Transformation of the Metastable Al6Fe Intermetallic Phase during Homogenization of a Binary Al-Fe Alloy

Within the scope of this research the transformation of the Al6Fe metastable phase was analyzed via Differential Scanning Calorimetry (DSC), optical and Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). A binary Al-Fe1.1 low-impurity alloy was produced with refined raw materials in a controlled environment. With a cooling rate of 35 K/s, solidification of the Al6Fe metastable phase was achieved. The samples were homogenized at 600 °C for 2–24 h. Results of a qualitative analysis of metallographic samples show that the transformation began on grain boundaries, forming an Fe-phase free region, but after 2 h began to take place within the eutectic region. The transformation is mostly complete after 12 h, but after 24 h of homogenization it is fully complete as all samples, except the 24 h homogenized one, contain both the metastable Al6Fe and the stable Al13Fe4 phase.

[1]  B. Žužek,et al.  Homogenisation Efficiency Assessed with Microstructure Analysis and Hardness Measurements in the EN AW 2011 Aluminium Alloy , 2021, Metals.

[2]  J. Medved,et al.  Effects of Homogenization Conditions on the Microstructure Evolution of Aluminium Alloy EN AW 8006 , 2020, Metals.

[3]  J. Berneder,et al.  Mechanical Properties Evolution for 8xxx Foil Stock Materials by Alloy Optimization—Literature Review and Experimental Research , 2019, Light Metals 2019.

[4]  Santosh T Soans,et al.  Understanding the Basics , 2018, Indian Pediatrics.

[5]  H. Henein,et al.  Microstructure Evolution of Atomized Al-0.61 wt pct Fe and Al-1.90 wt pct Fe Alloys , 2011 .

[6]  D. Eskin,et al.  Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys , 2005 .

[7]  D. Scott MacKenzie,et al.  Handbook of Aluminum : Vol. 1: Physical Metallurgy and Processes , 2003 .

[8]  D. Eskin,et al.  Iron in Aluminium Alloys: Impurity and Alloying Element , 2002 .

[9]  B. Cantor,et al.  Intermetallic phase selection in 1XXX Al alloys , 1998 .

[10]  B. Cantor,et al.  A Calorimetric Evaluation of the Role of Impurities in the Nucleation of Secondary Phases in 1xxx Al Alloys , 1997 .

[11]  D. Liang,et al.  Composition and solidification microstructure selection in the interdendritic matrix between primary Al3Fe dendrites in hypereutectic AlFe alloys , 1996 .

[12]  D. Liang,et al.  The effect of growth velocity on growth temperature of the Al-Al3Fe and Al-Al6Fe eutectics , 1992 .

[13]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .

[14]  J. Hatch,et al.  Aluminum: Properties and Physical Metallurgy , 1984 .

[15]  T. W. Clyne,et al.  An AlFe intermetallic phase formed during controlled solidification , 1981 .

[16]  L. F. Mondolfo.  Aluminum alloys: Structure and properties , 1976 .

[17]  張弓 小菅,et al.  高温加熱時のAl-Fe-si合金中の縦ノ木組織の挙動 , 1972 .

[18]  A. Tonejc.  X-ray study of the decomposition of metastable Al-rich Al-Fe solid solutions , 1971 .

[19]  L. Walford.  The structure of the intermetallic phase FeAl6 , 1965 .