A study of wind speed modification and internal boundary-layer heights in a coastal region

Wind profile data within the first two kilometres of a coast have been used to study the wind field modification downstream of this surface discontinuity. The land area is generally very flat, having an overall roughness length of 0.04 m. A wind model, suitable for practical applications and inexpensive to run, has been tested against the data and was found to give satisfactory results. Knowing the climatological statistics of wind and stratification, e.g., at the coast, the model may thus be used to estimate, on a climatological basis, how the wind field is modified with distance inland, at least in areas with only minor topography. This type of information is of great importance when locating wind turbines. It is in these cases also important to know the statistics of the internal boundary-layer (IBL) height, as the turbulence intensity may be quite different in and above the IBL, which in turn may influence load and fatigue calculations. Using the wind profile data, the IBL height was clearly discernible in the majority of cases. Having very unstable stratification over land, the IBL height could, however, not be determined from the wind profiles, as the wind in these cases did not decrease inland. This result was also obtained using the wind model. A simple model of the type zIBL = a · xb, was instead tested, and was shown to give reasonable results.

[1]  U. Högström,et al.  A Practical Method for Determining Wind Frequency Distributions for the Lowest 200 m from Routine Meteorological Data , 1978 .

[2]  E. F. Bradley.  A micrometeorological study of velocity profiles and surface drag in the region modified by a change in surface roughness , 1968 .

[3]  A. Smedman,et al.  Flow characteristics above a very low and gently sloping hill , 1984 .

[4]  M. Gamo,et al.  Airborne Measurements of the Free Convective Internal Boundary Layer During the Sea Breeze , 1982 .

[5]  E. W. Peterson,et al.  Modification of mean flow and turbulent energy by a change in surface roughness under conditions of neutral stability , 1969 .

[6]  R. Bornstein,et al.  Urban-rural wind velocity differences , 1977 .

[7]  L. Enger.  A higher order closure model applied to dispersion in a convective PBL , 1986 .

[8]  E. Peterson,et al.  Some observations and analysis of wind over non‐uniform terrain , 1976 .

[9]  Hans Bergström,et al.  A Simplified Boundary Layer Wind Model for Practical Application. , 1986 .

[10]  U. Högström,et al.  A Critical Evaluation of the Aerodynamical Error of a Turbulence Instrument , 1982 .

[11]  F. Pasquill,et al.  Some aspects of boundary layer description , 1972 .

[12]  W. Elliott,et al.  The growth of the atmospheric internal boundary layer , 1958 .

[13]  D. H. Wood,et al.  Internal boundary layer growth following a step change in surface roughness , 1982 .

[14]  The turbulent structure of the internal boundary layer near the shore , 1985 .

[15]  U. Högström,et al.  The Uppsala urban meteorology project , 1978 .

[16]  J. Andre,et al.  Modeling the 24-Hour Evolution of the Mean and Turbulent Structures of the Planetary Boundary Layer , 1978 .

[17]  Turbulent characteristics of a shallow convective internal boundary layer , 1983 .

[18]  G. S. Raynor,et al.  Formation and Characteristics of Coastal Internal Boundary Layers During Onshore Flows , 1979 .

[19]  G. Mellor,et al.  A Hierarchy of Turbulence Closure Models for Planetary Boundary Layers. , 1974 .

[20]  Jørgen Højstrup,et al.  A simple model for the adjustment of velocity spectra in unstable conditions downstream of an abrupt change in roughness and heat flux , 1981 .