A new concept in obtaining a forming limit diagram of tailor welded blanks

Nowadays, tailor welded blanks (TWBs) have a great role to play in saving of cost, vehicle weight, and fuel consumption in automobile industries. A TWB constitutes blanks with different thicknesses and/or coatings and/or mechanical properties welded together prior to the stamping process. Owing to low formability of TWBs, determining and predicting the forming limit diagram (FLD) of these blanks enables manufacturers to produce non-imperfection parts. In this research, a modified type of Marciniak–Kuczynski (M–K) model was applied to determine the FLD of a TWB consisting of interstitial free (IF) galvanized steel sheet with different thicknesses (0.8 and 1.2 mm). Also, the effect of three yield criteria, namely Hill48, Hosford79, and BBC2002, on the predicted FLDs was investigated. During the analyses, the materials were assumed to follow the Hollomon work hardening rule. The experimental FLDs were determined utilizing the Hecker method. It was observed that the proposed method can properly predict the experimental FLD of a TWB with longitudinal welds and thickness ratios (TRs) greater than one, if proper parameters are being selected. Furthermore, the best prediction took place when the BBC2002 yield criterion was applied.

[1]  Influence of the Weld on the Mechanical Behaviour of Tailor Welded Blanks , 2006 .

[2]  Christopher Bayley,et al.  A bifurcation criterion for predicting weld-line failures in AA5754 alloy tailor-welded blanks , 2006 .

[3]  A. P. Karafillis,et al.  Prediction of localized thinning in sheet metal using a general anisotropic yield criterion , 2000 .

[4]  L. Chan,et al.  Weldment properties evaluation and formability study of tailor-welded blanks of different thickness combinations and welding orientations , 2007 .

[5]  W. Hosford,et al.  Metal Forming: Mechanics and Metallurgy , 1993 .

[6]  M. Abbasi,et al.  Formability Enhancement of Galvanized IF-Steel TWB by Modification of Forming Parameters , 2012, Journal of Materials Engineering and Performance.

[7]  Klaus Pöhlandt,et al.  Formability of Metallic Materials , 2000 .

[8]  Dorel Banabic,et al.  Prediction of the influence of yield locus on the limit strains in sheet metals , 2001 .

[9]  A. Akbarzadeh,et al.  Experimental and analytical studies on the prediction of forming limit diagrams , 2009 .

[10]  Luen Chow Chan,et al.  True stress-strain analysis on weldment of heterogeneous tailor-welded blanks - a novel approach for forming simulation , 2007 .

[11]  Wei Chen,et al.  A comparison study on the effectiveness of stepped binder and weld line clamping pins on formability improvement for tailor-welded blanks , 2008 .

[12]  Kwansoo Chung,et al.  Experimental and numerical study on formability of friction stir welded TWB sheets based on hemispherical dome stretch tests , 2009 .

[13]  M. Abbasi,et al.  Effect of different yield criteria on prediction of wrinkling initiation of interstitial-free galvanized steel sheet , 2011 .

[14]  Rinze Benedictus,et al.  Experimental and numerical study of machined aluminum tailor-made blanks , 2008 .

[15]  R Ganesh Narayanan,et al.  Predicting the forming limit strains of tailor-welded blanks , 2008 .

[16]  M. Khaleel,et al.  Forming-limit diagrams of aluminum tailor-welded blank weld material , 2001 .

[17]  Ramin Hashemi,et al.  An improved strain gradient approach for determination of deformation localization and forming limit diagrams , 2009 .

[18]  K. Narasimhan,et al.  FORMABILITY TESTING OF SHEET METALS , 1996 .

[19]  W. Chien,et al.  A combined necking and shear localization analysis for aluminum sheets under biaxial stretching conditions , 2004 .

[20]  R. Padmanabhan,et al.  Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks , 2007 .

[21]  Brad L. Kinsey,et al.  An Analytical Model for Tailor Welded Blank Forming , 2003 .

[22]  Z. Sheng.  Formability of tailor-welded strips and progressive forming test , 2008 .