An Experimental and Computational Investigation of a Translating Throat Single Expansion-Ramp Nozzle

A translating throat single expansion-ramp nozzle (SERN) concept was designed to improve the off-design performance of a SERN with a large, fixed expansion ratio. The concept of translating the nozzle throat provides the SERN with a variable expansion ratio. An experimental and computational study was conducted to predict and verify the internal performance of this concept. Three nozzles with expansion ratios designed for low, intermediate, and high Mach number operating conditions were tested in the Jet-Exit Test Facility at the NASA Langley Research Center. Each nozzle was tested with a conclave and convex geometric expansion ramp surface design. Internal nozzle performance, paint-oil flow and focusing Schlieren flow visualization were obtained for nozzle pressure ratios (NPRs) up to 13. The Navier-Stokes code, PAB3D, with a k-epsilon turbulence model was utilized to verify experimental results at selected NPRs and to predict the performance at conditions unatainable in the test facility. Two-dimensional simulations were computed with near static free-stream conditions and at nozzle pressure ratios of 5, 9, and 13 for the concave ramp, low Mach number configuration and at the design NPR of 102 for the concave ramp, high Mach number configuration. Remarkable similarities between predicted and experimental flow characteristics, as well as performance quantities, were obtained.

[1]  A. Kuchar,et al.  Preliminary assessment of exhaust systems for high Mach (4 to 6) fighter aircraft , 1989 .

[3]  M. L. Mason,et al.  Experimental and analytical investigation of a nonaxisymmetric wedge nozzle at static conditions , 1978 .

[4]  Donald Johnson,et al.  NASP derived vehicles - Not just to space , 1992 .

[5]  E. A. Bare,et al.  Static internal performance of convergent single-expansion-ramp nozzles with various combinations of internal geometric parameters , 1984 .

[6]  Irwin E. Treager.  Aircraft Gas Turbine Engine Technology , 1978 .

[7]  Earl R. Keener,et al.  Experimental results for a hypersonic nozzle/afterbody flow field , 1992 .

[8]  D. Dusa.  High Mach propulsion system installation and exhaust system design considerations , 1987 .

[9]  Khaled S. Abdol-Hamid,et al.  Implementation of Algebraic Stress Models in a General 3-D Navier-Stokes Method (PAB3D) , 1995 .

[10]  Tetsuo Hiraiwa,et al.  Three-dimensional analysis of scramjet nozzle flows , 1993 .

[11]  Leonard M. Weinstein,et al.  An improved large-field focusing schlieren system , 1991 .

[12]  W. Jones,et al.  The prediction of laminarization with a two-equation model of turbulence , 1972 .

[13]  Seung-Ho Lee,et al.  Single expansion ramp nozzle simulations , 1992 .

[14]  Khaled S. Abdol-Hamid,et al.  Application of Navier-Stokes code PAB3D with kappa-epsilon turbulence model to attached and separated flows , 1995 .

[15]  Khaled Abdol-Hamid.  Application of a multiblock/multizone code (PAB3D) for the three-dimensional Navier-Stokes equations , 1991 .

[16]  John R. Carlson,et al.  Application of Navier-Stokes Code PAB3D With k-c Turbulence Model to Attached and Separated Flows , 1995 .

[17]  John R. Carlson,et al.  Prediction of static performance for single expansion ramp nozzles , 1993 .

[18]  M. Pierce,et al.  A computational exploration of the importance of three-dimensionality, boundary layer development, and flow chemistry to the prediction of scramjet nozzle performance , 1991 .

[19]  Hugh W. Coleman,et al.  Experimentation and Uncertainty Analysis for Engineers , 1989 .

[20]  R L Maltby,et al.  FLOW VISUALIZATION IN WIND TUNNELS USING INDICATORS , 1962 .

[21]  P. Roe.  CHARACTERISTIC-BASED SCHEMES FOR THE EULER EQUATIONS , 1986 .

[22]  Milton Lamb,et al.  Supersonic investigation of two dimensional hypersonic exhaust nozzles , 1992 .

[23]  B. Leer,et al.  Flux-vector splitting for the Euler equations , 1997 .

[24]  B. L. Berrier,et al.  Static internal performance of single-expansion-ramp nozzles with thrust-vectoring capability up to 60 deg , 1984 .

[25]  Charles E. Mercer,et al.  Data reduction formulas for the 16-foot transonic tunnel: NASA Langley Research Center, revision 2 , 1992 .

[26]  B. L. Berrier,et al.  Operating Characteristics of the Multiple Critical Venturi System and Secondary Calibration Nozzles Used for Weight-Flow Measurements in the Langley 16-Foot Transonic Tunnel , 1985 .