Assessment of the technical and economic potentials of biomass use for the production of steam, chemicals and polymers

Fossil fuel substitution with biomass is one of the measures to reduce carbon dioxide (CO2) emissions. This paper estimates the cost-effectiveness of raising industrial steam and producing materials (i.e. chemicals, polymers) from biomass. We quantify their long-term global potentials in terms of energy saving, CO2 emission reduction, cost and resource availability. Technically, biomass can replace all fossil fuels used for the production of materials and for generating low and medium temperature steam. Cost-effective opportunities exist for steam production from biomass residues and by substitution of high value petrochemicals which would together require more than 20 exajoules (EJ) of biomass worldwide in addition to baseline by 2030. Potentials could double in 2050 and reach 38–45EJ (25% of the total industrial energy use), with most demand in Asia, other developing countries and economies in transition. The economic potential of using biomass as chemical feedstock is nearly as high as for steam production, indicating its importance. The exploitation of these potentials depends on energy prices and industry’s access to biomass supply. Given the increasing competition for biomass from several economic sectors, more resource efficient materials need to be developed while steam production is already attractive due to its high effectiveness for reducing CO2 emissions per unit of biomass.

[1]  L. Bernstein,et al.  Industrial energy efficiency and climate change mitigation , 2009, Renewable Energy.

[2]  Ernst Worrell,et al.  Energy conversion strategies in the European paper industry : A case study in three countries , 2012 .

[3]  S. Rahmstorf,et al.  World in Transition. Future Bioenergy and Sustainable Land Use: Summary for Policy-Makers , 2008 .

[4]  Felix Creutzig,et al.  Reconciling top-down and bottom-up modelling on future bioenergy deployment , 2012 .

[5]  Global Energy Assessment Writing Team.  Global Energy Assessment: Toward a Sustainable Future , 2012 .

[6]  R. Schubert,et al.  Future Bioenergy and Sustainable Land Use , 2009 .

[7]  Göran Berndes,et al.  The contribution of biomass in the future global energy supply: a review of 17 studies , 2003 .

[8]  T. Beringer,et al.  The global technical potential of bio-energy in 2050 considering sustainability constraints , 2010, Current opinion in environmental sustainability.

[9]  Michael O'Hare,et al.  Greenhouse gas emissions from biofuels' indirect land use change are uncertain but may be much greater than previously estimated. , 2010, Environmental science & technology.

[10]  Martin Kumar Patel,et al.  Accounting for the constrained availability of land: a comparison of bio‐based ethanol, polyethylene, and PLA with regard to non‐renewable energy use and land use , 2012 .

[11]  Martin Kumar Patel,et al.  Environmental and Economic Aspects of Industrial Biotechnology , 2010 .

[12]  Wim Turkenburg,et al.  Exploration of the ranges of the global potential of biomass for energy , 2003 .

[13]  Detlef P. van Vuuren,et al.  Future bio-energy potential under various natural constraints , 2009 .

[14]  Wim Soetaert,et al.  Industrial biotechnology: sustainable growth and economic success , 2010 .

[15]  Ralph E.H. Sims,et al.  Direct and indirect land‐use competition issues for energy crops and their sustainable production – an overview , 2010 .

[16]  Kaija Hakala,et al.  Field biomass as global energy source , 2009 .

[17]  C. Herrmann,et al.  A Global Assessment of Manufacturing: Economic Development, Energy Use, Carbon Emissions, and the Potential for Energy Efficiency and Materials Recycling , 2013 .

[18]  I. Johansson,et al.  Surfactants from renewable resources , 2010 .

[19]  Eric D. Larson,et al.  A review of life-cycle analysis studies on liquid biofuel systems for the transport sector , 2006 .

[20]  T. Beringer,et al.  Bioenergy production potential of global biomass plantations under environmental and agricultural constraints , 2011 .

[21]  Martin Kaltschmitt,et al.  Assessment of global bioenergy potentials , 2011 .

[22]  Leo Schrattenholzer,et al.  Global bioenergy potentials through 2050 , 2001 .

[23]  Martin Kumar Patel,et al.  Reducing Industrial Energy Use and CO_2 Emissions: The Role of Materials Science , 2008 .

[24]  Stefan Bringezu,et al.  A Review of the Environmental Impacts of Biobased Materials , 2012 .

[25]  Martin Kumar Patel,et al.  Comparing the Land Requirements, Energy Savings, and Greenhouse Gas Emissions Reduction of Biobased Polymers and Bioenergy , 2003 .

[26]  Martin Kumar Patel,et al.  Medium and Long-term Opportunities and Risks of the Biotechnological Production of Bulk Chemicals from Renewable Resources , 2006 .

[27]  Danièle Revel,et al.  IPCC Special Report on Renewable Energy Sources and Climate Change Mitigation , 2011 .

[28]  Ernst Worrell,et al.  Present and future development in plastics from biomass , 2010 .

[29]  John Dixon,et al.  Development perspectives of the biobased economy: a review. , 2010 .

[30]  Veronika Dornburg,et al.  Scenario projections for future market potentials of biobased bulk chemicals. , 2008, Environmental science & technology.

[31]  A. Faaij,et al.  Biomas Assessment : Assessment of global biomass potentials and their links to food, water, biodiversity, energy demand and economy. Main report , 2008 .

[32]  Martin K. Patel,et al.  Plastics derived from biological sources: present and future: a technical and environmental review. , 2012, Chemical reviews.

[33]  M. Koper,et al.  The role of bioenergy in a fully sustainable global energy system. , 2012 .

[34]  A. Faaij,et al.  Potential of biomass energy out to 2100, for four IPCC SRES land-use scenarios , 2005 .

[35]  M. Thring.  World Energy Outlook , 1977 .

[36]  Dolf Gielen,et al.  The potential for renewable energy in industrial applications , 2012 .

[37]  Deger Saygin,et al.  Benchmarking the energy use of energy-intensive industries in industrialized and in developing countries , 2011 .

[38]  Benjamin C. McLellan,et al.  Renewable energy in the minerals industry: a review of global potential , 2012 .

[39]  A. Faaij,et al.  A bottom-up assessment and review of global bio-energy potentials to 2050 , 2007 .

[40]  Ernst Worrell,et al.  Steam systems in industry: Energy use and energy efficiency improvement potentials , 2001 .

[41]  Kornelis Blok,et al.  Potential of bioethanol as a chemical building block for biorefineries: preliminary sustainability assessment of 12 bioethanol-based products. , 2013, Bioresource technology.

[42]  Birka Wicke,et al.  Indirect land use change: review of existing models and strategies for mitigation , 2012 .

[43]  Martin Kumar Patel,et al.  Current policies affecting the market penetration of biomaterials* , 2011 .

[44]  Aie,et al.  Energy Technology Perspectives 2012 , 2006 .

[45]  Ralph E.H. Sims,et al.  Recognising the potential for renewable energy heating and cooling , 2008 .

[46]  L. Nilsson,et al.  Renewable energy costs, potentials, barriers: conceptual issues. , 2010 .

[47]  A. Faaij,et al.  Bioenergy revisited: Key factors in global potentials of bioenergy , 2010 .

[48]  Ingwald Obernberger,et al.  Techno-economic evaluation of selected decentralised CHP applications based on biomass combustion in IEA partner countries , 2004 .

[49]  Kimberley A Mullins,et al.  Policy implications of uncertainty in modeled life-cycle greenhouse gas emissions of biofuels. , 2011, Environmental science & technology.

[50]  G. Finnveden,et al.  Recycling revisited - life cycle comparisons of global warming impact and total energy use of waste management strategies , 2005 .