FATIGUE DELAMINATION : A COMPARISON BETWEEN VIRTUAL CRACK CLOSURE AND COHESIVE ZONE SIMULATION TECHNIQUES

[1]  A. Pirondi,et al.  A study on fatigue crack propagation in thick composite adhesively bonded joints , 2013 .

[2]  I. Ashcroft,et al.  Fatigue damage modelling of adhesively bonded joints under variable amplitude loading using a cohesive zone model , 2011 .

[3]  A. Pirondi,et al.  A procedure for the simulation of fatigue crack growth in adhesively bonded joints based on the cohesive zone model and different mixed-mode propagation criteria , 2011 .

[4]  M. Bartsch,et al.  Simulation and experimental validation of mixed mode delamination in multidirectional CF/PEEK laminates under fatigue loading , 2011 .

[5]  A. D. Crocombe,et al.  Predicting fatigue damage in adhesively bonded joints using a cohesive zone model , 2010 .

[6]  Philippe H. Geubelle,et al.  A cohesive model for fatigue failure of polymers , 2005 .

[7]  K. N. Shivakumar,et al.  A virtual crack-closure technique for calculating stress intensity factors for cracked three dimensional bodies , 1988, International Journal of Fracture.

[8]  T. Siegmund,et al.  An irreversible cohesive zone model for interface fatigue crack growth simulation , 2003 .

[9]  M. Benzeggagh,et al.  Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading , 1997 .

[10]  I. Raju.  Calculation of strain-energy release rates with higher order and singular finite elements , 1987 .

[11]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .