Crashworthiness design of multi-corner thin-walled columns

This paper presents a crashworthiness design of regular multi-corner thin-walled columns with different types of cross-sections and different profiles, including straight octagonal columns and curved hexagonal columns. In this paper, the straight octagonal section columns are first optimized, which mainly take axial crash loads during crashes. Next, the curved hexagonal section columns are optimized following the same approach, which are subject to bending moment when impact occurs. During the design optimizations, specific energy absorption (SEA) is set as the design objective, side length of the cross-sections and wall thickness are selected as design variables, and maximum crushing force (Pm )i s set as the design constraint. Both the objective and constraint are formulated using the response surface method (RSM) based on sets of finite element (FE) results obtained from FE analyses (FEA). After obtaining the optimal designs, parametric studies are performed to investigate the influences of the design variables on the crash performance of such multi-corner thin-walled columns.

[1]  Hasan Kurtaran,et al.  Application of response surface methodology in the optimization of cutting conditions for surface roughness , 2005 .

[2]  Qing Li,et al.  Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria , 2007 .

[3]  T. Wierzbicki,et al.  Axial Crushing of Multicorner Sheet Metal Columns , 1989 .

[4]  Dimitrios E. Manolakos,et al.  Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section , 2003 .

[5]  Yujiang Xiang,et al.  Optimal crashworthiness design of a spot-welded thin-walled hat section , 2006 .

[6]  R. H. Myers,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[7]  Larsgunnar Nilsson,et al.  Evaluation of response surface methodologies used in crashworthiness optimization , 2006 .

[8]  Jan Holnicki-Szulc,et al.  High-performance impact absorbing materials—the concept, design tools and applications , 2003 .

[9]  Soo-Ik Oh,et al.  Cylindrical tube optimization using response surface method based on stochastic process , 2002 .

[10]  Yunbo Liu,et al.  Development of simplified thin-walled beam models for crashworthiness analyses , 2007 .

[11]  G. L. Viegelahn,et al.  Energy dissipation and associated failure modes when axially loading polygonal thin-walled cylinders , 1991 .

[12]  Yunbo Liu,et al.  Development of simplified finite element models for straight thin-walled tubes with octagonal cross section , 2007 .

[13]  Kamran Behdinan,et al.  A material and gauge thickness sensitivity analysis on the NVH and crashworthiness of automotive instrument panel support , 2003 .