论文信息 - Non-overlapping concentrated windings in homopolar inductor machines

Non-overlapping concentrated windings in homopolar inductor machines

The work considers the issues connected with application of non-overlapping coils in the homopolar inductor machines. The calculation and analysis are performed for the magnetic field in the tooth zone of such a machine, and, based on the results, recommendations are given on the choice of optimal parameters of the tooth zone. The sample under study is a 32 kW experimental inductor generator.

S Orlova | V Pugachov | N Levin | M Konuhova

[1] H.-G. Herzog,et al. Axial flux machine with single tooth fractional slot winding - Comparison of different winding design approaches , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[2] P. Viarouge,et al. Synthesis of high performance PM motors with concentrated windings , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

[3] Nicola Bianchi,et al. Use of the star of slots in designing fractional-slot single-layer synchronous motors , 2006 .

[4] C. Sadarangani,et al. Winding factors and Joule losses of permanent magnet machines with concentrated windings , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[5] Jānis Dirba,et al. Optimization of the magnetic circuit of an axial inductor machine , 2009, 2009 13th European Conference on Power Electronics and Applications.

[6] Juliette Soulard,et al. PMSMs with Non-Overlapping Concentrated Windings : Design Guidelines and Model References , 2009 .

[7] Florence Meier. Permanent-Magnet Synchronous Machines with Non-Overlapping Concentrated Windings for Low-Speed Direct-Drive Applications , 2008 .

[8] Z. Q. Zhu,et al. Fractional slot permanent magnet brushless machines and drives for electric and hybrid propulsion systems , 2011 .