Radio Frequency Time-of-Flight Distance Measurement for Low-Cost Wireless Sensor Localization

Location-aware wireless sensor networks will enable a new class of applications, and accurate range estimation is critical for this task. Low-cost location determination capability is studied almost entirely using radio frequency received signal strength (RSS) measurements, resulting in poor accuracy. More accurate systems use wide bandwidths and/or complex time-synchronized infrastructure. Low-cost, accurate ranging has proven difficult because small timing errors result in large range errors. This paper addresses estimation of the distance between wireless nodes using a two-way ranging technique that approaches the Cramér-Rao Bound on ranging accuracy in white noise and achieves 1-3 m accuracy in real-world ranging and localization experiments. This work provides an alternative to inaccurate RSS and complex, wide-bandwidth methods. Measured results using a prototype wireless system confirm performance in the real world.

[1]  Laurent Ouvry,et al.  A 1.1nJ/b 802.15.4a-compliant fully integrated UWB transceiver in 0.13µm CMOS , 2009, 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[2]  R.L. Moses,et al.  Locating the nodes: cooperative localization in wireless sensor networks , 2005, IEEE Signal Processing Magazine.

[3]  Khawza I. Ahmed,et al.  WSN06-3: Improving Two-Way Ranging Precision with Phase-offset Measurements , 2006, IEEE Globecom 2006.

[4]  Ahmed H. Tewfik,et al.  Localization in wireless sensor networks under non line-of-sight propagation , 2005, GLOBECOM '05. IEEE Global Telecommunications Conference, 2005..

[5]  A. Gualtierotti H. L. Van Trees, Detection, Estimation, and Modulation Theory, , 1976 .

[6]  Ramy Farha,et al.  Multipath delay estimations using matrix pencil , 2003, 2003 IEEE Wireless Communications and Networking, 2003. WCNC 2003..

[7]  Michael A. Jensen,et al.  Modeling the statistical time and angle of arrival characteristics of an indoor multipath channel , 2000, IEEE Journal on Selected Areas in Communications.

[8]  Ankur Mehta,et al.  Reducing Average Power in Wireless Sensor Networks through Data Rate Adaptation , 2009, 2009 IEEE International Conference on Communications.

[9]  Mark A. Richards,et al.  Fundamentals of Radar Signal Processing , 2005 .

[10]  Ankur Mehta,et al.  Mitigating Multipath Fading through Channel Hopping in Wireless Sensor Networks , 2010, 2010 IEEE International Conference on Communications.

[11]  Juha-Pekka Makela,et al.  Indoor geolocation science and technology , 2002, IEEE Commun. Mag..

[12]  A. Molisch,et al.  IEEE 802.15.4a channel model-final report , 2004 .

[13]  M. Melamed Detection , 2021, SETI: Astronomy as a Contact Sport.

[14]  D. Kirchner,et al.  Two-way time transfer via communication satellites , 1991, Proc. IEEE.

[15]  Christian Hoene,et al.  Four-way TOA and software-based trilateration of IEEE 802.11 devices , 2008, 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications.

[16]  M. Vossiek,et al.  Precise distance measurement with IEEE 802.15.4 (ZigBee) devices , 2008, 2008 IEEE Radio and Wireless Symposium.

[17]  Jan M. Rabaey,et al.  An RF ToF Based Ranging Implementation for Sensor Networks , 2006, 2006 IEEE International Conference on Communications.

[18]  Kristofer S. J. Pister,et al.  RF Ranging Methods and Performance Limits for Sensor Localization , 2009 .

[19]  Martin Vossiek,et al.  Multi-Channel Distance Measurement With IEEE 802.15.4 (ZigBee) Devices , 2009, IEEE Journal of Selected Topics in Signal Processing.