,et al.  An experimental study on the concrete hydration process using Fabry–Perot fiber optic temperature sensors , 2012 .

[14]  C. Liao,et al.  Ultrasensitive Temperature Sensor Based on a Fiber Fabry–Pérot Interferometer Created in a Mercury-Filled Silica Tube , 2015, IEEE Photonics Journal.

[15]  Harith Ahmad,et al.  Fabrication and Characterization of Microbent Inline Microfiber Interferometer for Compact Temperature and Current Sensing Applications , 2017, Journal of Lightwave Technology.

[16]  Yong Zhao,et al.  Highly sensitive temperature sensor based on an ultra-compact Mach-Zehnder interferometer with side-opened channels. , 2017, Optics letters.

[17]  Taeoh Kim,et al.  Compact Biocompatible Fiber Optic Temperature Microprobe Using DNA-Based Biopolymer , 2018, Journal of Lightwave Technology.

[18]  Stephen J. Mihailov,et al.  Fiber Bragg Grating Sensors for Harsh Environments , 2012, Sensors.

[19]  L. A. Zenteno,et al.  Fiber Sagnac interferometer temperature sensor , 1997 .

[20]  D. Savastru,et al.  Study of thermo-mechanical characteristics of polymer composite materials with embedded optical fibre , 2018 .

[21]  R. Mülhaupt,et al.  Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.

[22]  Weilin Hou,et al.  High-resolution, large dynamic range fiber-optic thermometer with cascaded Fabry-Perot cavities. , 2016, Optics letters.

[23]  Alessandro Airoldi,et al.  Fibre optics health monitoring for aeronautical applications , 2015 .

[24]  N. Djilali,et al.  In-fibre Bragg grating sensors for distributed temperature measurement in a polymer electrolyte membrane fuel cell , 2009 .

[25]  Bo Liu,et al.  Sourceless optical fiber high temperature sensor. , 2016, Optics letters.

[26]  Miguel Torres-Cisneros,et al.  Optical fiber temperature sensor based on a microcavity with polymer overlay. , 2016, Optics express.

[27]  Ramyakrishna Pothu,et al.  Graphene-based membranes for CO2 separation , 2019, Materials Science for Energy Technologies.

[28]  A. Kersey,et al.  All-fibre 'michelson' thermometer , 1983 .

[29]  Stavros Pissadakis,et al.  A Fiber Optic Probe for Tumor Laser Ablation With Integrated Temperature Measurement Capability , 2017, Journal of Lightwave Technology.

[30]  Stephen C Warren-Smith,et al.  Interferometric high temperature sensor using suspended-core optical fibers. , 2016, Optics express.

[31]  M. Salvo,et al.  Towards self-diagnosis composites: Detection of moisture diffusion through epoxy by embedded evanescent wave optical fibre sensors , 2018, Polymer Testing.

[32]  Kenneth T. V. Grattan,et al.  Laser Cladding-Based Metallic Embedding Technique for Fiber Optic Sensors , 2018, Journal of Lightwave Technology.

[33]  Surface Plasmon Resonance-Based Optical Fiber Embedded in PDMS for Temperature Sensing , 2017, IEEE Journal of Selected Topics in Quantum Electronics.

[34]  D. Hand,et al.  Integrating Fiber Fabry-Perot Cavity Sensor Into 3-D Printed Metal Components for Extreme High-Temperature Monitoring Applications , 2017, IEEE Sensors Journal.

[35]  Hone-Ene Hwang,et al.  Highly Sensitive Air-Gap Fiber Fabry–Pérot Interferometers Based on Polymer-Filled Hollow Core Fibers , 2012, IEEE Photonics Technology Letters.

[36]  Yong Zhao,et al.  A Novel Optical Fiber Temperature Sensor Based on Fabry‐Perot Cavity , 2013 .

[37]  Jens Kobelke,et al.  Towards the control of highly sensitive Fabry-Pérot strain sensor based on hollow-core ring photonic crystal fiber. , 2012, Optics express.

[38]  O. Wolfbeis,et al.  Luminescent probes and sensors for temperature. , 2013, Chemical Society reviews.

[39]  Cheng-Ling Lee,et al.  Dual hollow core fiber-based Fabry-Perot interferometer for measuring the thermo-optic coefficients of liquids. , 2015, Optics letters.

[40]  W. Eickhoff,et al.  Temperature sensing by mode-mode interference in birefringent optical fibers. , 1981, Optics letters.