Bearing fault diagnosis based on a new acoustic emission sensor technique

The diagnosis of bearing health by quantifying acoustic emission data has been an area of interest for recent years due to the numerous advantages over vibration-based techniques. However, most acoustic emission–based methodologies to date are data-driven technologies. This research takes a novel approach combining a heterodyne-based frequency reduction technique, time synchronous resampling, and spectral averaging to process acoustic emission signals and extract condition indicators for bearing fault diagnosis. The heterodyne technique allows the acoustic emission signal frequency to be shifted from several megahertz to less than 50 kHz, which is comparable to that of vibration-based techniques. Then, the digitized signal is band-pass filtered to retain the information associated with the bearing defects. Finally, the tachometer signal is used to time synchronously resample the acoustic emission data, allowing the computation of a spectral average which in turn enables the extraction and evaluation of condition indicators for bearing fault diagnosis. The presented technique is validated using the acoustic emission signals of seeded fault steel bearings on a bearing test rig. The result is an effective acoustic emission–based approach validated to diagnose all four fault types: inner race, outer race, ball, and cage.

[1]  P. Welch.  The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .

[2]  A. Braun,et al.  The Extraction of Periodic Waveforms by Time Domain Averaging , 1975 .

[3]  Takeo Yoshioka,et al.  A new acoustic emission source locating system for the study of rolling contact fatigue , 1982 .

[4]  P. D. McFadden,et al.  A revised model for the extraction of periodic waveforms by time domain averaging , 1987 .

[5]  H. M. Teager,et al.  Evidence for Nonlinear Sound Production Mechanisms in the Vocal Tract , 1990 .

[6]  P. D. McFadden,et al.  A technique for calculating the time domain averages of the vibration of the individual planet gears and the sun gear in an epicyclic gearbox , 1991 .

[7]  Steven Y. Liang,et al.  BEARING CONDITION DIAGNOSTICS VIA VIBRATION AND ACOUSTIC EMISSION MEASUREMENTS , 1997 .

[8]  P. D. McFadden,et al.  APPLICATION OF SYNCHRONOUS AVERAGING TO VIBRATION MONITORING OF ROLLING ELEMENT BEARINGS , 2000 .

[9]  D Mba,et al.  Bearing defect diagnosis and acoustic emission , 2003 .

[10]  Robert B. Randall,et al.  Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation) , 2005 .

[11]  David Mba,et al.  Development of Acoustic Emission Technology for Condition Monitoring andDiagnosis of Rotating Machines; Bearings, Pumps, Gearboxes, Engines and RotatingStructures. , 2006 .

[12]  D. Mba.  The Use of Acoustic Emission for Estimation of Bearing Defect Size , 2008 .

[13]  Eric Bechhoefer,et al.  A Review of Time Synchronous Average Algorithms , 2009 .

[14]  Ming Liang,et al.  Fault severity assessment for rolling element bearings using the Lempel–Ziv complexity and continuous wavelet transform , 2009 .

[15]  Ruoyu Li,et al.  Data Mining Based Full Ceramic Bearing Fault Diagnostic System Using AE Sensors , 2011, IEEE Transactions on Neural Networks.

[16]  Junda Zhu,et al.  Development and evaluation of AE based condition indicators for full ceramic bearing fault diagnosis , 2011, 2011 IEEE Conference on Prognostics and Health Management.

[17]  Karl Nienhaus,et al.  Development of Acoustic Emission (AE) based defect parameters for slow rotating roller bearings , 2012 .

[18]  Jay Lee,et al.  Novel method for rolling element bearing health assessment—A tachometer-less synchronously averaged envelope feature extraction technique , 2012 .

[19]  Chang Liu,et al.  Clustering diagnosis of rolling element bearing fault based on integrated Autoregressive/Autoregressive Conditional Heteroscedasticity model , 2012 .

[20]  Wenbo Lu,et al.  A fault diagnosis scheme of rolling element bearing based on near-field acoustic holography and gray level co-occurrence matrix , 2012 .

[21]  Xiaofeng Liu,et al.  Application of correlation matching for automatic bearing fault diagnosis , 2012 .

[22]  Andrew Ball,et al.  A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic Emission , 2012 .

[23]  Michael Pecht,et al.  Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis , 2013 .

[24]  David He,et al.  Processing for improved spectral analysis , 2013 .

[25]  Changqing Shen,et al.  A novel adaptive wavelet stripping algorithm for extracting the transients caused by bearing localized faults , 2013 .

[26]  David He,et al.  Full ceramic bearing fault diagnosis using LAMSTAR neural network , 2013, 2013 IEEE Conference on Prognostics and Health Management (PHM).

[27]  Fanrang Kong,et al.  Wayside acoustic diagnosis of defective train bearings based on signal resampling and information enhancement , 2013 .

[28]  Jun Wang,et al.  Exchanged ridge demodulation of time-scale manifold for enhanced fault diagnosis of rotating machinery , 2014 .

[29]  Jing Wang,et al.  Basic pursuit of an adaptive impulse dictionary for bearing fault diagnosis , 2014, 2014 International Conference on Mechatronics and Control (ICMC).

[30]  Eric Bechhoefer,et al.  A New Acoustic Emission Sensor Based Gear Fault Detection Approach , 2020 .