A multi-beam intensity-based approach for lubricant film measurements in non-conformal contacts

Abstract Studies of elastohydrodynamic lubrication (EHL) frequently utilize the phenomenon of optical interference which is exhibited when an illuminated steel ball is in contact with a partially Cr-coated glass disc in conjunction with a lubricant layer of known refractive index. The use of the steel and chromium surfaces enables lubricants having similar refractive indices to glass to be examined. The EHL contact is composed of two microscopically thin layers: the Cr coating and the lubricant film, bounded by the glass disc and the steel ball. That the two-beam interference method frequently used in optical EHL research may induce significant errors in the measurement of film thickness is reported in this paper. A theoretical analysis which includes consideration of the effects of both multi-beam interference and optical absorption within the Cr film and the steel surface is presented. The analysis is used to devise a multi-beam intensity-based test technique which has been validated for a wide range of lubricant film thickness measurements at a resolution of 1 nm and offers a practical minimum detectable film thickness as thin as 1 nm.

[1]  Motohiro Kaneta,et al.  Formation of dimples in elliptical EHL contacts , 2000 .

[2]  E. Palik.  Handbook of Optical Constants of Solids , 1997 .

[3]  J. Molimard,et al.  New tools for the experimental study of EDH and limit lubrications , 1999 .

[4]  Motohiro Kaneta,et al.  Effects of elastic moduli of contact surfaces in elastohydrodynamic lubrication , 1992 .

[5]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results , 1976 .

[6]  S. Wen,et al.  Thin film lubrication. Part I. Study on the transition between EHL and thin film lubrication using a relative optical interference intensity technique , 1996 .

[7]  Hugh Spikes,et al.  The Development of a Spacer Layer Imaging Method (SLIM) for Mapping Elastohydrodynamic Contacts , 1996 .

[8]  R. Gohar,et al.  Optical Measurement of Oil Film Thickness under Elasto-hydrodynamic Lubrication , 1963, Nature.

[9]  O. S. Heavens,et al.  Optical Properties of Thin Solid Films , 2011 .

[10]  P Ehret,et al.  Observation of Kaneta's dimples in elastohydrodynamic lubrication contacts , 2001 .

[11]  Hugh Spikes,et al.  The development and application of the spacer layer imaging method for measuring lubricant film thickness , 2001 .

[12]  Motohiro Kaneta,et al.  Abnormal Phenomena Appearing in EHL Contacts , 1996 .

[13]  Hugh Spikes,et al.  The Measurement and Study of Very Thin Lubricant Films in Concentrated Contacts , 1991 .

[14]  Jérôme Molimard,et al.  Thin Film Colorimetric Interferometry , 2001 .

[15]  Miroslav Liška,et al.  Differential colorimetry: tool for evaluation of chromatic interference patterns , 1997 .

[16]  Shizhu Wen,et al.  The Failure of Fluid Film at Nano-Scale , 1999 .

[17]  P. L. Wong,et al.  Optical characteristics of thin film coating and measurement of its thickness , 1997 .

[18]  広 久保田,et al.  Principle of Optics , 1960 .

[19]  R. Gohar,et al.  Theoretical and experimental studies of the oil film in lubricated point contact , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.